黑茶乙醇提取物以及其抗氧化性的研究

目的：研究黑茶的抗氧化性作用.方法：采用溶液超声波提取法提取出黑茶的乙醇提取物,再用分光光度法测定不同浓度的黑茶乙醇提取物对羟基自由基、DPPH自由基的抑制率以及还原能力.结果：在一定范围内,随着黑茶提取物的含量增加其对自由基的抑制作用以及还原能力都逐渐增强.当提取液体积为0.20 mL时,提取液对羟基自由基的抑制达到最大为51.70％.在黑茶提取液体积达到0.16 mL时,其对DPPH自由基的抑制达到最高为87.44％.黑茶提取物的还原能力,在一定浓度范围内呈现正相关性A=0.040 3＋2.007 4V,相关系数为0.999 6.结论：黑茶乙醇提取物具有较好的抗氧化性.     

黑启动条件下风储系统控制策略研究

风能作为一种可再生能源迅速发展,并且随着储能技术在风力发电中的应用,风储联合发电系统已能够提供持续可靠供电。利用PSCAD仿真软件对风机和储能联合单元模型进行建模仿真。分别对储能电池启动风机,以及风机给储能电池充电的过程进行了仿真,对仿真波形进行分析,验证了控制策略的有效性。     

Impact of graphene oxide nanoparticles and carbon black on the gamma radiation sensitization of acrylonitrile–butadiene rubber seal materials

Seals prepared from acrylonitrile–butadiene rubber (NBR) are primarily used in nuclear services. Nevertheless, at relatively high ionizing radiation doses, NBR seal materials may undergo radiation-induced degradation processes, leading to adverse effects on the sealing ability life. Herein, to strengthen the functional characteristics of NBR seals against radiation, graphene oxide (GO) nanoparticles were prepared and characterized by transmission electron microscopy, X-ray diffraction (XRD), Fourier transform infrared (FTIR), and ultraviolet/visible spectroscopies. Various NBR/GO composites fabricated with different ratios of GO nanoparticles and in the presence or absence of carbon black (CB) were investigated via cross-linking density, scanning electron microscopy, XRD, FTIR, and mechanical and thermal stability analyses. The synergistic effect of the simultaneous presence of GO and CB on the NBR seal sensitization to gamma radiation up to a dose of 1 MGy was studied. The physicomechanical properties were enhanced by adding GO nanosheets up to 3 phr and by incorporating 35 phr of a CB with GO until 5 phr. Further, the application of γ-irradiation resulted in an overall enhancement in the mechanical, physical, and thermal stability of the prepared composites up to 0.5 and 1 MGy with GO nanosheets in the absence or presence of CB particles, respectively. The mechanical measurements indicated significant increments by loading with GO nanosheets in the absence and presence of CB as well as by irradiation. The tensile strength elevated up to about 121%, 336%, and 366% by adding 3 phr GO, 3 GO:35 CB phr, and 5 GO:35 CB phr, respectively.     

碳纤维表面电镀铜

研究了碳纤维表面进行镀铜处理的镀液组分及工艺条件。电镀前先在马弗炉中600～800℃下对碳纤维进行氧化处理。镀液采用水浴加热,温度控制在35～40℃,电流密度为0.5～2.5A·dm-2,最佳pH值为9.0±0.5。采用本实验工艺在碳纤维表面镀铜,效率高,镀层均匀,厚度为1.5～2.0μm,基本上消除了“黑心”现象。     

高耐蚀性热镀锌板的钝化处理工艺探讨

介绍了热镀锌板钝化膜的形成机理 ;针对攀钢热镀锌板出现白锈、黑斑等问题 ,分析了钝化液pH值、添加剂及操作条件对钝化膜质量的影响 ,同时提出了改进热镀锌板耐蚀性能的措施     

深度整合Flex和Spring

本文讨论了基于Springblaze DS integration的Flex与spring的整合方案,给出把来自Flex的请求映射到bleeDS的方法,说明了在Spring的配置文件中为Flex暴露bean的方法。     

Suboptimal robust synthesis for MIMO plant under coprime factor perturbations

Suboptimal robust synthesis for MIMO nominal system under coprime factor perturbations is considered in classical and non-classical statements. In the classical statement, weights of perturbations and upper bound on magnitude bounded exogenous disturbance are assumed to be known to controller designer. Suboptimal synthesis within ε tolerance is reduced to the solution of log₂(1/ε) standard mixed sensitivity problems of ℓ₁ optimization. In the non-classical statement, the upper bounds on perturbations and exogenous disturbance are to be estimated from measurement data and suboptimal synthesis is reduced to the solution of 1/ε mixed sensitivity problems.     

control with limited communication and message losses

We propose an H^∞ approach to a remote control problem where the communication is constrained due to the use of a shared channel. The controller employs a periodic time sequencing scheme for message transmissions from multiple sensors and to multiple actuators of the system. It further takes into account the information on the random message losses that occur in the channel. An exact characterization for controller synthesis is obtained and is stated in terms of linear matrix inequalities. Furthermore, an analysis on the loss probabilities of the messages to accomplish stabilization is carried out. The results are illustrated through a numerical example.     

Stability of iterative processes with errors for a system of nonlinear -accretive variational inclusions in Banach spaces

In this paper, by using the concept of (A,η)-accretive mappings and the new resolvent operator technique associated with (A,η)-accretive mappings, we introduce and study a system of general mixed quasivariational inclusions involving (A,η)-accretive mappings in Banach spaces, and construct a new perturbed iterative algorithm with mixed errors for this system of nonlinear (A,η)-accretive variational inclusions in q-uniformly smooth Banach spaces. Our results improve and generalize the corresponding results of recent works.     

碳黑/聚乙烯醇电纺复合纤维的制备与气敏特性研究

通过碳黑(CB)/聚乙烯醇(PVA)混合溶液的电纺,制备了掺纳米CB的PVA复合纤维,用扫描电镜(SEM)观察了它的形貌。CB/PVA复合纳米纤维的形貌取决于混合物中CB的含量。随CB含量的增加,CB颗粒在纤维中的分布逐渐变得均匀;最佳CB/PVA的质量比为3∶10;继续增加CB含量,CB颗粒聚合成团析出,杂乱分布于PVA纤维中。乙醇蒸气测试表明:质量比为3∶10的CB/PVA纤维具有灵敏度高、响应恢复快等特点。