苯胺及其衍生物的气相色谱分析方法研究

建立了气相色谱法对苯胺及其五种衍生物进行分离与同时测定的方法。最佳色谱分离条件如下:HP-5MS空心毛细管柱(30 m×0.32 mm×0.25μm);程序升温方式:初始温度70℃,以20℃/min升至150℃,保持1 min;以氮气为载气,流速为5.0 m L/min;尾吹气(氮气)流速为30 m L/min;氢气流速为35 m L/min;空气流速为400 m L/min;不分流进样,进样量为1μL;进样口温度为260℃,检测器温度为320℃。在最佳实验条件下,六种组分在4 min内全部出峰,达到较好的分离,实现对组分的分离与同时检测。     

氢供体组与辣根过氧化酶活性光谱研究

对邻苯二酚-苯胺和苯酚-氨基安替吡啉构成的两组测定HRP酶活性的体系进行了研究和比较。紫外可见光光谱和高效液相色谱分析表明,在HRP催化过程中,邻苯二酚-苯胺氢供体对会生成为一种粉红色产物,该产物最大吸收波长在510咖,可用于HRP的活性测量。且与常规使用的苯酚-氨基安替吡啉氢供体对的情况相比,具有更高的灵敏度、更低的检测限值和很好的重复性,在对HRP分别进行20次酶活测量,所得相对标准偏差仅为2．9％。使用邻苯二酚-苯胺氢供体对的方法可计算得到酶动力学参数Km（12．5mM）和Vmax（12．2mMmin^-1mg^-1）。     

沸石催化苯胺苯核烷基化反应的研究

用高压反应釜结合气相色谱、气相色谱－质谱联用、气相色谱－红外联用等分析技术探讨了环己烯和苯胺在不同酸度Ｙ型沸石上的烷基化反应。结果表明，于选定的试验条件下，可选择性地生成邻位烷基化产物，其烷基化活性和选择性与催化剂的质子酸度有关。     

FeCl_3/PVP胶体催化水合肼还原硝基苯

以聚乙烯吡咯烷酮(PVP)为保护剂,采用水热合成法制备了FeCl3/PVP胶体催化剂,通过XRD和TEM方法对催化剂的形貌与结构进行了表征;考察了催化剂的制备条件(水热时间、PVP与FeCl3的摩尔比)和反应条件(反应温度、水合肼用量和催化剂用量)对还原反应的影响。实验结果表明,在PVP与FeCl3摩尔比1∶40、100℃下水热2h制得的胶体稳定性好、分散度高,其胶粒呈70～90nm的棒状结构。该胶体催化剂在催化水合肼还原硝基苯的反应中表现出很高的催化活性,在反应温度80℃、反应时间80min、硝基苯用量4.89mmol、无水乙醇用量5mL、FeCl3/PVP胶体催化剂用量2.0mL(nFe=0.150 0mmol)、n(水合肼)∶n(硝基苯)=2.5的条件下,苯胺收率可达100%。     

国内外苯胺生产现状与市场分析

阐述了国内外苯胺合成技术的进展情况、消费现状与发展预测。认为随着未来MD I的快速发展,苯胺消费结构的调整进度将加快。分析了国内外苯胺市场概况,对我国苯胺工业的发展提出了一些建议。     

硒催化水合肼还原芳香族硝基化合物制芳胺

在温和条件下,研究了硒对水合肼还原芳香族硝基化合物制芳胺的催化性能。邻位或对位有取代基的芳香族硝基化合物被还原为相应芳胺的收率较低;硝基苯或间位有取代基的芳香族硝基化合物被还原为相应芳胺的收率较高。以硝基苯为底物,考察了溶剂、硒粉用量和NaOH用量等因素对反应的影响。得到的适宜条件为:以5 mL乙醇和1 mL水为溶剂,2 mmol芳香族硝基化合物,4 mmol水合肼,O.04 g NaOH和0.02 g硒粉,反应温度为75℃,反应时间为2～5 h,硝基苯或间位有取代基的芳香族硝基化合物被还原为芳胺的收率为87%～99%。催化剂重复使用4次活性没有降低。     

260～285nm波段苯胺的共振增强多光子电离研究

在自行研制的具有恒温加热进样系统的激光质谱仪上获得了260～285nm波段气相苯胺分子的共振增强多光子电离／飞行时间质谱（REMPI-TOFMS）。结合在266nm激发波长下得到的C6H7N^＋、C5H6＋、C4H3^＋、C3H3^＋、C2H4^＋及H2CN^＋离子的光强指数及不同激光能量下备离子信号强度的分支比,对分子离子及主要碎片离子的生成机理进行了探讨：在此波段范围内,苯胺分子首先吸收一个光子跃迁至。B2第一激发态,处于激发态的苯胺分子再吸收一个光子电离生成分子离子C6H7N＋,分子离子进一步吸收光子解离为C5H6^＋、H2CN^＋、C6H^＋,碎片离子C6H5^＋继续吸收光子解离产生C4H3^＋、C3H3^＋、C2H4^＋,并给出了可能的解离通道。     

Synthesis and air separation of soluble terpolymers from Aniline,Toluidine, and Xylidine

A series of terpolymers were synthesized by oxidative polymerization of aniline, o-toluidine, and 2,3-xylidine with three monomer ratios using ammonium persulfate as an oxidant in two acidic media. The yield and intrinsic viscosity of the terpolymers were studied by changing the polymerization temperature and medium. The resulting terpolymers were characterized by ¹H–NMR, wide-angle X-ray diffraction, differential scanning calorimetry, thermogravimetry, and constant pressure-variable volume methods. The results showed that the terpolymers are amorphous and exhibit enhanced solubility, high thermostability, and high char yield, greater than 35 wt % at 900°C in nitrogen. A blend membrane of the terpolymer with ethyl cellulose shows good air-separation ability. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 790–798, 2001     

The Effect of Nanosized Layered Materials on the Structure-Property Relationship of Poly(aniline)s: An FTIR Kinetic Study

Aniline (ANI) was chemically polymerized in the presence of two different nanosized layered materials, zirconylphosphate (ZP) and molyptic acid (MA) under different experimental conditions with nitrogen purging at 45°C. The effect of nanosized layered materials on the rate of polymerization (R_p) and Fourier transform infra red-relative intensities (FTIR-RI) of benzenoid and quinonoid forms of poly(aniline) (PANI) were tested. The thermal stability and electrical conductivity values were boosted with the help of nanosized materials. High resolution transmission electron microscope (HRTEM) determined the size of nano material and its uniform distribution on the PANI matrix. For the sake of comparison, o-toluidine (OT) was polymerized under the same experimental conditions and its structure-property relationship in the presence of nano materials were also tested and critically compared with PANI systems.     

Synthesis and Property of H2La2Ti3O10/CdS Layered Nanocomposite Photocatalyst

H2La2Ti3O10/CdS nanocomposite with er photoactivity was synthesized by a stepwise exchange process from H2La2Ti3O10, which was obtained by H^＋ -exchanging reaction of H2La2Ti3O10 with HCl other than the normally used HNO3. The pillaring process was investigated by XRD, TEM, FT-IR and BET methods. The photocatalytic decomposition of aniline was used as the model system to evaluate the photochemical properties of H2La2Ti3O10/CdS,H2La2Ti3O10 and K2La2Ti3O10. It is found that the photoactivity of layered H2La2Ti3O10 is greatly improved by the intercalation of CdS in the interlayer. In general, the excellent photoactivity of the H2La2Ti3O10/CdS nanocomposite might be attributing to the extremely small particle size of incorporated CdS and good contact between CdS and La2Ti3O10^2- layers. On the other hand, the coupling of two semiconductor particles with different energy gap is useful to achieve effective charge separation. In H2La2Ti3O10/CdS, a photo-generated electron can transfer from CdS to the La2Ti3O10^2- layer, while the holes remain in the CdS particles. This helps to diffuse the electrons and holes before reaching the interface, and the holes and electrons can be effectively captured by the electrolyte in the solution. Simuhaneously, the optimal operating condition of photodecomposition aniline was investigated.