Dental amalgam – the effect of the technology of alloy powder preparation on the corrosion behaviour and the release of mercury

Dental amalgams are based on a broad spectrum of materials differing in their chemical composition, metallurgical treatment, and in the way the initial alloys powders are prepared. In addition to their chemical composition, amalgams based on various powders differ in both their microstructure and the amount of mercury needed for preparation. All these facts may affect electrochemical processes occurring during their interaction with oral fluids, and also mercury release. While verifying the effect of the technology used for the preparation of the high‐copper ternary alloy powder on the properties of resulting amalgams, this study aimed at the mechanism of their interaction with a model saliva solution as well as mercury release was included. Measurements were done in a model saliva solution using standard electrochemical methods and exposition measurements. The interaction of individual types of amalgams with artificial saliva did not reveal any significant differences. The free corrosion potential of all these amalgams in an aerated solution settled in the range of values in which tin oxidation, resulting in a layer of insoluble corrosion producsts, turned out to be the dominant anodic process. The rate of mercury release was the lowest for amalgams based on a gas‐atomized alloy. The highest rate of mercury release, and also its dependence on time, was exhibited by lathe‐cut powder based amalgam. In addition to different volume fraction of the Ag‐Hg phase and the level of its tin alloying, this different behaviour may be explained by differences in the rate at which a layer of tin corrosion products acting as a barrier to mercury release is formed.     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Environmental Effects of Hydro-Electric Power Generation in Africa and the Potential for Artificial Floods

Electricity is a fundamental requirement for economic growth, and hydro-electric power is often thought to be environmentally benign. However, the construction and operation of many hydro-power dams in Africa have had significant negative impacts on the environment and rural economies. Reduced downstream flooding has destroyed fisheries and starved the floodplain soils of moisture and nutrients. Often the worst-affected areas have no electrification and therefore do not benefit from power generation. New dams which are planned in Kenya and Tanzania have been specifically designed to make flood releases. This will allow electricity to be generated whilst maintaining a dynamic flooding pattern for the short-term economic importance of fisheries and agriculture and the longer-term importance of soil fertility and biodiversity. Involvement of local community representatives in deciding when flood waters should be released on the Phongolo River in South Africa has resulted in substantial benefits to floodplain users.     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

How to make and defend a proposal in a deliberation dialogue

In this paper it is shown how tools developed in argumentation theory and artificial intelligence can be applied to the development of a new dialectical analysis of the speech act of making a proposal in a deliberation dialogue. These tools are developed, modified and used to formulate dialogue pre-conditions, defining conditions and post-conditions for the speech act of making a proposal in a deliberation dialogue. The defining conditions set out what is required for a move in a dialogue to count as the making of a proposal by one of the parties. What is required are the conditions that (1) the move fit the requirements of the argumentation scheme for practical reasoning, and (2) the premises are propositions describing common goals of both parties or propositions that they reasonably consider means to achieve these goals. The analysis goes beyond the standard speech act approach by specifying not only the normative requirements for making a well-formed proposal, but also the requirements for responding to it by questioning or criticizing it, and the requirements for defending it.     

专家系统在化工中的应用进展

本文综述了近年来专家系统在化工领域的应用状况，并指出今后的发展趋势。     

孤东油田的海油陆采进展

孤东油田极浅海区域新发现几个边际油藏。其中垦东401块水深-2m,距陆地2.7km,为稀油、疏松砂岩油藏,试油获14～25t/d工业油流。在三维地震、测井约束地震反演、数值模拟和油藏经营管理评价基础上编制了产能建设方案,通过修筑海公路、人工岛、丛式井组、大位移水平井、采用数据采集与控制的远程测控和紧急关断技术,能够无人职守、遥测遥控,整体实现了海油陆采。有效动用地质储量233×104t,钻井12口,建成年产油4×104t能力,累产油8.6×104t。目前在垦东12人工岛上钻打了26口井,推广了海油陆采经验。     

AI paradigms

The aim of this paper is comparative analysis of most important AI paradigms. An AI paradigm is defined as the pair composed by a concept of intelligence and a methodology in which intelligent computer systems are developed and operated. Three paradigms, the behaviourist paradigm, the agent paradigm, and the artificial life paradigm are discussed.