BAMO-THF复合推进剂能量特性计算与分析

利用最小自由能法研究了以3,3-二叠氮甲基氧丁环(BAMO)与四氢呋喃(THF)共聚醚(PBT)为粘结剂,高氯酸铵(AP)、黑索今(RDX)、铝粉(Al)、二硝酰胺铵(ADN)为固体填料,不同增塑剂条件下推进剂比冲变化规律.理论计算表明: 以2,2-二硝基丙醇缩甲醛与2,2-二硝基丙醇缩乙醛等质量比混合物(A3)、硝化甘油与二乙二醇二硝酸酯等质量比混合物(NG/DEGDN)作增塑剂时,推进剂比冲随RDX含量变化呈抛物线形,固体填料存在最佳添加比; NG/DEGDN增塑体系推进剂比冲高于A3体系.15% ADN取代AP时,由于燃烧产物平均相对分子质量降低,推进剂比冲显著提高.     

APT废水中氨氮的测定

APT废水中氨氮主要以铵盐的形式存在,采用蒸馏滴定法测定其氨氮的总量,方法以20 g/L硼酸溶液为吸收液,吸收蒸馏出的NH3,用甲基红--亚甲基蓝为指示剂,硫酸标准溶液滴定.方法的标准平均偏差为1.9%,回收率为99%～105%.     

Polyaniline sensitized Pt@TiO2 for visible-light-driven H2 generation

Polyaniline is a typical conducting polymer with high migration electron rate, good stability, eco-friendly properties, and high absorption coefficients for visible light. In the present study, polyaniline decorated Pt@TiO₂ for visible light-driven H₂ generation is reported for the first time. The above-mentioned nanocomposite is prepared through a simple oxidative-polymerization and characterized by infrared spectroscopy, transmission electron microscopy, X–ray diffraction, thermogravimetric analysis, and ultraviolet–visible diffuse reflectance spectra. Polyaniline modification improves the absorption of the nanocomposite in visible light region via a photosensitization effect similar to dye–sensitization but does not influence the crystal structure and size of Pt@TiO₂. The polyaniline modified Pt@TiO₂ exhibits a remarkable visible light activity (61.8 μmol h⁻¹ g⁻¹) and good stability for H₂ generation (with an average apparent quantum yield of 10.1%) with thioglycolic acid as an electron donor. This work provides new insights into using conducting polymers, including polyaniline, as a sensitizer to modify Pt@TiO₂ for visible-light hydrogen generation.     

工业硝酸铵添加剂对乳胶基质的影响

为了改善工业硝酸铵的吸湿结块性能,通常会加入添加剂(有机包覆剂或无机改性剂),而工业硝酸铵作为乳化炸药的主要原料,其添加剂对乳化炸药的制备和性能会产生影响。因此,分别对采用有机包覆剂蜡的泰国产工业硝酸铵和采用无机改性剂的俄罗斯产工业硝酸铵,开展了制备现场散装乳胶基质的工业试验。结果表明:两类工业硝酸铵均可作为乳化炸药原材料使用,但有机包覆剂会沉入水相罐底部或粘附在输送管道内壁,对水相和乳胶基质制备造成不利影响,因此需要在水相制备环节分离去除包覆剂蜡;硝酸镁、硝酸钙等无机改性剂对乳胶基质制备无影响,但生产的乳胶基质稳定性较差,通过调整乳化剂的种类和配比以及乳化器的转速可得到一定改进。     

常压塔顶系统铵盐结晶诊断与治理方案

随着原油的劣质化,油中的有机氯含量增加,而电脱盐不能脱除这些有机氯,常压塔顶低温部位会有铵盐析出,对设备腐蚀和馏分切割都带来负面影响,甚至会导致装置非计划停车。在分析铵盐结晶问题和调研防治技术的基础上,采用注入分散剂的技术方案进行处理,取得很好效果。     

硫酸亚铁铵容量法测定高锰酸钾含量

建立了硫酸亚铁铵容量法测定氧化物处理槽液中高锰酸钾含量的分析方法,进行了指示剂选择、精密度和加标回收率等条件实验。实验结果表明,相对标准偏差均小1.0%(n=7),加标回收率为99.49%~100.61%。此方法的精密度好、准确度高。     

硫脲基松香咪唑啉季铵盐 的合成、性能及缓蚀机理

以松香、二乙烯三胺、3-氯-2-羟基丙烷磺酸钠和硫脲为主剂合成了硫脲基松香咪唑啉季铵盐,对其结构进行了红外和核磁(~(13)CNMR)表征。通过静态失重法和电化学方法考察了硫脲基松香咪唑啉季铵盐在酸性介质中的缓蚀性能,结合成膜理论以及缓蚀剂的分子结构,对自制缓蚀剂的缓蚀机理做出了解释。结果表明:303 K下,在质量分数为15%的盐酸介质中加入占盐酸质量0.4%的硫脲基松香咪唑啉季铵盐,其缓蚀率可达90.81%;自制缓蚀剂吸附在碳钢表面形成吸附膜,从而起到缓蚀作用。     

硝基复合肥生产系统优化改造

对硝酸-硫酸混酸法硝酸磷肥生产装置进行改造,添加硫酸钾生产三元硝基复合肥。介绍三元硝基复合肥的生产工艺流程、装置特点。生产的三元复合肥料产品水溶率高,深受用户好评,提高了公司市场竞争力。     

新型油田污水除油剂的制备及性能研究

采用共沉淀法合成出Fe_3O_4/氧化石墨烯(GO)纳米复合材料,然后通过静电作用将聚二烯丙基二甲基氯化铵(PDDA)修饰在Fe_3O_4/GO表面,制备出一种新型除油剂PDDA/Fe3O4/GO,并考察了Fe3O4与GO配比、p H、温度、反应时间和除油剂投加量等因素对除油效果的影响。实验结果表明:PDDA/Fe_3O_4/GO不仅除油性能良好,而且除油速度快;在室温20℃、反应时间10 min、投加质量浓度为300 mg/L的条件下,可将油田污水中的油降至50 mg/L以下。该除油剂具有制备方法简单、除油速度快、易于操作、可重复利用等特点,为油田污水处理提供了一种新的研究思路。     

Column leaching process of rare earth and aluminum from weathered crust elution-deposited rare earth ore with ammonium salts

In order to better understand the leaching process of rare earth (RE) and aluminum (Al) from the weathered crust elution-deposited RE ore, the mass transfer of RE and Al in column leaching was investigated using the chromatographic plate theory. The results show that a higher initial ammonium concentration in a certain range can enhance the mass transfer process. pH of leaching agent in the range of 2 to 8 almost has no effect on the mass transfer efficiency of RE, but plays a positive role in the mass transfer efficiency of Al under strong acidic condition (pH<4). There is an optimum flow rate that makes the highest mass transfer efficiency. The optimum leaching condition of RE is the leaching agent pH of 4–8, ammonium concentration of 0.4 mol/L and flow rate of 0.5 mL/min. The mass transfer efficiencies of RE and Al both follow the order: (NH₄)₂SO₄<NH₄Cl<NH₄NO₃, implying the complexing ability of anion.