基于YCbCr肤色模型改进算法及区域特征的人脸检测研究

针对当前人脸检测的研究现状与难题,采用改进的YCbCr椭圆聚类肤色模型进行肤色区域提取,根据肤色在YCb’Cr’空间的分布,对于亮度小于80的非肤色像素点会误判为肤色点,则缩小椭圆聚类;对于亮度大于230的肤色像素点会误判为非肤色点,则扩大椭圆聚类,有效避免了在高亮度区域和亮度较低的区域中的肤色点误判问题。接着利用人脸的几何特征,对二值化图中的目标区域进行比例、大小结构的分析,排除不可能的人脸区域,并基于肤色和位置进行区域优化,将处理后的结果作为候选人脸区域输出。     

基于SPOT-5多光谱影像的矿区塌塘水体提取方法研究

针对基于遥感影像的水体提取方法存在水体提取不完整和误提的现象,提出了一种基于SPOT-5多光谱影像的矿区塌塘水体提取方法。在利用波段合成增加一个可用波段的基础上对已有的水体提取方法进行适当的改进,并基于决策树分类器和改进后的方法进行矿区水体的四级提取,保证了水体提取的完整性,同时减少了误提率;最后利用实测数据对水体提取的精度进行了评定。试验结果表明,基于决策树分类器的水体提取方法具有较高的精度,能满足矿区实际应用的需要。     

基于图像处理的片式元件缺陷检测算法

表面缺陷检测是电子元器件生产过程中的关键步骤,通过分析表面缺陷检测的现状问题,结合片式元件图像的自身特征,提出一种基于改进的自适应阈值canny算子的片式元件缺陷检测算法;该算法把片式元件灰度图像进行区域分割,得到不同值域范围内的灰度区域,利用带有敏感度的自适应双阈值canny算子进行边缘检测;算法实现结果表明,该算法能高效地检测并处理不同缺陷类型的片式元件,并且可以达到工业生产的检测速度。     

Nondestructive characterization of the mechanical strength of diffusion bonds. II. Application of a quasi-static spring model

It has been shown that the acoustic response of imperfect interfaces may be described by a quasi-static spring model. In the present paper, experimental data on the geometry of the contacts between two diffusion-bonded blocks have been used to determine the spring stiffness of such interfaces which have been correlated with experimentally determined ultrasonic reflection coefficients. The correlation between the theoretical reflection coefficient and the spring stiffness was found to be in excellent agreement with experimentally-observed values, if the disbonds are of infinitesimally small thickness. For disbonds of finite thickness, the agreement is less satisfactory. Reasons for the discrepancy in the latter case are unknown at the present time.     

The pulse distributed file system

A network of powerful personal computers, linked by a high-speed local area network, is being seen increasingly as an alternative to a traditional centralized time-sharing operating system. The PULSE project is investigating how such a system may be constructed to give the benefits of a self-sufficient personal computer to each user without losing the facilities for communication and sharing of data inherent in centralized systems. In particular, a distributed file system has been built which provides a single global UNIX

1 UNIX is a trademark of Bell Laboratories.

-like hierarchy, with a consistent appearance when accessed from any machine. Replicated copies of files are maintained to improve reliability, increase performance, and enable each machine to run stand-alone, albeit with reduced facilities.     

基于无线网络的制造业物料配送系统的设计*

针对制造业传统物料配送系统存在的缺点,基于业务流程再造的理念,运用无线局域网技术设计了全新的物料配送系统。该系统能够对配送流程进行优化,提高了配送效率,有效地解决了配送不及时所造成的生产速度瓶颈问题。     

不同活化剂对石油焦基活性炭孔结构的影响

以石油焦为原料 ,Na OH,KOH和 Na2 CO3 为活化剂制备活性炭 ,采用氮气吸附考察了不同活化剂对活性炭的比表面积、中孔和微孔孔径分布、孔容积及平均孔径等孔结构的影响 .结果表明 :KOH活化制备的活性炭包含 1 nm的微孔和 4nm的中孔 ,总孔容 0 .648cm3 /g,比表面积大 ;Na OH制备的活性炭以 1 nm的微孔为主 ,占总孔容 ( 0 .1 65 cm3 /g)的 98% ,平均孔径 1 .83nm;Na2 CO3 制备的活性炭以 4nm的中孔为主 ,占总孔容 ( 0 .1 43cm3 /g)的 68.5 % ,平均孔径 3.42 nm,比表面积小 .3种样品的孔径都呈现出多峰分布特征 .KOH和 Na2 CO3 活化制备的活性炭的 N2 吸附脱附曲线属于 型 ,Na OH活化制备的活性炭吸附脱附曲线属于 型 .     

Surface Areas of Nitrated Hydrotalcites

Hydrotalcites in the nitrate form were prepared using microwave irradiation in the hydrotreatment step. The surface area (BET) of nitrated hydrotalcites was evaluated. Solids were characterized by atomic absorption, X-ray diffraction and BET analysis. Thermal pretreatment temperature determined the surface area of the hydrotalcites.     

Carbon Aerogels as Electrode Material in Supercapacitors

Due to their large specific surface area and their high electrical conductivity carbon aerogels are promising materials for electrodes in electrochemical double-layer capacitors (supercapacitor). The carbon aerogels were made via pyrolysis of resorcinol formaldehyde aerogels. The latter were prepared by supercritical and subcritical drying as well. The important findings of our investigation were, that the highest capacities of 46 F/cm³ were measured for samples with a density of about 800 kg/m³ pyrolyzed at 800°C. Also it was shown that RF-gels with molar resorcinol/catalyst ratios 1000 or higher can be dried subcritically without cracking or significant shrinkage. Carbon aerogels derived from these RF-aerogels have a small mesopore surface area, however an especially large micropore area. They provide electrical capacities which are most suitable for their use in supercapacitors.     

如何提高预焙铝电解槽阳极质量

预焙阳极的质量已严重制约铝电解技术的发展，必须予以足够的重视．国外在提高阳极质量方面的有效措施，可以供国内阳极工厂技术改造及科研攻关借鉴．