Development of a fast neutron radiography converter using wavelength-shifting fibers

A fluorescent converter for fast neutron radiography (FNR) comprising a scintillator and hydrogen-rich resin has been developed and applied to electronic imaging. The rate of the reaction between fast neutrons and the converter is increased by thickening the converter, but its opaqueness attenuates emitted light photons before they reach its surface. To improve the luminosity of a fluorescent converter for FNR, a novel type of converter was designed in which wavelength-shifting fibers were adopted to transport radiated light to the observation end face. The performance of the converter was compared with that of a polypropylene-based fluorescent converter in an experiment conducted at the fast-neutron-source reactor YAYOI in the University of Tokyo.     

Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

Inhibition of Undesirable Gas Production in Tofu

Of 100 gas-producing bacterial isolates, 65% were Gram-negative. Bacterial growth and gas production in commercial tofu was accompanied by acidification, and pH decreases as low as 5.2. Coliform bacteria constituted 15% of the total bacterial flora. Sporeformers and yeast counts remained < 10³ CFU/mL. Pasteurization was effective in lowering the bacterial counts, and retarded gas production. The addition of lactic acid (reducing pH to 5.5) or lactic acid bacteria (2 × 10⁷ CFU/g) to tofu helped reduce gas production by about 50%. Addition of both lactic acid and Lactobacillus plantarum stopped gas production in contaminated tofu.     

可变波长光纤光栅滤波器用微驱动器的研制

为了研制可调谐光纤光栅滤波器而采用拉伸装置和光纤光栅一体化的微小器件结构。实现方法是由微细加工技术加工制造一种新的波长可变光纤光栅滤波器用驱动器，该微型驱动器采用电磁式驱动，由上下两层线圈构成，每个线圈有21匝平面线圈，产生约0．2μNm的扭矩，对应光纤光栅的反射波长变化约5nm。它可应用于可谓谐光纤光栅滤波器的驱动。     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。     

Mannitol and oligosaccharides as new criteria for determining cold tolerance in sugarcane varieties

Sugarcane can be very susceptible to damage by freezes. Freeze-deteriorated cane can cause problems in processing and sometimes leads to a factory shut-down. This study was undertaken during the 2000/2001 harvest season to assess the cold tolerance performance of six commercial sugarcane varieties and to establish new and more sensitive criteria to measure cold tolerance. Two varieties CP 70-321 and CP 79-318, with known cold tolerance, were planted in the study as controls. The other varieties included LHo 83-153, LCP 85-384, HoCP 85-845 and HoCP 91-555. Freezing temperatures occurred on 20 December 2000 when the min. field temperature was −4.4 °C, and again on 21 December, 30 December through 5 January 2001, 9–10 January and 20–21 January. The lowest field temperature recorded was −5.6 °C on 4 January. Freezing conditions prevailed for 8–15 h during each freeze incident. Stalks of all varieties were frozen to the ground following the initial freeze, with freeze cracks evident only after the 4 January freeze. For this study, samples were taken on the date of the first freeze, 20 December, and subsequently again at 7, 14, 22 and 30 days after the first freeze. Criteria used to measure overall stalk cold-tolerance included changes in pH, Brix, dextran (ASI-II method), sucrose, glucose, and fructose concentrations. Mannitol, ethanol and the oligosaccharides, palatinose, leucrose, iso-maltotriose and 1-kestose, were simultaneuously measured using IC-IPAD. Marked differences were observed in most criteria for all varieties, particularly 22 and 30 days after the first freeze. Mannitol was strongly correlated (r²=0.84) with dextran, confirming its use as an indicator for cane dextran deterioration. In comparison, ethanol was only weakly correlated (r²=0.55) with dextran and did not always predict cane dextran deterioration. Iso maltotriose was the most sensitive oligosaccharide indicator of freeze deterioration, although both leucrose and palatinose could be used to confirm whether severe dextran formation (>1500 ppm/Brix) has occurred in cane. Isomaltotriose was strongly correlated (r²=0.89) with dextran and pH (r²=−0.83); pH was also a strong indicator of both dextran (r²=−0.85) and mannitol (r²=−0.92) formation. Four of the varieties, CP 79-318, LCP 85-384, HoCP 85-845 and HoCP 91-555, were shown to be susceptible to other sources of microbial and enzymic deterioration as well as dextran deterioration from Leuconostoc bacteria, especially 30 days after the first freeze. This was indicated by increased glucose/fructose ratios, ethanol formation, changes in 1-kestose concentration, and further sucrose losses.     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.     

热分析在PVA纤维预处理中的应用

用差热、热重法对原丝的热性能及由不同预处理方法所引起的PVA纤维的热行为变化进行了研究;并通过模拟脱水条件,用不同升温速率,求出了经不同预处理纤维的脱水反应活化能。结果表明,PVA原丝在230℃有一软化点,三种预处理都不同程度地影响了原丝的热效应变化;纤维在180～340℃主要为脱水反应;原丝及经脱水剂、O_3和O_3综合脱水剂处理的纤维,其脱水反应的表观活化能分别为:164.3kJ/mol,92.9kJ/mol,130.5kJ/mol和117.6kJ/mol。     

Delta4型外流式压力筛的长纤维浆筛选实践

介绍了Delta4型压力筛生产全漂白硫酸盐法马尾松浆的运行情况，对存在的问题进行分析探讨，并对比了技改重新选型后的生产情况。