隔壁精馏塔分离芳烃混合物的模拟研究

采用隔壁精馏塔分离苯-甲苯-对二甲苯物系,用Aspen Plus软件模拟了隔壁精馏塔内温度分布及液相组成分布,考察了汽相和液相分配比对产品纯度的影响。对隔壁精馏塔模拟得到的优化操作条件为:隔壁精馏塔的理论板数为30块,侧线采出在第14块理论板,进料段为15块理论板,在进料段的第7块理论板进料,进料组成n(苯)∶n(甲苯)∶n(对二甲苯)为1∶3∶1,回流比为8.8,液相分配比为2.96,汽相分配比为0.83。在此条件下,各组分的摩尔分数大于98.5%,与实验结果基本吻合。当进料组成n(苯)∶n(甲苯)∶n(对二甲苯)为1∶3∶1时,采用隔壁精馏塔可比常规两塔流程节能27.18%。     

Preliminary Assessment of Contaminants in Soft Sediments of the Detroit River

Soft sediments from the Detroit River were analyzed for the USEPA priority pollutants to generally characterize contaminant distribution. Forty-three were detected. Highest heavy metal concentrations were found in the Trenton Channel and immediately downstream of Grosse Ile. They ranged from an area mean (N = 2) of 0.19 mg/kg mercury to 338.7 mg/kg zinc (dry weight). Polynuclear aromatic hydrocarbons ranged from 0.1 mg/kg to 38.8 mg/kg (mean, N = 2) with the highest levels near Grosse Ile. PCBs ranged from 0.015 mg/kg to 1.7 mg/kg (mean, N = 2). Organochlorine pesticides were not detected except for a trace of heptachlor in one sample. Sediment contamination in the Detroit River is widespread with higher concentrations on the U.S. side downstream of the Rouge River and in the Trenton Channel. The significance of these in-place pollutants to biota and as a source to Lake Erie is still unknown.     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

S－148芳醇不饱和聚酯树脂耐腐蚀机理研究

合成了Ｓ－１４８芳醇不饱和聚酯树脂，研究了Ｓ－１４８树脂浇铸体和玻璃钢于不同温度下在不同介质中的耐酸、碱、盐腐蚀性能，并探讨了其耐腐蚀机理。结果表明，Ｓ－１４８树脂具有优异的耐腐蚀性能，可用作耐腐蚀制品的基体树脂。     

Viscosities of nonelectrolyte liquid mixtures. I. binary mixtures containing p-dioxane

Viscosity measurements are reported for p-dioxans with cyclohexane, n-hexane, benzene, toluene, carbon tetrachloride, tetrachloroethane, chloroform, pentachloroethane, and ethyl acetate at 303.15 K. Excess Gibbs energies of activation G ^*E of viscous flow have been calculated with Eyring's theory of absolute reaction rates. The deviations of the viscosities from a linear dependence on the mole fraction and values of G ^*E for binary mixtures have been explained in terms of molecular interactions between unlike pairs. The Prigogine-Flory-Patterson theory has been used to estimate the excess viscosity, ln , and corresponding enthalpy ln _H, entropy ln _S, and free volume ln _v terms for binary mixtures of p-dioxane with cyclohexane, n-hexane, benzene, toluene, carbon tetrachloride, and chloroform. Estimates of excess viscosities from this theory for p-dioxane with benzene, toluene, and carbon tetrachloride are good, while for the other three mixtures they are poor. The local-composition thermodynamic model of Wei and Rowley estimates the excess viscosity quite well even for p-dioxane mixtures with cyclohexane and n-hexane.     

Polycyclic Aromatic Hydrocarbons Activate the Aryl Hydrocarbon Receptor and the Constitutive Androstane Receptor to Regulate Xenobiotic Metabolism in Human Liver Cells

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants produced by incomplete combustion of organic matter. They induce their own metabolism by upregulating xenobiotic-metabolizing enzymes such as cytochrome P450 monooxygenase 1A1 (CYP1A1) by activating the aryl hydrocarbon receptor (AHR). However, previous studies showed that individual PAHs may also interact with the constitutive androstane receptor (CAR). Here, we studied ten PAHs, different in carcinogenicity classification, for their potential to activate AHR- and CAR-dependent luciferase reporter genes in human liver cells. The majority of investigated PAHs activated AHR, while non-carcinogenic PAHs tended to activate CAR. We further characterized gene expression, protein abundancies and activities of the AHR targets CYP1A1 and 1A2, and the CAR target CYP2B6 in human HepaRG hepatoma cells. Enzyme induction patterns strongly resembled the profiles obtained at the receptor level, with AHR-activating PAHs inducing CYP1A1/1A2 and CAR-activating PAHs inducing CYP2B6. In summary, this study provides evidence that beside well-known activation of AHR, some PAHs also activate CAR, followed by subsequent expression of respective target genes. Furthermore, we found that an increased PAH ring number is associated with AHR activation as well as the induction of DNA double-strand breaks, whereas smaller PAHs activated CAR but showed no DNA-damaging potential.     

Selective preparation of light aromatic hydrocarbons from catalytic fast pyrolysis vapors of coal tar asphaltene over transition metal ion modified zeolites

The catalytic cracking of coal tar asphaltene (CTA) pyrolysis vapors was carried out over transition met-alion modified zeolites to promote the generation of light aromatic hydrocarbons (L-ArHs) in a pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) micro-reactor system.The effects of ultra stable Y(USY),Co/USY and Mo/USY on the selectivity and yield of L-ArHs products and the extent of deoxygena-tion (Edeoxygenation),lightweight (Elightweight) from CTA pyrolysis volatiles were investigated.Results showed that the yields of L-ArHs are mainly controlled by the acid sites and specific surface area of the catalysts,while the deoxygenation effect is determined by theirs pore size.The Elightweight of CTA pyrolysis volatiles over USY is 9.65％,while the Edeoxygenation of CTA pyrolysis volatiles over Mo/USY reaches 20.85％.Additionally,the modified zeolites (Mo/USY and Co/USY) exhibit better performance than USY on L-ArHs production,owing to the synergistic effect of metal ions (Mo,Co) and acid sites of USY.Compared with the non-catalytic fast pyrolysis of CTA,the total yield of L-ArHs obtained over USY (4032 mg·kg-1),Co/USY (4363 mg·kg-1) and Mo/USY (4953 mg·kg-1) were increased by 27.03％,38.19％ and 54.78％,respectively.Furthermore,the possible catalytic conversion mechanism of transition metal ion (Co and Mo) modified zeolites was proposed based on the distribution of products and the characterizations of catalysts.     

缓香型玉米醇溶蛋白微胶囊乳液的制备及应用

为改善皮革的特殊气味并提升其应用性能,该研究以玉米醇溶蛋白（Zein）、艾叶香精（AAE）以及普兰尼克F127等为原料,通过反溶剂法制备缓香型玉米醇溶蛋白微胶囊（AAE@ZMs）乳液,再将AAE@ZMs乳液与成膜剂己内酰胺改性酪素复配后应用于皮革涂饰。结果表明,Zein与F127、AAE和戊二醛通过化学交联和氢键相互作用,同时F127和AAE可使Zein中的氨基酸重排并发生荧光猝灭;制得的AAE@ZMs乳液中微胶囊平均粒径约为298.6 nm且具有较好的分散性和稳定性;AAE@ZMs的包覆率和负载率分别可以达到73.2%和5.8%,在良溶剂中释放120 h时的AAE累积释放率约为83.1%。将AAE@ZMs应用于皮革涂饰后,涂饰革样中AAE的释放周期为6周,对金黄色葡萄球菌和大肠杆菌均具有较好的抑制效果,同时涂饰革样还展现出较好的机械性能。     

Supramolecular Nanofibers from Collagen-Mimetic Peptides Bearing Various Aromatic Groups at N-Termini via Hierarchical Self-Assembly

Self-assembly of artificial peptides has been widely studied for constructing nanostructured materials, with numerous potential applications in the nanobiotechnology field. Herein, we report the synthesis and hierarchical self-assembly of collagen-mimetic peptides (CMPs) bearing various aromatic groups at the N-termini, including 2-naphthyl, 1-naphtyl, anthracenyl, and pyrenyl groups, into nanofibers. The CMPs (R-(GPO)_n: n > 4) formed a triple helix structure in water at 4 °C, as confirmed via CD analyses, and their conformations were more stable with increasing hydrophobicity of the terminal aromatic group and peptide chain length. The resulting pre-organized triple helical CMPs showed diverse self-assembly into highly ordered nanofibers, reflecting their slight differences in hydrophobic/hydrophilic balance and configuration of aromatic templates. TEM analysis demonstrated that 2Np-CMP_n (n = 6 and 7) and Py-CMP₆ provided well-developed natural collagen-like nanofibers and An-CMP_n (n = 5–7) self-assembled into rod-like micelle fibers. On the other hand, 2Np-CMP₅ and 1Np-CMP₆ were unable to form nanofibers under the same conditions. Furthermore, the Py-CMP₆ nanofiber was found to encapsulate a guest hydrophobic molecule, Nile red, and exhibited unique emission behavior based on the specific nanostructure. In addition to the ability of CMPs to bind small molecules, their controlled self-assembly enables their versatile utilization in drug delivery and wavelength-conversion nanomaterials.     

Ni/W比对NiWCx催化剂加氢性能的影响

过渡金属碳化物具有类似贵金属的电子结构和加氢性能。采用等体积浸渍法制备了不同Ni/W比的NiW/γ-Al₂O₃催化剂,以程序升温碳化法转化为NiW碳化物后对芳烃模型化合物和低温煤焦油中分离所得芳烃组分进行加氢处理。催化剂的N₂吸附、XRD、H₂-TPR和SEM表征表明,Ni的添加促进了载体表面WO₃物种的分散和还原,抑制了WO₃晶体的团聚和大晶粒的生成。萘的加氢实验表明,Ni/W原子比为0.6时催化剂的活性最佳,而添加苯酚和吡啶后的模型油加氢过程中萘的转化率和十氢萘的产率均明显下降,Ni/W原子比为0.47和0.6的催化剂性能相近,煤焦油中芳烃组分加氢后Ni/W原子比为0.47的催化剂性能更优。结果表明,Ni和W均具有良好的加氢活性,但Ni耐杂原子性能较差,二者存在一个最佳的配比以使加氢性能更优。有杂原子化合物存在时,如煤基芳烃组分的加氢,Ni/W原子比为0.47的NiW碳化物催化剂具有更好的加氢性能。