低品位氧化锌粉矿制粒及碱性浸出

小于2 mm的氧化锌矿(含锌5.17%)与5%的水泥混合,制粒并固化,所得颗粒直径5~8 mm。固化3天、10天、45天的颗粒用碱性溶液浸出,最大浸出率分别为92.2%、87.3%、72.9%。减少固化时间能够缩短反应时间、增加颗粒中锌的溶解以及减少浸出剂中初始锌浓度的影响。实验表明颗粒最少需固化3天。动力学研究表明浸出过程受浸出剂通过脉石层的扩散控制,表观速率常数分别为3.51×10-2d-1、8.09×10-3d-1和4.74×10-3d-1。     

Atomic layer deposition of thin films of ZnSe—structural and optical characterization

Thin films of sphalerite-type ZnSe were grown by atomic layer deposition (ALD) from elemental Zn and Se precursors. These films, grown on various substrates, show bright blue ‘edge’ emission accompanied by donor-acceptor pair emissions in the blue, green and red spectral regions. Red, green and blue emissions mixed together give a white color, with a color temperature between 2400 and 4500 K depending on a layer thickness and temperature. ZnSe grown by ALD is in consequence a promising material for the fabrication of semiconductor-based white light emitting thin film electroluminescence displays.     

ZnCl2-assisted Synthesis of ZnSe Polycrystal

A chemical-assisted element direct-reaction method is developed to synthesize ZnSe compound semiconductor material at a relatively low temperature (～1000 C). ZnSe polycrystal was obtained in the closed-tube systems with Zn-Se, Zn-Se-Zn(NH3)2Cl2, Zn-Se-NH4Cl and Zn-Se-ZnCl2. The as-synthesized samples were tested by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and analyzed by thermodynamic numerical method. The results demonstrate that the synthesis efficiency is higher than 99.96% for Zn-Se-ZnCl2 system at around 1000 C for 3 weeks. It also exhibits that not only temperature, but also low apparent ratio of volume and surface area of the source materials and higher ZnCl2 content are required to achieve high synthesis efficiency. A SeCl transporting reaction synthesis process is proposed based on the thermodynamic analysis.     

锌基/(C、Si)复合材料的界面结合特征

锌基 /( C、Si)复合材料由石墨和硅粉在 60 0～ 70 0℃加入锌基合金熔体获得。结果表明 :C、Si颗粒可加入锌基合金且分布均匀。热力学计算得出 ,C、Si与锌基合金基体不发生界面反应 ,为机械结合。     

Sensitivity to zinc of Mediterranean woody species important for restoration

Heavy metals have increased in natural woodlands and shrublands over the last several decades as a consequence of anthropogenic activities. However, our knowledge of the effects of these elements on woody species is scarce. In this study, we examined the responses of six Mediterranean woody species to increasing levels of zinc in hydroponic culture and discussed the possible implications for the restoration of contaminated sites. The species used, Pinus pinea L., Pinus pinaster Ait., Pinus halepensis Mill., Tetraclinis articulata (Vahl) Mast., Rhamnus alaternus L. and Quercus suber L. represent a climatic gradient from dry sub-humid to semi-arid conditions. Zinc concentrations in shoots ranged from 53 μg g^− 1 in Q. suber to 382 μg g^− 1 in T. articulata and were well below the levels found in roots. Zinc inhibited root elongation and root biomass and changed the root length distribution per diameter class, but the magnitude of the effects was species-specific. Only P. halepensis and Q. suber showed toxicity symptoms in aboveground parts. Species more characteristic from xeric environments (T. articulata, R. alaternus and P. halepensis) were more sensitive to zinc than species from mesic environments (Q. suber, P. pinaster and P. pinea). According to the Zn responses and bioaccumulation, Q. suber P. pinea and P. halepensis are the best candidates for field trials to test the value of woody species to restore contaminated sites. None of the species tested seemed suitable for phytoremediation.     

Going from green to white color electroluminescence through a nanoscale complex of Zinc (II)

In this paper, we report application of four novel Nano Zinc (II) complexes as the emitter dyes in organic light emitting diodes (OLEDs). The Nano Zinc (II) complexes emission, particularly its absorption, fluorescence spectra and quantum yield, tuned by varying sizes which affects environments of the Zinc (II) ion. OLED Devices with Nano Zinc (II) complexes were fabricated, giving rise to devices with peak emission ranging from 498 to 541 nm. Here, we have successfully employed sonoelectrochemical method for fabricating white OLEDs. The white emission ascribed to the exciton emission in Nano Zinc (II) complex emitter and from exciplex formation at the interface of PVK/Nano Zinc (II) complex. The experimental results demonstrate that this approach is ideal for color tuning of single and multilayer conducting semiconducting thin films used in the fabrication of organic electronic devices such as OLEDs.     

A novel self-assembly with two acetohydrazide zinc porphyrins coordination polymer for supramolecular solar cells

Two new acetohydrazide zinc porphyrin with different donor units based Mn (Ⅱ) ion coordination polymers (CPsx, x=1,2) have been designed, synthesized, and well-characterized. Two coordination polymers and anchor porphyrin (ZnPA) self-assembly by metal-ligand axial coordination to modify the nano-structured TiO₂ electrode surface has been investigated in photoelectrochemical device. Our results reveal that the self-assemblies devices show significantly improved photocurrent conversion efficiency. Particularly, CPs1 based solar cell showed higher short circuit current density and conversion efficiency. Their optical performance, electrochemical impedance spectroscopy and transient photovoltage decay were also investigated to further understand the photoelectrochemical results. In addition, the assembled modes of the assemblies immobilized on TiO₂ electrode surfaces were also verified by transmission electron microscopy (TEM), theory calculations and energy dispersive X-ray spectroscopy (EDX).     

Zinc--嵌入式操作系统Vxworks下的用户图形界面开发工具

本文从Zinc的概念、结构和运行机理等方面为使用Vxworks操作系统的用户介绍了一种新的界面开发工具,这种工具不但拥有面向对象的特点,而且拥有事件驱动的体制.它类似于Windows下面的可视化开发工具,使得用户开发工程得心应手.     

Electrically Addressable Hybrid Architectures of Zinc Oxide Nanowires Grown on Aligned Carbon Nanotubes

The fabrication and characterization of hybrid architectures of ZnO nanowires (ZNWs) grown on organized carbon nanotubes (CNTs), by a two‐step chemical vapor deposition (CVD) process involving CNT growth from a hydrocarbon source followed by ZNW growth using a Zn metal source, is reported. The ZNWs grow uniformly and radially from individual CNTs and CNT bundles, and the aligned morphology of the CNTs is not disturbed by the ZNW growth process. The nucleation and growth of ZnO crystals on CNTs are analyzed in relation to the classical vapor–solid mechanism. Importantly, the CNTs make uniform and distributed electrical contact to the ZNWs, with up to a 1000‐fold yield advantage over conventional ZNW growth on a flat substrate. Hybrid ZNW/CNT sheets are fabricated by scalable CVD, rolling, and printing methods; and their electrical properties, which are governed by transport through the anisotropic CNT network, are characterized. Functional interaction between the ZNWs and CNTs is demonstrated by photoconductive behavior and photocurrent generation of the hybrid material under UV illumination. There is significant future opportunity to extend these processing methods to fabricate other functional oxides on CNTs, and to build devices that harness the attractive properties of ZNWs and CNTs with high volumetric efficiency over large areas.     

Characterization of ZnS grown by metal-organic chemical vapour deposition on GaAs(100) using t-butyl mercaptan and dimethylzinc

ZnS has been grown on GaAs(100) substrates by atmospheric pressure metal–organic chemical vapour deposition (MOCVD) using dimethylzinc (DMZn) and t-butyl mercaptan (t-BuSH). The effects of the reactant gas phase molar ratio and the growth temperature on the characteristics of the material grown have been investigated. The structural quality of the layer is demonstrated by X-ray rocking curve half-widths of less than 300 arcsec for the epilayers. There is little significant pre-reaction and the layers are of excellent surface morphology and layer uniformity.