Type II fuzzy set-based data analytics to explore amino acid associations in protein sequences of Swine Influenza Virus

The veracity present in molecular data available in biological databases possesses new challenges for data analytics. The analysis of molecular data of various diseases can provide vital information for developing better understanding of the molecular mechanism of a disease. In this paper, an attempt has been made to propose a model that addresses the issue of veracity in data analytics for amino acid association patterns in protein sequences of Swine Influenza Virus. The veracity is caused by intra-sequential and inter-sequential biases present in the sequences due to varying degrees of relationships among amino acids. A complete dataset of 63,682 protein sequences is downloaded from NCBI and is refined. The refined dataset consists of 26,594 sequences which are employed in the present study. The type I fuzzy set is employed to explore amino acid association patterns in the dataset. The type I fuzzy support is refined to partially remove the inter-sequential biases causing veracity in data. The remaining inter-sequential biases present in refined fuzzy support are evaluated and eliminated using type II fuzzy set. Hence, it is concluded that a combination of type II fuzzy & refined fuzzy approach is the optimal approach for extracting a better picture of amino acid association patterns in the molecular dataset.     

The stress intensity factors for a short crack partially penetrating an inclusion of arbitrary shape

Some approximate solutions for predicting the stress intensity factor of a short crack penetrating an inclusion of arbitrary shape have been developed under mode I and mode II loading conditions. The derivation of the fundamental formula is based on the transformation toughening theory. The transformation strains in the inclusion are induced by the crack-tip field and remotely applied stresses, and approximately evaluated by the Eshelby equivalent inclusion theory. As validated by detailed finite element (FE) analyses, the developed solutions have good accuracy for different inclusion shape and for a wide range of modulus ratio between inclusion and matrix material.     

Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

Threshold and growth mechanism of fatigue cracks under mode II and III loadings

ABSTRACT The fatigue crack growth behaviour of 0.47% carbon steel was studied under mode II and III loadings. Mode II fatigue crack growth tests were carried out using specially designed double cantilever (DC) type specimens in order to measure the mode II threshold stress intensity factor range, ΔK_IIth. The relationship ΔK_IIth > ΔK_Ith caused crack branching from mode II to I after a crack reached the mode II threshold. Torsion fatigue tests on circumferentially cracked specimens were carried out to study the mechanisms of both mode III crack growth and of the formation of the factory‐roof crack surface morphology. A change in microstructure occurred at a crack tip during crack growth in both mode II and mode III shear cracks. It is presumed that the crack growth mechanisms in mode II and in mode III are essentially the same. Detailed fractographic investigation showed that factory‐roofs were formed by crack branching into mode I. Crack branching started from small semi‐elliptical cracks nucleated by shear at the tip of the original circumferential crack.     

Finite element analysis of a center crack specimen warm pre-stressed under different modes of loading

Load bearing capacity of cracked specimens can be improved following pre-loading procedures like warm pre-stressing (WPS). In this paper, the effects of modes I and II pre-loading on fracture load of a central angled crack specimen are studied by finite element analysis. The specimen is reloaded either in mode I or in mode II. To predict the fracture load of cracked specimen after pre-loading, the maximum tensile stress (MTS) and maximum shear stress (MSS) criteria are used. It is shown that mode II fracture load is independent of pre-loading but the mode I fracture load is highly improved after warm pre-stressing. The mode mixity of the specimen is also changed when the pre-loading and reloading modes are not identical. An increase in the fracture load of the specimen following pre-loading may be due to change of failure mode as predicted by finite element analysis in this work.     

The influence of various reaction parameters on the performance of (α‐diimine)nickel(II) catalysts in ethylene oligomerization reactions

Modified (α‐diimine)nickel(II) catalysts are suitable for ethylene oligomerization reactions. Due to the mechanism (“chain running”), the formation of double‐bond isomers and branched olefins can be observed. The obtained oligomer mixtures show a Schulz–Flory distribution. Increasing ethylene pressure favors the selectivity of α‐olefin formation. The same effect can be observed when Lewis bases like thiophene or furane are added to the oligomerization reaction mixture. These results can be related to an interaction of the additives with the catalytic active species during the oligomerization process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1356–1361, 2003     

Copper(II) removal from aqueous solutions by fly ash

The removal of Cu(II) by adsorption on fly ash has been found to be concentration, pH and temperature dependent. The kinetics of adsorption indicates the process to be diffusion controlled. The Langmuir constants have been calculated at different temperatures, and the adsorption has been found to be endothermic (ΔH = 15.652 kcal mol^?1). The maximum removal is observed at pH 8.0, and variation in adsorption with pH has been explained on the basis of surface ionisation and complexation.     

Implementing Information Systems: Some Practical Advice and a Richer Model

Recent research suggests that implementing information systems presents considerable difficulties and that many implementations are total or partial failures. This paper argues that what both practitioners and students require are richer and more acceptable models of information systems implementation. Accordingly, case study data concerning the introduction of manufacturing resource planning (MRP II) are used to illustrate five patterns of behaviour (rites) which capture important social actions; and four components of changing psychological orientation. It is argued that appreciation of the rites and psychological developments identified here will support effective change programmes. Guidelines based on our model are provided for practitioners.     

Thermochemical behaviour of Ru(II) complex-SiO2 microcomposites

The results from DSC and thermogravimetric analysis of gels produced from a mixture of tetraethoxysilane (TEOS) and octyltriethoxysilane (OtEOS) both with and without immobilized Ru(II) tris(4,7-diphenyl-1,10-phenanthroline) dichloride as well as DSC and TG data for films deposited by deep-or spin-coating from the same gels, are reported. The initial products are characterized by elemental analysis, IR, solid state NMR and mass spectroscopy. Elemental analysis and IR spectroscopy are applied for identification of some of the intermediates obtained after heating at different temperatures. The final products are characterized by X-ray diffractometry. A hypothesis for the thermodecomposition processes taking place is proposed. The results reported contribute to elucidation of the properties as well as the temperature intervals in which the studied microcomposites could be used as sensing components of oxygen sensors.