住宅电气设计中应注意的细节问题

就住宅电气设计中，常常被忽略的细节问题进行阐述，提出了在住宅室内几个功能区内，如何使灯具和插座的布置更合理，以最大限度地满足居住者的需求。     

Effects of Light, Oxygen, and pH on the Absorbance of 2,2-Diphenyl-1-picrylhydrazyl

ABSTRACT: The absorbance of 2,2-diphenyl-1-picrylhydrazyl (DPPH) at 517 nm in methanol and acetone decreased by 20 and 35% for 120 min at 25 °C under light, respectively; in the dark it did not change significantly for 150 min. Decomposition of DPPH under 21% oxygen after 90 min under light was significantly higher than that under 1% oxygen. Absorbance of DPPH in pH 4 buffer solution in methanol, and in pH 10 buffer solution in acetone, decreased by 55 and 80%, respectively, under light for 120 min. The evaluation of antioxidant activity by the changes of DPPH absorbance should be carefully interpreted since the absorbance of DPPH at 517 nm is decreased by light, oxygen, pH, and type of solvent in addition to the antioxidant.     

Synthesis and characterization of novel copolymers with the trimethylsilyl group for deep‐UV photoresists

N‐(4‐Acetoxyphenyl) maleimide (APMI) and three kinds of comonomers bearing a trimethylsilyl group were copolymerized at 60°C in the presence of azobisisobutyronitrile (AIBN) as an initiator in 1,4‐dioxane to obtain the three IP, IIP, and IIIP copolymers. These copolymers were removed from the acetoxy group in a transesterification process into new IVP, VP, and VIP copolymers with a pendant hydroxyl group. Two modified processes were adopted to prepare photoresists using these copolymers. The first process involved mixing the dissolution inhibitor, o‐nitrobenzyl cholate, with the new copolymers. Second, o‐nitrobenzyl cholate was introduced into the copolymers using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in dimethylformamide (DMF). The cyclic maleimide structure is responsible for the high thermal stability of these copolymers. After irradiation using deep–UV light and development with aqueous Na₂CO₃ (0.01 wt %), the developed patterns showed positive images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of these resists was at least 0.8 μm and an oxygen‐plasma etching rate was 1/5.3 to that of hard‐baked HPR‐204. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2791–2798, 2002; DOI 10.1002/app.10255     

自发参量下转换光场的实验研究进展综述

自发参量下转换(spontaneous parametric down-conversion,SPDC)光场是基于单色泵浦光子流和量子真空噪声对非线性晶体的综合作用而产生的,它固有的量子起源决定了在非经典光场研究中的重要地位和作用.对SPDC光场的相干特性和它在绝对测量光电探测器量子效率中的应用进行了深入而细致的研究和探讨.     

An Arctangent Unwrapping Technique of Photoelasticity Using Linearly Polarized Light at Three Wavelengths

Abstract:  In the automatic measurements of the principal stress directions ψ and the total relative phase retardation ρ _tol, ψ and ρ _tol can be easily obtained by the phase unwrapping method using the arctangent function. However, only some published works exist on the measurements of ψ and ρ _tol by photoelastic techniques using a linearly polarised incident light source. This paper presents the technique of applying an unwrapping by means of the arctangent function to photoelasticity. The technique overcomes the error associated with the quarter-wave plate by using an incident light of different wavelength and does not need an interpolation for the determination of ψ . The technique is validated by determining ψ and ρ _tol for the well-known circular disk subjected to a diametral compressive load model.     

定电流对LED的重要性

高功率超高亮度LED已经开始大量应用.要实际体现LED(尤其是高功率超高亮度LED)的优点,采用定电流驱动方式必要条件之一.     

Mechanoluminescent pulse pressure sensors. Processing of output optical signal

The process of mechanoluminescence transformation of a pulse pressure sensor is considered. The process consists in excitation of emission under the action of mechanical loading. An algorithm for use in processing the output optical signal of the sensor that makes it possible to determine an input shock pulse is presented. __________ Translated from Izmeritel’naya Tekhnika, No. 10, pp. 28–31, October, 2007.     

轻钢结构浅析

轻钢结构作为一种新型结构在近几年发展很快，应用范围也日趋广泛。主要针对轻钢结构的特点，结合实际工程设计，对轻钢结构现状、发展进行了阐述和分析。     

A unified proposal for characteristic testing methods and figure of merit of 8‐kV/3.5‐kVA class light‐triggered thyristors

Power devices with high capability have been developed. 8‐kV/3.5‐kA‐class light‐triggered thyristors have the highest capability among power devices. These devices are used in the Kii Channel HVDC transmission system in Japan. In this paper, we report the extracted problems of conventional testing methods of 8‐kV/3.5‐kA‐class light‐triggered thyristors among manufacturers, and the proposed unified testing methods on the basis of element characteristics and operating conditions in the Kii Channel HVDC system. Furthermore, we propose a figure of merit for power devices for the practical use, and try to extract elements used at the Kii Channel HVDC system with small margins and low withstand capabilities. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 140(3): 61–70, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10024     

MGD工艺技术的特点

应炼油厂要求，FCC既要多产柴油，又需多产液化气，石油化工科学研究院开发了MGD工艺。该工工艺遵循催化裂化的反应机理，把分段进料和汽油回炼紧密组合为一个体系，较好地达到了用掺渣油原料多产柴油和液化气的目的，其汽油烯烃和硫含量降低。从而使炼油厂调合汽油达到产品规格。工艺实施容易，改造投入少、见效快，受到炼油厂欢迎，并迅速推广应用。浅释了MGD工艺的反应机理，并提出了应用中应该注意的问题。