Porous structures printed by fused deposition of granules processed from a novel polyamide/alumina-based system

Alumina ceramic porous structures were shaped by the fused deposition of alumina/polyamide 612 composite granules using an FDM 3D printer with a modified extruder to process granulated powder instead of a filament. The composite granules were prepared via thermally induced phase separation (TIPS). Firstly, in order to determine the proportion of polymer/solvent to be used in the TIPS process, different volume fractions of PA612 in dimethyl sulfoxide (DMSO) were studied (0.01 to 0.20), and the granules obtained were characterized by SEM, DSC, and Raman spectroscopy. Secondly, the addition of different ceramic loadings to the PA612/DMSO solution was studied with the aim of determining the amount to be used for preparing the composite granules by TIPS. In particular, the effect of the alumina content on the morphology and size of the obtained composite granules was studied. In addition, rheological properties (oscillatory and rotational tests) of the feed materials were studied. Finally, the printing conditions, including the nozzle temperature and nozzle diameter, and the extrusion process, were optimized in order to obtain porous structures with good quality. Alumina porous structures were successfully printed, debinded, and sintered. Adequate bonding between layers was achieved, and no defects at interfaces were detected.     

纳米粉及添加剂对压电陶瓷材料性能的影响

采用高能球磨法研磨出PZT-5纳米粉料，添加外购的纳米有机添加剂，按照传统的固相工艺法制备出了压电陶瓷材料，研究分析纳米粉料和纳米有机添加剂对压电陶瓷性能的影响。通过测试分析可以看出，纳米压电粉料与纳米有机添加剂的综合作用，降低了材料的烧结温度、相对介电常数εr,Qm值和以d31，提高了压电应变常数d333，从而压电电压常数g33、gh、dh成倍提高，这些对制作宽带、高灵敏度的换能器是很有好处的。     

湿法磷酸过滤设备和管道结垢原因分析及控制研究

分析湿法磷酸过滤设备与管道结垢的主要原因是氟硅酸钾、钠盐因磷酸液相温度下降而沉积下来。提出采用添加剂,抑制或提前析出氟硅酸钾、钠盐,同时进行了5种添加剂的实验室研究:均有较好的阻垢效果,但最终选择添加剂E(氟硅酸),阻垢率可达70%以上,添加量以0.5g/100g磷矿为宜。     

抗静电剂的应用

本文介绍了抗静电剂在塑料中的应用方法以及各自的特点，并就工业中常用抗静电剂在各类树脂中的应用性能进行评价。     

PVC助剂的新进展

介绍了近年来聚氯乙烯助剂的研制、开发的现状和趋势。     

添加剂对合成堇青石的影响

本文研究了锆英砂、碳酸钡、硅线石、氟化钙四种添加剂及其含量对合成堇青石晶相组成的影响。结果表明:四种添加剂的加入均提高了堇青石的含量,且加入量都有一最佳值,分别为锆英砂2wt%、碳酸钡3wt%、硅线石2wt%、氟化钙2wt%。     

Effect of solution properties on nanofibrous structure of electrospun poly(lactic‐co‐glycolic acid)

Electrospinning of poly(lactic‐co‐glycolic acid) (PLGA) in chloroform or 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was investigated, focusing on its solution parameters, to develop nonwoven biodegradable nanofibrous structures for tissue engineering. PLGA nanofibers were obtained by electrospinning of 15 wt % PLGA solution and the resulting average fiber diameters were varied with the range of 270–760 nm, depending on solution property. When small amounts of benzyl triethylammonium chloride (BTEAC) was added to the PLGA/chloroform solution, the average diameter was decreased from 760 to 450 nm and the fibers were densely amounted in a straight shape. In addition, the average fiber diameter (270 nm) of nanofibers electrospun from polar HFIP solvent was much smaller than that (760 nm) of nanofibers electrospun from nonpolar chloroform solvent. Therefore, it could be concluded that conductivity or dielectric constant of the PLGA solution was a major parameter affecting the morphology and diameter of the electrospun PLGA fibers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1214–1221, 2006     

印制线路板微孔镀铜研究现状

印制线路板微孔金属化的关键在于在高厚径比的微孔中形成无空洞、无接缝、均匀的铜沉积层.综述了目前微孔填充技术的发展现状,对电镀过程中采用的电流密度、搅拌因素和电流波形等进行了探讨,重点讨论了添加剂对填孔效果的影响及其作用机理.     

第十九届中国国际塑料橡胶工业展览会与第八届亚太国际橡塑工业展览会特别报道（1）

介绍了第十九届中国国际塑料橡胶工业展览会(Chinaplas2005)与第八届亚太国际橡塑工业展览会(APPlas2005)展出的树脂、助剂等的新产品、新技术等。     

Galvanostatic and microscopic studies of nodulation during copper electrolysis

The galvanostatic technique on a laboratory scale has been shown to be a useful tool in detecting the presence of nodules on the cathode during copper electrodeposition by using the value of the starting electrolytic potential and by the presence of a cathodic polarization peak on the potential–time curve. Studying the morphology of the deposit with a scanning electron microscope at various magnifications confirmed the galvanostatic results. It is postulated that inappropriate concentrations and/or ratios of the additives (thiourea, gelatin and chloride ions) are associated with a certain current density that generates intergranular microcracks due to adsorption of the additives and leads to the formation of nodules at the macroscale.