绒类织物增光增艳整理

选用多功能复合型绒类织物增光增艳整理剂FSR－2，对纯棉条绒织物进行光泽整理，讨论了光泽剂、交联剂及工艺条件对整理效果的影响，得出了最佳的增光增艳整理工艺。     

小提花横机常见选针出故障的原因及处理方法

介绍了选针片式小提花横机常见选针故障的各种原因，并对不同原因导致的选针故障提出了针对性解决方法。     

四川马海毛钢花呢的试制

根据四川马海毛原料资源的品质特性，运用精纺粗做的方法，成功地试制出手感滑糯而富有弹性、光泽明亮悦目，各项物理指标符合FZ/T24002-93标准的四川马海毛纯毛钢花呢，达到了马海毛产品的特殊风格。同时指出四川马海毛制成率偏低。     

细旦涤纶50/长绒棉30/丽赛20 7.3 tex高支纱的开发

介绍了细旦涤纶50/长绒棉30/丽赛20纤维的性能,及其混纺纱的生产加工工艺,针对生产中存在的问题,采取了有效的措施,生产的7.3 tex混纺纱线,满足了市场的要求。     

Study on combustion characteristics of blended coals

Power plants in China have to burn blended coal instead of one specific coal for a variety of reasons. So it is of great necessity to investigate the combustion of blended coals. Using a test rig with a capacity of 640 MJ/h with an absolute milling system and flue gas online analysis system, characteristics such as burnout, slag, and pollution of some blended coals were investigated. The ratio of coke and slag as a method of distinguishing coal slagging characteristic was introduced. The results show that the blending of coal has some effect on NO _x but there is no obvious rule. SO _x emission can be reduced by blending low sulfur coal. Translated from Proceedings of the CSEE, 2005, 25(18): 97–103 [译自: 中国电机工程学报]     

织物树脂层压复合材料抗弹性能研究

针对防弹织物树脂层压复合材料的研制，考察了层压复合材料面密度，纤维类型，树脂体系，铺层混杂方式及纤维混杂分数，织物铺层，预置分层等因素对层压复合材料靶板弹道冲击性能的影响。     

膜结构裁剪膜片展开的二次测地线法

本首先对目前应用较广的膜结构裁剪方法，即裁剪线生成与图形展开的方法进行了比较研究，并在此基础上提出了一种新的裁剪方法——二次测地线法．通过对有理论解算例的分析及对不同形式的膜结构进行裁剪，验证了本方法的正确性、可靠性及广泛适用性．     

Two-stage fatigue loading of woven carbon fibre reinforced laminates

A brief review of the models used to predict the cumulative fatigue damage in FRP composites is presented. Two‐stage fatigue loading of a [0/90,± 45₂,0/90]_s quasi‐ isotropic woven carbon fibre/epoxy resin laminate was evaluated at stress ratio R = 0.05 and the failure mechanisms investigated using x‐radiography after each loading stage. The results are presented in terms of fatigue strength and damage growth and are compared with those in the literature. A low‐to‐high loading sequence is more damaging than a high‐to‐low one and the Palmgren‐Miner linear damage rule may no longer be valid for this kind of material, as previously reported.     

织物-树脂复合材料层压板的准静态侵彻机理

本文利用MTS得到了芳纶和高强维纶织物复合材料层压板受尖头侵彻体穿孔的准静态侵彻曲线 ,比较和分析了不同类型纤维集合体与热固性树脂和热塑性树脂复合材料的破坏模式 ,并考察了芳纶织物复合材料层压板侵彻的逐步破坏过程 ,揭示了复合材料层压板的准静态侵彻机理。     

提花织物意匠和纹板CAM系统

CAM系统的研制是从国情出发,保持传统产品特点和工艺要求,能适应多品种多规格的需要,有使用方便和通用性强的优点,并且在小样彩色图案的输入和识别处理、意匠过程中顺势间丝、影光、泥地处理等难题上有突破性发展,达到了实用要求。