STM32的双路信号源及其配置平台设计

针对目前测量分析、弱信号检测的需求,以STM32F107和AD9958为核心实现了一种高分辨率幅度、频率、相位的双路信号源。首先对直接数字合成(Direct Digital Synthesis,DDS)工作原理进行介绍,重点分析了杂散的主要来源,并设计LC椭圆低通滤波器对杂散进行抑制。设计输出电路使信号源满足低频需求,并可直接用于驱动负载。最后采用STM32F107和VC6.0搭建了配置平台,对信号源波形灵活控制。     

STM32F107的停车引导系统设计

本文设计的停车诱导系统以STM32F107微控制器为核心处理器,由RFID读卡器组成检测电路,用来检测停车场的车辆通过情况;有源RFID的无线模块发送信号,由检测模块将检测信号上传至上位机,由上位机控制停车场地面的指示灯(用来指示是否有车辆通过)的开启与关闭.采用Modbus通信协议进行控制和监控,实现了与外界环境相结合的人为可控智能闭环系统.     

Molecular Dynamics of CYFIP2 Protein and Its R87C Variant Related to Early Infantile Epileptic Encephalopathy

The CYFIP2 protein (cytoplasmic FMR1-interacting protein 2) is part of the WAVE regulatory complex (WRC). CYFIP2 was recently correlated to neurological disorders by the association of the R87C variant with early infantile epileptic encephalopathy (EIEE) patients. In this set of syndromes, the epileptic spasms and seizures since early childhood lead to impaired neurological development in children. Inside the WRC, the variant residue is at the CYFIP2 and WAVE1 protein interface. Thus, the hypothesis is that the R87C modification weakens this interaction, allowing the WRC complex’s constant activation. This work aimed to investigate the impacts of the mutation on the structure of the WRC complex through molecular dynamics simulation. For that, we constructed WRC models containing WAVE1-NCKAP1 proteins complexed with WT or R87C CYFIP2. Our simulations showed a flexibilization of the loop comprising residues 80–110 due to the loss of contacts between internal residues in the R87C CYFIP2 as well as the key role of residues R/C87, E624, and E689 in structural modification. These data could explain the mechanism by which the mutation impairs the stability and proper regulation of the WRC.     

动力后坐试验台数据采集系统设计与实现

为满足动力后坐试验台位移、速度数据高速采集的要求,介绍了一种以增量式编码器为位移传感器、以STM32F107VCT6MCU为下位机数据采集模块,采用MicrosoftVc＋＋6．0开发上位机试验软件的动力后坐试验台位移速度采集系统,实现了对试验中位移、速度数据的高速采集,并利用TeeChart控件实现速度位移曲线的绘制。现场试验结果表明该系统达到了设计要求,实现了数据的高速采集和曲线显示。     

基于STM 32的电源分配单元设计

PDU（Power Distribution Unit,电源分配单元）又被称作远程电源管理器,是新一代智能电力分配管理设备。PDU通过引入以太网技术、语音服务等新颖的通讯手段,构成了远程控制和智能管理的电源分配系统。PDU具有多种特性,如：远程控制、集中式管理、自动周期控制、安全性管理、可靠性管理及可扩展性等。本文基于STM 32F107芯片设计开发了一种PDU方案,并用于控制机房。测试过程表明本方案安全可靠,用户可以远程查看机房的实时用电情况和已用电量,控制单路通道的开通或关断,限制单路的用电功率等等。     

The Region 1 & 3 Broadcasting‐Satellite Service Plan after WRC‐03

The 1977 Broadcasting‐Satellite Service (BSS) Plan for Region 1 & 3 had been widely acknowledged to be out‐of‐date by the late 1980s. Development of digital modulation in the early 1990s provided an opportunity to update the technical provisions of the Plan to make it more economically viable. After a decade of work and three World Radiocommunication Conferences (WRCs), the revision of Region 1 & 3 BSS Plan was finally completed in 2003. The new Plan increased channel assignments from 5 to 10 analog‐equivalent channels for each country in Region 1, and from 4 to 12 channels for each country in Region 3. Yet, despite the increase in capacity, the new Plan is surprisingly similar to the original one in terms of the technical parameters. It is still based on national coverage, and the channel plan, orbital location, orbital spacing, and polarization are also the same. As a result, the new Plan is no more economically viable to implement than the old. To create economically viable BSS systems would most likely require modifications to the assignment in the Plan. Yet, modification procedures were made more difficult to apply after replanning. Less future implementation of BSS networks than would otherwise have occurred can be expected, and an inefficient usage of these frequency bands will likely result. On the other hand, less implemented systems will mean more capacity set aside for future use. This is important for countries that currently do not have satellite operations. In the end, BSS replanning reflects the eternal conflict between efficient usage and guaranteed future access. Copyright © 2005 John Wiley & Sons, Ltd.     

Measurements of keV-neutron capture cross sections and capture gamma-ray spectra of 105Pd

The neutron capture cross sections and capture gamma-ray spectra of ¹⁰⁵Pd were measured in the region from 15 to 100 keV and at 585 keV. A neutron time-of-flight method was utilised with an anti-Compton NaI(Tl) spectrometer and a 1.5-ns pulsed neutron source by the ⁷Li(p,n)⁷Be reaction. The capture yields were obtained by applying a pulse-height weighting technique to the observed net capture gamma-ray pulse-height spectra. The capture cross sections of ¹⁰⁵Pd were derived with errors less than 5%, using the standard capture cross sections of ¹⁹⁷Au. The evaluated capture cross sections of JENDL-4.0 and ENDF/B-VII.1 were compared with the present results. The evaluations of JENDL-4.0 and ENDF/B-VII.1 were larger than the present results by 3%–15% in the region from 15 to 100 keV and at 585 keV. The capture gamma-ray spectra of ¹⁰⁵Pd were also derived by unfolding the observed net capture gamma-ray pulse-height spectra. The multiplicities of capture gamma rays of ¹⁰⁵Pd were obtained from the capture gamma-ray spectra.     

ZL107合金热力学显微组织分析

应用热力学计算对平衡条件下ZL107合金组织进行了定量分析,研究了化学成分和温度对ZL107合金组织的影响规律,并对该合金的显微组织进行了观察。结果表明,ZL107合金中Al2Cu强化析出相开始析出温度及数量主要取决于Cu含量,增加Cu含量可以提高Al2Cu相数量及析出温度。在210℃以上时效会导致Al2Cu相数量下降。热力学计算确定的最佳固溶温度和时效温度分别在510～520℃和150～200℃之间,热力学计算结果和试验结果相符。     

快速硫化缩合型RTV-2硅橡胶的研制

以107硅橡胶为主要原料,正硅酸酯类为交联剂,有机锡类为催化剂,配制了缩合型双组分室温硫化(RTV-2)硅橡胶.通过共聚配方的设计,使硅橡胶的硫化速度得到显著提高.较佳的配方是:以100份107硅橡胶计,正硅酸乙酯用量为10%,二醋酸二丁基锡用量8%,KH-550的用量0.33%.得到的硅橡胶满足了液态有机污染物泄露事件快速堵漏及公安部门迅速、精确提取立体犯罪痕迹等场合对硅橡胶硫化速度的要求.     

缝洞碳酸盐岩凝析气藏注水替凝析油实验

缝洞型碳酸盐岩油气藏是一种复杂、特殊类型的油气藏,其储层以缝洞和裂缝-孔洞为主,具有双孔隙网络特征及较强的非均质性,渗流规律复杂,实现该类油气藏的高效开发是诸多石油工作者关心并一直致力于研究的问题.借鉴在缝洞型碳酸盐油藏中应用效果较好的“注水替油”方法,建立了缝洞型碳酸盐岩凝析气藏“多级压力注水替凝析油”方法,并以高含凝析油的TZ86井为例,采用露头碳酸盐岩经过人工造缝造洞技术制成全直径缝洞型岩心,在原始地层条件(140.6℃,58 MPa)下进行了多级注水替凝析油物理模拟实验,结果表明采用多级注水替凝析油方式开发缝洞型碳酸盐岩凝析气藏可取得较好效果.