A facile and efficient method for preparation of chiral supported poly(styrene–divinylbenzene) copolymers

A new and efficient method for preparation of optically active poly(styrene–divinylbenzene) copolymers (PS-DVB) is presented here. This is carried out by Friedel–Crafts acylation reaction of chiral N-phthaloyl -leucine acid chloride with PS-DVB beads in the presence of aluminum chloride as Lewis acid catalyst and 1,2-dichloroethane as the solvent at ambient temperature. Reagents’ amounts and reaction conditions are mentioned and four samples with different amounts of functionality have been prepared. Final products were characterized by FT-IR and elemental analysis. The results obtained confirm that the above modification in preparation of chiral supported PS-DVB has been achieved well and in moderate yield.     

1,4,5,8-四氮杂氢化萘（2,3,-6,7）并双呋咱衍生物的合成

由1，4，5，8—四氮杂氢化萘(2，3，-6，7)并双呋咱经羟甲基化、酰化、硝化和叠氮化等反应合成出一系列热稳定的呋咱含能衍生物，并以^1HNMR、IR、MS、元素分析鉴定了其结构。     

乙氧苯酯的合成工艺改进

以对氨基水杨酸为原料，经酯化、酰化和烃化反应得乙氧苯酯，总收率为８７．４％。讨论了投料比、反应温度和反应时间对收率的影响，并改进了合成工艺。     

Preparation of water‐repellent silks by a reaction with octadecenylsuccinic anhydride

Silk fibers and membranes were acylated with octadecenylsuccinic anhydride (ODSA) at 75°C for different times. Swelling [N,N‐dimethylformamide (DMF) and dimethyl sulfoxide (DMSO)] and nonswelling (xylene) solvent media were used for the reaction. Silk membranes that reacted in DMF or DMSO displayed faster reaction kinetics and attained higher weight‐gain values than fibers. The effect of the solvent on the reaction yield was in the following order: DMSO > DMF ? xylene. The Fourier transform infrared spectra of acylated silk samples showed the characteristic absorption bands of the anhydride at 2990, 2852, 1780–1700, and 1170 cm^?1. The intensity of the latter band, which increased linearly with the weight gain, was used as a marker for evaluating the reaction kinetics of the samples acylated in the nonswelling medium. The moisture regain and water retention of silk fibers acylated with ODSA decreased significantly, regardless of the solvent system used. Accordingly, the water repellency increased. Acylation induced an increase in the thermal stability of the silk fibers and membranes. Fine particles adhering to the surfaces of the silk fibers acylated in xylene were detected by scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 324–332, 2003     

有机碱对莰烯直接乙酰化的影响

研究了在含氮有机碱存在下的莰烯直接乙酰化反应，结果表明，在反应中加入与莰烯等摩尔的六氢吡啶，有利于莰烯乙酰化反应，在反应液中的酰化产物ω－乙酰基莰烯含量最高达到56％，大大超过异构化产物乙酸异冰片酯。     

HIV病毒抑制剂中间体5-戊基间苯二酚的合成

以3,5-二甲氧基苯甲酸为起始原料,与LiH在室温下反应5h生成苯甲酸盐,生成的盐再与正丁基锂进行酰化反应得到3,5-二甲氧基苯戊酮,进而在210℃以下进行乌尔夫-黄鸣龙反应将酮还原,生成3,5-二甲氧基戊苯,所得产物与吡啶盐酸盐熔融,于200℃回流2h,脱甲基制得5-戊基间苯二酚,总收率达60.9%,纯度≥98%。     

红色基RL的合成工艺改进

详细研究了红色基RL(对硝基邻甲苯胺,简称RL)的合成工艺,对传统的合成工艺进行了改进,通过用乙酐作氨基保护试剂,混酸硝化,酸性水解等分步操作合成了RL。与传统方法相比,采用乙酐作氨基保护试剂,高温酰化,减少了乙酐用量;用混酸硝化,增强了硝化能力,提高了收率。分别研究了乙酐用量、反应时间、反应温度以及混酸配比对RL收率及熔点的影响规律,得到了反应的较佳条件。采用乙酐酰化分步合成法,RL总收率为56·4%(以邻甲苯胺计),氨基值为91·26%。     

4′-乙酰基缩氨硫脲基苯并-15-冠-5的合成

报道了在多聚磷酸 (PPA )中将冠醚酰化的方法 ,合成了 4′-乙酰基苯并 - 15 -冠 - 5 ,以此为原料 ,在酸性条件下与氨基硫脲作用 ,合成了 4′-乙酰基缩氨硫脲基苯并 - 15 -冠 - 5。经由 IR、MS和元素分析对合成的两种新物质的结构进行了表征     

磺酰胺类除草剂阔草清的合成研究

以5-氨基-3-巯基-1，2，4-三唑和2，6-二氟苯胺为主要原料，经苄基化、环合、酰化、胺解4步反应合成阔草清，总收率46．5％。该方法可以降低成本，提高反应速度，简化分离步骤，降低能耗和减少污染，是一种较清洁的生产工艺，适合工业化生产。     

Synthesis of novel functional polyolefin containing carboxylic acid via Friedel-Crafts acylation reaction

The strong polar group, carboxylic acid, has triumphantly been introduced into ethylene and allylbenzene copolymers without obvious degradation or crosslinking via Friedel-Crafts (F-C) acylation reaction with glutaric anhydride (GA), succinic anhydride (SA) and phthalic anhydride (PA) in the presence of anhydrous aluminum chloride in carbon disulfide. Some important reaction parameters were examined in order to optimize the acylation process. In the optimum reaction conditions, almost all of the phenyls can be acylated with any anhydride. The microstructure of acylated copolymer was characterized by FT-IR, ¹H NMR and ¹H-¹H COSY. All the peaks of acylated copolymers can be accurately attributed, which indicates that all the acylation reactions occur only at the para-positions of the substituent of the aromatic rings. The thermal behavior was studied by differential scanning calorimetry (DSC), showing that the melting temperatures (T_ms) of acylated copolymers with GA firstly decrease slowly and then increase significantly with the increase of the amount of carboxyl acid groups.