SC文法功能体系

文法体系的研究一直是自然语言处理研究的核心问题之一.但是,由于自然语言本身所固有的复杂性和非规范性,多义问题始终未能得到圆满的解决.本文提出了SC文法(A SubCategory grammar for integrating Se-mantic and Case analysis),它是一种基于传统的上下文无关文法、语义文法,以及超前与反馈分析技术和格框架约束分析等技术的上下文相关处理文法.该文法不仅能继承传统的上下文无关文法的表示简洁、处理方便的特点,而且能实现语法和语义一体化分析和处理上下文相关以及复杂多义问题.     

骑马岭水电站砂石加工系统规划设计

介绍了骑马岭水电站砂石加工系统的料源规划、系统规划设计、系统工艺流程及环保措施。该加工系统采用的典型的二段破碎工艺，对中小型水电站混凝土骨料生产系统的设计具有一定的参考价值。同时，该加工系统在废水处理水回收利用及细砂与石粉回收、防尘、降低噪声，以及固体废弃物处置等方面，均采取了相应的环保措施，以减少其对施工人员和周围环境的影响。     

Dental amalgam – the effect of the technology of alloy powder preparation on the corrosion behaviour and the release of mercury

Dental amalgams are based on a broad spectrum of materials differing in their chemical composition, metallurgical treatment, and in the way the initial alloys powders are prepared. In addition to their chemical composition, amalgams based on various powders differ in both their microstructure and the amount of mercury needed for preparation. All these facts may affect electrochemical processes occurring during their interaction with oral fluids, and also mercury release. While verifying the effect of the technology used for the preparation of the high‐copper ternary alloy powder on the properties of resulting amalgams, this study aimed at the mechanism of their interaction with a model saliva solution as well as mercury release was included. Measurements were done in a model saliva solution using standard electrochemical methods and exposition measurements. The interaction of individual types of amalgams with artificial saliva did not reveal any significant differences. The free corrosion potential of all these amalgams in an aerated solution settled in the range of values in which tin oxidation, resulting in a layer of insoluble corrosion producsts, turned out to be the dominant anodic process. The rate of mercury release was the lowest for amalgams based on a gas‐atomized alloy. The highest rate of mercury release, and also its dependence on time, was exhibited by lathe‐cut powder based amalgam. In addition to different volume fraction of the Ag‐Hg phase and the level of its tin alloying, this different behaviour may be explained by differences in the rate at which a layer of tin corrosion products acting as a barrier to mercury release is formed.     

阳泉市常用地基处理方法探讨

对阳泉市常用地基处理方法进行了分析，从适用范围、设计要点、施工与检验等方面进行了论述，着重提出了阳泉市常用地基处理方法的特点与适用性。     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

构皮滩水电站烂泥沟砂石系统设计与实践

烂泥沟砂石系统是构皮滩水电站主体工程混凝土骨料加工的主要基地,共需加工混凝土骨料约600万m3,其料源为观景料场玉龙山灰岩,湿抗压强度大于50 MPa。该系统的骨料破碎筛分采用三段破碎四级筛分工艺,人工制砂采用棒磨机与立式冲击破联合制砂工艺。本文结合该系统工艺设计与施工,对系统设计中的关键技术进行了分析与总结。     

Environmental Effects of Hydro-Electric Power Generation in Africa and the Potential for Artificial Floods

Electricity is a fundamental requirement for economic growth, and hydro-electric power is often thought to be environmentally benign. However, the construction and operation of many hydro-power dams in Africa have had significant negative impacts on the environment and rural economies. Reduced downstream flooding has destroyed fisheries and starved the floodplain soils of moisture and nutrients. Often the worst-affected areas have no electrification and therefore do not benefit from power generation. New dams which are planned in Kenya and Tanzania have been specifically designed to make flood releases. This will allow electricity to be generated whilst maintaining a dynamic flooding pattern for the short-term economic importance of fisheries and agriculture and the longer-term importance of soil fertility and biodiversity. Involvement of local community representatives in deciding when flood waters should be released on the Phongolo River in South Africa has resulted in substantial benefits to floodplain users.     

人工神经网络在单晶合金设计中的应用

把一种新发展的功能极强的信息处理技术－计算机人工神经网络技术用于单晶合金的高温持久性能预测并和其它方法进行比较，结果表明：这种方法精度最高。