酶/酸水解毛叶木姜子中键合态香味成分的比较

采用AmberliteXAD-2树脂吸附洗脱分离毛叶木姜子中的键合态香气物质前体,将分离得到的键合态香气物质前体在AR2000酶、果胶酶和酸3种条件下分别进行水解释放,采用气相色谱-质谱联用法(GC-MS)对水解后的键合态香气物质进行分离分析。结果表明:3种水解条件得到的键合态香气物质共有90种,主要为萜烯类和含氧萜类物质。其中,香叶醇在2种酶水解条件下均含量高,果胶酶水解条件下含量最高达21798.79μg/L;共34种香气物质具有明显香气特征,2种酶水解下最显著的香气特征为花香和甜香;酸水解条件下最显著的香气特征为花香。酶水解与酸水解条件下得到的键合态香气物质存在明显差异,果胶酶水解条件下所检出的香气物质种类多且含量较高。因此,果胶酶处理更有利于毛叶木姜子键合态香气成分的释放。     

取代基及分子量对非离子型纤维素醚表面特性的影响

根据Washburn的浸渍理论(Penetration Theory)和van Oss-Good- Chaudhury的组合理论(Combining Theory)及应用柱状灯芯技术(Column Wicking Technique),对几种非离子型纤维素醚,如甲基纤维素、羟丙基纤维素和羟丙基甲基纤维素的表面特性进行了测试。由于这些纤维素醚的取代基、取代度和分子量不同,所以它们的表面能及其组成部分有着明显的差异。数据说明,非离子型纤维素醚Lewis碱大于Lewis酸,表面自由能的主要成分是Lifshitz-van der Waals力。羟丙基的表面能及其成分都大于羟甲基。而在相同取代基和取代度的前提下,羟丙基纤维素的表面自由能正比于分子量;而羟丙基甲基纤维素的表面自由能则正比于取代度,反比于分子量。实验还发现非离子型纤维素醚中的取代基羟丙基和羟丙基甲基的表面能似乎都大于纤维素的表面能,而实验证明所测试得出的纤维素的表面能及其成分的数据是与文献所吻合的。     

A study on cashew nut oil composition

Eight samples of cashew nut oil were assayed, and the component triacylglycerols, fatty acids and several unsaponifiable compounds were analyzed by gas chromatography (GC) and high-performance liquid chromatography (HPLC). Total lipid amount, unsaponifiable percentage, fatty acids, sterols, triterpene alcohols and tocopherols are reported here. The combination of GC and HPLC enhanced the resolution of compound classes.     

陶瓷部件挤出成型工艺

本文以蜂窝陶瓷生产工艺为例，讨论了陶瓷部件挤出成型过程中，塑性泥料的制备、成型、干燥和烧成等工艺技术和装备问题。     

现代汽车非金属部件的修补涂装

介绍了汽车塑料件的识别、预处理和修补涂装。     

Thermooxidative degradation of natural rubber/clay composite

The clay is treated with a reducing agent and an acid so as to obtain a clay containing various metal components with a variable‐valence state. Then, the clay is coprecipitated with natural rubber (NR) latex to prepare a vulcanized NR/clay composite. The degradation process of the NR/clay composite under hot air condition was studied dynamically by using a Fourier transform infrared spectrometer attaching an in situ sample cell and was also investigated using the TGA method. The test result obtained from the infrared spectrometry indicated that under low decomposition temperature, the decomposition products of the test samples mainly are ethylene, low molecular olefinic hydrocarbon, and carbonyl compounds. As the decomposition temperature rises, the low molecular olefinic hydrocarbon content decreases, the olefine with longer chain is formed, and a lot of alkane decomposition products are formed at the same time. When the content of the metal components with a variable‐valence state in clay such as Cu, Mn, Co, and Fe increases, the oxidation products containing the carbonyl group, the olefinic hydrocarbon, and CO₂ in the decomposition product of the test sample also increase. The TGA result clearly shows a shoulder peak that appears by the side of the main peak on the DTG curve of NR/clay composite. With the increase in the content of metal components with variable‐valence state in clay, the initial degradation temperature of the test sample (T₀), the degradation peak temperature (T_p1), and the final degradation temperature (T_f1) in first‐stage reaction, as well as the degradation peak temperature (T_p2) and the last final degradation temperature (T_f) in second‐stage reaction of all the test samples more or less shift to the direction of low temperature; besides, the activation energy (E) of the reaction of the test samples more or less decreases. This means that the metal components with variable‐valence state promote the oxidative degradation of the clay–rubber masterbatch. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3809–3815, 2006     

Adsorption of aroma chemicals on cotton fabric from aqueous systems

The adsorption of aroma chemicals on cotton fabric was studied relative to the surfactant concentration, surfactant type, water solubility, and fiber morphology. The adsorption increased with increasing surfactant concentration to a maximum near the critical micelle concentration, then decreased with further increases in surfactant concentration. The adsorption also was found to be highly dependent on the fiber surface area and pore structure; dramatic differences were observed between untreated and mercerized cotton fabric and are believed to be due to morphological differences. Cationic and anionic surfactants increased the aroma chemical adsorption, which varied with surfactant type, with cetyltrimethylammonium chloride (CTAC)>sodium dodecyl sulfate (SDS)>H₂O. Water solubility also influenced adsorption; in most cases, adsorption increased with water solubility. In addition, adsorption was also influenced by chemical structure and hydrophobic interactions. The adsorption of aroma chemicals on cotton fabric can be attributed to the aqueous solution being physically held in capillaries and pore structures within the fibular structure of cotton fiber and also to molecular interactions among the aroma chemical molecules, surfactants, and cotton substrate.     

丙烯酸高级酯共聚物组成与其无皂乳液稳定性研究

制备了不同分子结构的丙烯酸高级酯共聚物无皂乳液,测定了丙烯酸和甲基丙烯酸十六酯的竟聚率,考察了共聚物的组成对无皂乳液电解质稳定性、机械稳定性和pH值稳定性的影响。结果显示,丙烯酸竟聚率为2.32,甲基丙烯酸十六酯竟聚率为0.59,随共聚物中丙烯酸组分含量增加,乳液粒子表面羧基含量增大,乳液机械稳定性和pH值稳定性提高,乳液适合在偏碱性条件下使用。     

基于通信流量特征的隐秘P2P僵尸网络检测

针对目前基于网络的P2P僵尸网络检测中特征建模不完善、不深入的问题, 以及僵尸网络中通信具有隐蔽性的特点, 提出一种对通信流量特征进行聚类分析的检测方法。分析P2P僵尸网络在潜伏阶段的通信流量统计特征, 使用结合主成分分析法和X-means聚类算法的两阶段聚类方法对特征数据集进行聚类分析, 进而达到检测P2P僵尸网络的目的。实验结果表明, 该方法具有较高的检测率和较好的识别准确性, 并保证了较快的执行效率。     

湿浸法制备活性组分非均匀分布负载型催化剂过程的计算机模拟

对活性组分非均匀分布的负载型催化剂的湿浸法制备过程进行了计算机模拟,其模拟程度可适用于任意多个活性组分的浸渍。发现单组分浸渍时,通过控制浸渍时间可获得活性组分由薄到厚的蛋壳型分布和均匀分布,但通过预浸渍吸附至一定分布后,再在空白溶液中浸渍洗脱,控制洗脱条件也可获得蛋黄、蛋白型的分布;加入竞争吸附剂,进行双组分及多组分浸渍,通过控制浸渍溶液性质及浸渍时间可获得各种类型的活性组分分布,诸如蛋壳型、蛋白型、蛋黄型和均匀型。通过对制备过程参数(如竞争吸附剂的选择、各组分有效扩散系数、初始浓度、吸脱附速率常数等)与活性组分分布形式之间关系的分析,可实现对任一分布形式的催化剂的制备过程参数的优化。这对实际制备催化剂具有指导意义。