炭黑表面的纳米结构对橡胶的补强作用

通过扫描隧道显微镜(STM)技术了解到炭黑粒子表面的鳞片状石墨微晶组成的纳米级精细结构，并研究炭黑对橡胶的补强机理。研究表明，炭黑表面的纳米结构使橡胶分子链网络缠绕在炭黑表面，并将外来应力分散到其它分子网络上，共同分担应力，使橡胶弹性体体系不至于迅速破坏。     

Time dependences of conduction and self‐heating in acetylene carbon black‐filled high‐density polyethylene composites

The time dependences of electrical conduction and self‐heating behaviors in high‐density polyethylene filled with acetylene carbon black of 0.082 in volume fraction are studied in relation to voltage and ambient temperature. The characteristic decay current constant τ_i, and the exponential growth time constant for self‐heating τ_g are determined for the samples under voltages U above the critical value U_c for the onset of self‐heating. The influences of voltage and ambient temperature on τ_i and τ_g as well as the amplitude of the low‐resistance to high‐resistance switching are discussed on the basis of the random resistor network (RRN) model and the relationship between U_c and the intrinsic resistivity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1124–1131, 2006     

NT－C炭黑在内胎胶中的应用试验

在汽车内胎胶中以改性活性炭炭黑（ＮＴ－Ｃ）增量代替半补强炭黑，微调配方，不改变工艺，成品物理机械性能不受影响，此胶料密度小、价格低，热拉伸变形小。     

导电复合材料的研究

以铝粉，乙炔炭黑，石墨等导电填料，不饱和聚酯树脂为基休一项玻璃纤维布为增强材料制成复合型导电复合。研究了导电填料不同种类，添加量对复合材料性能的影响。     

新型偶联剂对橡胶力学性能的影响

本文讨论了新型偶联剂用量对陶土填充橡胶与炭黑填充橡胶动态性能与力学性能的影响．并且用红外光谱对偶联剂改性陶土表面进行了表征。结果表明：该偶联剂明显提高硫化胶的动态性能、撕裂强度及陶土填充橡胶的拉伸强度，其用量超过１．５重量份对硫化胶的力学性能有不良影响。     

硅烷改性炭黑对胶料性能的影响

通过试验讨论了用ＴＥＳＰＴ改性处理的炭黑在橡胶配方中对胶料性能的影响。试验结果表明，ＴＥＳＰＴ改性后不仅可改善胶料的动态特性，而且有益于橡胶的补强。     

炭黑密相气力输送系统设计

随着橡胶工业的发展，以及气力输送特有的优点，气力输送系统越来越广泛地应用于输送炭黑的过程中。以炭黑气力输送系统为研究对象，详细介绍了系统设计的基本参数确定、气力输送形式的确定、压送罐客积的设计、输送管道的设计，并通过输送系统压力降的计算验证了设计参数的取值是合理的。     

Piezoresistivity in Polymer-Ceramic Composites

Composite materials composed of randomly dispersed semiconducting ceramic particles in an insulating polymer matrix show a pronounced change in resistivity with pressure. Different amounts of iron oxide (Fe₃O₄) powder and antimony-doped tin oxide (SnO₂:Sb) powder were dispersed in an epoxy polymer matrix to form pressure-sensitive composites. In each family of materials, an insulator-to-semiconductor transition is observed in agreement with percolation theory. Composites within a certain range of filler content showed substantial piezoresistive effect under both uniaxial and hydrostatic pressure in which sensitivity is controlled by the choice of filler material and the volume fraction. The effect of temperature on the piezoresistance effect was also examined. Piezoresistors made from Fe₃O₄ composites showed larger temperature changes than those filled with Sb-doped SnO₂.     

炭黑对轮胎胎面胶热物性的影响

研究了炭黑品种和用量对轮胎胎面胶热扩散系数(α)、导热系数(λ)及比热容(C)3种热物性参数的影响规律。结果表明,随着炭黑填充量的增加,胎面胶的α及λ均逐渐增大,C逐渐减小。炭黑的结构性对胎面胶α的影响程度大于炭黑的粒径;温度相同时,炭黑的结构性越高,其填充胎面胶的α越大;随着炭黑填充量的增加,3种炭黑填充胎面胶α之间的差距呈现先增大后减小的变化趋势。炭黑的结构性及粒径对胎面胶C的影响没有固定的规律,但在低温区,炭黑的粒径越大,其填充胎面胶的C越大,且炭黑填充量对此差距无影响。炭黑的结构性对胎面胶λ的影响程度大于炭黑的粒径;温度相同时,炭黑的结构性越高,其填充胎面胶的λ越大;当炭黑用量较低时,其对胎面胶λ的影响程度相对较小,随着炭黑填充量的增加,3种炭黑填充胎面胶λ之间的差距呈现先增大后减小的变化趋势。     

炭黑填充硬聚氯乙烯的改性

为使聚氯乙烯具有抗静电性能,采用加入具有导电性填料的方法,但加入大量的填料,会使硬聚氯乙烯的冲击性能降低,加工性能变差。本文是在以炭黑为填料的基础上,研究不同的改性剂和加工助剂改进硬聚氯乙烯的效果,结果表明,加入冲击改性剂和加工助剂后,大大增加了硬聚氯乙烯的冲击强度,且加工性能也得到改善,同时由于炭黑具有补强效果,其拉伸强度和弯曲强度在加入改性剂后也能满足使用要求。