一种改进的快速相位相关算法在FBG测温系统中的应用

分析了LFPC算法、FPC算法、CCA算法对光纤布拉格光栅原始信号寻峰,比较了误差均值和标准偏差。在改变波长分辨率、信噪比的情况下比较了三种算法的误差,并进行了仿真验证。证明了对快速相位相关算法的改进在精度方面有了一定的提高。     

传统织物的一次性设计

通过对纤维艺术的学习与研究,我对纤维构成织物的设计有了进一步的思考。在传统编织基础上不断发展起来的现代纤维艺术,一方面在艺术领域得到了有目共睹的长足发展,另一方面在市场经济下也不断地回归实用与设计。在纤维构成织物的设计中包括直接完成半成品或成品的一次性设计和在此基础上进行的二次性设计。尤其,对"传统织物的一次性设计"进行研究是很有必要的。     

A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

Evanescent wave sensor based on permanently bent single mode optical fiber

A novel refractive index sensing scheme based on evanescent wave interaction through locally and permanently bent single mode optical fibers is proposed. Local and permanent bends in single mode optical fibers enable significant power coupling between core and cladding modes. Order and number of excited cladding modes depend on bend features and determine the field profile at the output of the bent region. This in turn constitutes a simple mechanism to tailor the field distribution in single mode optical fibers useful for spatial light modulation. Moreover, since guided cladding modes are strongly influenced by the surrounding refractive index (SRI), the power transmitted at the output of the bent region as well as its dependence on the optical wavelength are strongly sensitive to the SRI opening new scenarios in sensing applications.     

分布式光纤振动传感系统的多级零频点定位研究

为了减少直线结构Sagnac分布式光纤传感系统的定位误差,提出一种多级零频点的优化方法,通过分析直线结构Sagnac分布式光纤传感定位原理,确定固定的采样速率下离散化是造成定位误差大的原因.并分析得出振动信号频域曲线会周期出现多个零频点,进而对振动定位的多级零频点优化方法进行了理论推导,阐明高倍零频点下的定位误差会有效减小.通过实验验证表明,在总长为11.769 km的传感光纤上,优化后的定位方法在不改变采样速率下可保证定位误差提升到±20 m范围内,可以基本满足系统对外界振动信号进行精确定位的要求.     

Polarized light imaging of white matter architecture

Polarized light imaging (PLI) is a method to image fiber orientation in gross histological brain sections based on the birefringent properties of the myelin sheaths. The method uses the transmission of polarized light to quantitatively estimate the fiber orientation and inclination angles at every point of the imaged section. Multiple sections can be assembled into a 3D volume, from which the 3D extent of fiber tracts can be extracted. This article describes the physical principles of PLI and describes two major applications of the method: the imaging of white matter orientation of the rat brain and the generation of fiber orientation maps of the human brain in white and gray matter. The strengths and weaknesses of the method are set out.     

一种智能光纤位移传感器

介绍一种用神经网络实现无级查表功能的光纤位移传感器。其非线性误差小于0．3％FS。具体介绍了硬件原理和使用神经网络的方法。     

高收缩共聚酯合成性能与成纤性能研究

通过共聚酯PEIT(间苯二甲酸、对苯二甲酸、乙二醇共聚物)的合成及其全拉伸丝(FDY)纺丝的成功实验,研究了高收缩PEIT共聚物合成工艺中共聚组分间苯二甲酸(IPA)的摩尔百分数对共聚酯PEIT的玻璃化温度、熔点的影响,探讨了该PEIT共聚物的结晶性能及其纺丝工艺条件对高收缩纤维性能的影响。     

我国超高分子质量聚乙烯纤维的检测手段及发展现状

根据国内主要超高分子质量聚乙烯纤维制造商产品的测试结果,论述了国产该纤维的主要性能及其与国外同类产品的质量差距,论述了目前我国各生产厂家及相关检测机构在强度、模量、断裂伸长、耐磨性、蠕变率、分子质量等纤维主要性能测试中存在的问题,提出了解决建议,同时指出了我国在超高分子质量聚乙烯纤维应用方面与国外的差距．     

浅谈涤纶FDY生产新技术──TCS一步法的特点

ＴＣＳ系指德国巴马格公司最新推出的细旦涤纶纺丝技术，该技术突破了热辊拉伸这一传统的涤纶纺丝模式，以甬道中的热空气为传热媒体，使丝条在稳定均一的热环境中完成拉伸过程。ＴＣＳ与ＣＷ６超高速卷绕机配合使用，可在极高的纺速下一次形成比较完善的纤维结构，从而获得条干和染色性能优异的成品纤维。该文介绍了该技术的工艺流程、设备结构和产品特点等。