Influence of the Temperature of a Body on Its Weight

The physical preconditions are considered for the temperature of a body to influence the force of gravity experienced by it. The results are given of experiments on weighing metal rods heated by ultrasound which confirm a dependence of the weight of the rods on their temperature.     

钨系延期药预点火反应机理研究

通过程控升温模拟点火条件，根据ＤＳＣ图谱分析，找出主要反应区的温度范围。研究结果表明，钨系延期药预点火反应是一个真正的固－固反应。     

Temperature and pressure effects on supercritical CO2 extraction of tomato seed oil

Tomato seed oil was extracted with supercritical carbon dioxide in a semibatch-flow extractor within the temperature range 313–343 K and the pressure range 10.8–24.5MPa. The extraction rates increased with pressure, but decreased with temperature increase because of the variation in solvent density and resultant differences in oil solubility. The fatty acid composition of the extracted oil was similar to that of soybean oil.     

焦化防砂室内实验研究

油井防砂工艺技术的研究与发展对疏松砂岩油藏的正常开采至关重要.焦化防砂是通过向地层内注入热空气使原油在高温下发生氧化裂解生成焦炭从而将地层砂固结的一种防砂新技术.为了对该项技术进行全面系统的理论分析与评价,设计并制作了一套焦化防砂实验装置,利用该装置进行了焦化防砂室内实验研究.焦化效果以岩样的抗压强度进行评价,实验结果表明,影响焦化后岩样抗压强度的主要因素为空气最高温度、处理时间和空气流量.此外,对焦化处理后的岩样所作的岩样组成分析揭示出,稠油胶结机理为氧化作用使部分油分和胶质变成沥青质,沥青质受到高度的缩合作用而成为高分子量的甲苯不溶物.由于新生胶质的氧化比原生胶质的氧化困难得多,因此适合焦化防砂的油层,其原油必须含有一定量的原生胶质和沥青质.     

一种新型润滑油添加剂的质谱研究

采用独特的分离方法和途径，综合使用多种质谱分析技术，如电子轰击谱（ＥＩ／ＭＳ）、场解吸谱（ＦＤ／ＭＳ）、快速原子轰击谱（ＦＡＢ／ＭＳ）、色／质联用等，对高档齿轮油的主剂－含磷极压剂的结构组成进行了较为详尽的分析研究，提出了复酯胺盐的结构组成。     

涂层材料的断裂分析(英文)

和基体厚度相比,涂层很薄,因此细观力学模型可把基体作为半无限弹性体。由于涂层和基体材料的膨胀系数及弹性系数不匹配,涂层材料中残余热应力的解析解为 E_c/(1-γ_c)·(α_s-α_c)△T。用有限元法校核,该应力和解析解吻合得好。通过对涂层产生裂纹驱动力和断裂韧性的讨论,提出了抗裂涂层厚度公式。     

Application of Rachinger''s method to separate overlapped doublets in the X-ray photoelectron spectrum

Rachinger's method of separating ₁ and ₂ doublets in X-ray emission spectra is applied for the first time to separate the superimposed doublets due to spin-orbit coupling. This method has been applied to separate closely lying doublets such as (Ag 4p_3/2and Ag 4p_1/2, (Ni 3p_3/2and Ni 3p_1/2) and (Cu 3p_3/2and Cu 3p_1/2). The intensities ratios of the separated peaks are measured and compared with the ratios obtained from a first-order calculation. An excellent agreement between the measured and calculated ratios are obtained. Residual background intensities compared with the estimated values are found to agree within certain uncertainties.     

Gas diffusion and dielectric studies of polystyrene‐fullerene compositions

Polystyrene‐fullerene compositions containing up to 0.45 mol % (3 wt %) fullerene C₆₀ were investigated. It was established that the addition of fullerene to polystyrene (PS) leads to an increase of molecular packing density and so influences the transport of small molecules through the polymer films. Gas diffusion through films of PS‐fullerene compositions is slower than through PS films, and gas separating properties of compositions are higher. Dielectric studies showed that the fullerene is distributed as clusters in the polymer matrix of solid composition prepared from a toluene solution of PS and fullerene. Heating without air to the temperature higher than PS glass transition leads to increasing relaxation time of α‐transition in PS of compositions containing >0.15 mol % (1 wt %) fullerene. This effect is caused by rather strong interaction of PS chains via fullerene molecules entered into the PS‐fullerene complex. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2946–2951, 2002     

Surface Position-Resolved Thermophysical Properties for Metallic Alloys

Thermophysical properties are collective measures of a material to transport dynamical quantities of physical nature on its surface or through the bulk. As such, the exact nature of couplings between particles in a many-body assembly of building block atoms or molecules sensitively determines their values. The couplings between nearest neighbors are the product of the local elemental composition and the material phase. In this study, thermal cycling of a four-element Wood’s alloy specimen brings out cadmium-rich patches to the top surface of the specimen. An assembly of such patches leads to depth-dependent deviations of elemental composition from that of the bulk. Surface-layer atoms are driven to form a high temperature laser-produced plasma (LPP), and time-resolved spectroscopy of their emissions show the variability of elemental composition over surface positions as well as over depth from the surface. These thermal history-driven composition anomalies contribute to significant variability in the measured values of spectral emissivity and thermal diffusivity.     

An investigation into the occurrence of sewage fungus in rivers containing papermill effluents—IV. Growth in experimental channels dosed with effluents and pure compounds

Wastewaters from the manufacture of pulp and paper have given rise to problems of excessive microbial growth in rivers over a number of years. This paper is the first in a series of four articles describing research undertaken by PIRA at four U.K. paper/board mills (one integrated with pulp production) over the period 1978–1980. This first paper briefly reviews the published literature on sewage fungus growth from pulp and paper mill discharges up to 1978, but mainly describes previously unpublished work undertaken by PIRA over the period 1965–1975. This introductory paper thus provides a state-of-the-art review of methods to control sewage fungus growth from pulp and paper mill effluents prior to commencement of the research described in the following three articles.