轿车铝合金油泵壳体液态挤压工艺

采用液态挤压代替压力铸造及热模锻生产轿车铝合金油泵壳体,不仅克服了压铸件内部容易形成气孔和氧化夹杂的缺陷,而且减少了热模锻的投资及提高了材料利用率。本文介绍了铝合金油泵壳体液态挤压的模具结构及设计参数、技术经济分析。     

重组人EC-SOD包涵体的稀释复性及重折叠后蛋白的纯化

目的确定重组人ECSOD包涵体体外稀释复性和复性后蛋白纯化的适宜方法。方法通过对pH、温度、包涵体蛋白浓度、尿素和精氨酸浓度及氧化还原对比率的定性定量分析,研究重组人ECSOD包涵体体外稀释复性的基本条件。采用金属离子亲和柱(IMAC)和肝素亲和柱(Heparinsepharose)对复性蛋白进行纯化,比较纯化效率的差异。结果最佳复性条件为pH8.5,尿素浓度为1.5molL,精氨酸浓度大于0.3molL,GSH∶GSSG=4∶1;复性温度及包涵体蛋白终浓度越高,复性效率越低。IMAC和Heparinsepharose亲和柱均可用来纯化复性蛋白溶液,但Heparinsepharose纯化效率较高。结论确定了重组人ECSOD包涵体体外稀释复性的最佳条件及复性后蛋白纯化的方法。     

Theoretical Models for Binder Burnout

The kinetics of binder burnout, from a ceramic green body, are considered for the case of an "unzipping" binder which decomposes to produce a volatile monomer. The process is considered to fail if the concentration of monomer in the green body exceeds that in equilibrium with vapor at 1 atm (≅10⁵ Pa), when an internal bubble would be expected to form. Steady-state diffusional calculations and computer simulations explore the size and temperature dependence of the process and are in agreement. The model suggests that it is not feasible to burn out a large flat piece greater than about 3 mm thick, without going to very long times of burnout. The kinetics are significantly improved if porosity develops in the piece during the early stages of decomposition, as opposed to the retreat of the binder into the piece on a uniform front.     

重组人白细胞介素-10在大肠杆菌中的表达及生物学活性分析

目的在大肠杆菌中表达重组人白细胞介素-10(Interleukin-10,IL-10),并检测其生物学活性。方法将IL-10基因重组到质粒pET11c中,转化BL21(DE),提取质粒,经酶切鉴定和测序分析;在25℃用低浓度的IPTG诱导表达,对包涵体IL-10稀释复性;经ELISA检测其含量,MC/9细胞增殖法检测其生物学活性。结果工程菌IL-10/pET11c/BL21诱导表达的目的蛋白以可溶性和包涵体两种形式存在,Westernblot鉴定证实为IL-10蛋白,两种形式的IL-10均具有一定的生物学活性。结论已成功地在大肠杆菌中表达了IL-10,为进一步纯化和制备IL-10的基因工程药物打下了基础。     

50年来辽宁省不同等级舒适日数演变及空间区划分析

根据1964—2015年辽宁省23个气象站点的逐日平均气温、相对湿度及平均风速资料,采用人体舒适度指数法计算人体舒适度指数,在季尺度上分析辽宁省不同等级舒适日数演变情况及典型旅游城市最佳旅游期;运用旋转经验正交函数分解法(REOF),分析人体舒适度指数季尺度空间变化特征,并应用ArcGIS软件进行舒适区域划分。结果表明:①辽宁省多年平均冷不舒适日数呈降低趋势,舒适日数呈增加趋势,热不舒适日数也呈微弱增加趋势;舒适程度夏季＞秋季＞春季＞冬季;②除冬季外5座典型旅游城市均适宜旅游,夏季为最佳旅游期;其中,沈阳、本溪更适宜春季旅游,大连更适宜秋季旅游。③辽宁省四季舒适度变化情况可大致划分为辽西、辽中、辽东三个区域,具体划分情况随季节有相应变化,总体舒适度由辽宁东部向西部逐渐递减。     

The ageing Australian firefighter: an argument for age-based recruitment and fitness standards for urban fire services

Currently, there is no enforcement of physical standards within Australian fire services post-recruitment, possibly leading to inappropriate fitness and body composition. This study evaluated the impacts of ageing on physical standards of Australian firefighters. Seventy-three firefighters from three different 10-year age groups [25–34 years (n = 27), 35–44 years (n = 27), 45–54 years (n = 19)] volunteered for physical testing using dual-energy X-ray analysis and existing fitness tests used for recruitment by an Australian fire service. Older (45–54 years) participants demonstrated significantly poorer physical standards compared with younger participants including cardiovascular fitness (p < 0.05), strength (p = 0.001) and simulated operational power testing tasks (p < 0.001). Age-related body composition changes were also observed independent of body mass index. Minimum recruitment standards and fitness programs need to account for age-related declines in physical capabilities to ensure that the minimum standard is maintained regardless of age.

Practitioner Summary: Using dual-energy X-ray analysis and established fitness testing protocols, this study aimed to gain an appreciation of the current standards of body composition and fitness of Australian firefighters and the effects of ageing on their physical abilities post-recruitment. The study demonstrated a significant decline in physical standards due to age.     

蓄水条件下某水电工程坝址区变形体变形 与稳定性研究

库岸边坡在蓄水后的变形和稳定问题一直是水电工程的主要问题, 尤其是坝址区库岸边坡稳定性对水电工程 的正常运营起着至关重要的控制作用。针对黄河上游某水电站库岸一变形体边坡, 在对该变形体边坡基本特征分 析的基础上, 采用数值计算的手段, 对黄河上游某水电站坝址区变形体在自然及蓄水条件下稳定性进行对比分析。 结果表明: 蓄水后变形体边坡的变形具有明显的分区特征, 且坡体的变形受影响较大。同时, 利用强度折减法对变 形体的稳定性系数进行了计算, 变形体的稳定性较好, 考虑到坡体局部稳定性较差, 可能会产生局部失稳破坏, 因 此, 需采取支护措施保证该处坝址区变形体在运营期间的长期稳定性。     

A novel approach for fit analysis of thermal protective clothing using three-dimensional body scanning

The garment fit played an important role in protective performance, comfort and mobility. The purpose of this study is to quantify the air gap to quantitatively characterize a three-dimensional (3-D) garment fit using a 3-D body scanning technique. A method for processing of scanned data was developed to investigate the air gap size and distribution between the clothing and human body. The mesh model formed from nude and clothed body was aligned, superimposed and sectioned using Rapidform software. The air gap size and distribution over the body surface were analyzed. The total air volume was also calculated. The effects of fabric properties and garment size on air gap distribution were explored. The results indicated that average air gap of the fit clothing was around 25–30 mm and the overall air gap distribution was similar. The air gap was unevenly distributed over the body and it was strongly associated with the body parts, fabric properties and garment size. The research will help understand the overall clothing fit and its association with protection, thermal and movement comfort, and provide guidelines for clothing engineers to improve thermal performance and reduce physiological burden.     

New software developments for quality mesh generation and optimization from biomedical imaging data

In this paper we present a new software toolkit for generating and optimizing surface and volumetric meshes from three-dimensional (3D) biomedical imaging data, targeted at image-based finite element analysis of some biomedical activities in a single material domain. Our toolkit includes a series of geometric processing algorithms including surface re-meshing and quality-guaranteed tetrahedral mesh generation and optimization. All methods described have been encapsulated into a user-friendly graphical interface for easy manipulation and informative visualization of biomedical images and mesh models. Numerous examples are presented to demonstrate the effectiveness and efficiency of the described methods and toolkit.     

基于各向异性滤波和空间FCM的MRI图像分割方法

针对具复杂目标和边界模糊的MRI图像中多感兴趣区域的分割中分割MRI图像软组织难的问题, 提出了一种基于各向异性滤波和空间模糊C-均值聚类(SFCM)的MRI图像分割方法; 用新型各向异性滤波对图像进行预处理, 解决去噪平滑的同时弱化图像细节的问题; 用邻域空间信息设计空间函数, 改进传统FCM的目标函数; 用图像的空间信息实现图像各目标准确分类、有效解决孤立区域的正确归类问题, 进而使分割区域完整; 用直方图拟合曲线初始化分类数和初始聚类中心, 加快算法迭代到最优解, 进而减少运行时间。通过实验证实了各向异性滤波和空间FCM的MRI图像分割方法的综合应用显著提高了分割灰度重叠、目标不连续和目标边界模糊的MRI图像的分割效果。