烧结工艺对硼泥玻璃陶瓷显微结构和性能的影响

以硼泥为主要原料对制备玻璃陶瓷工艺进行研究,实验中发现烧结温度和烧结时间对析晶相的成分影响较小,但玻璃陶瓷的表面形貌影响较大;当烧结温度高于析晶温度时,对晶体尺寸影响更大;根据不同烧结温度和烧结时间对玻璃陶瓷结构影响,找出适合的最佳烧结温度和烧结时间,其值为781℃,时间为4h。     

硼矿制硼酸母液中硼含量的测定方法探讨

报道了笔者用水相直接显色型比色法测定硼酸母液中硼含量的实验和结果。     

Sintering of the Mechanochemically Activated Powders of Hexagonal Boron Nitride

Pressureless sintering of hexagonal boron nitride (BN) was performed using a powder activated by mechano-chemical treatments. Physical properties of the sintered BN bodies depend on the type of starting powder and the conditions of the treatments. The BN body, which was obtained at 2000°C using an appropriate activated powder, was 99 wt% pure and was excellent in mechanical and physical properties, in spite of its low density (1.64 g/cm³).     

Characterization of boron-doped diamond electrodes by electrochemical impedance spectroscopy

Charge transfer on boron doped diamond (BDD) electrodes was studied by cyclic voltammetry and electrochemical impedance spectroscopy. The diamond films of 5 μm thickness and boron content between 200 ppm and 3000 ppm were prepared by the hot filament CVD technique on niobium substrate and mounted in a Teflon holder as rotating disk electrodes. The electrochemical measurements were carried out in aqueous electrolyte solutions of 0.5 M Na₂ SO ₄ + 5 mM K₃[Fe(CN)₆]/K₄[Fe(CN)₆]. Significant deviation in the redox behaviour of BDD and active Pt electrodes was indicated by a shift of the peak potentials in the cyclic voltammograms with increasing sweep rate and lower limiting diffusion current densities under rotating disk conditions. In the impedance spectra an additional capacitive element appeared at high frequencies. The potential and rotation dependence of the impedance spectra can be described quantitatively in terms of a model based on diffusion controlled charge transfer on partially blocked electrode surfaces. Direct evidence for the non-homogeneous current distribution on the diamond surface was obtained by SECM measurements.     

7-羟基-4’-甲基-异黄酮的合成

以对甲基苯乙酸、间苯二酚为原料,经合成脱氧安息香中间体,环合成7-羟基-4'-甲基-异黄酮.在脱氧安息香增碳环合的反应中,探索了3种不同的增碳环合试剂对反应的影响,较理想的环合试剂为BF3·Et2O-DMF-PCl5.该工艺路线条件温和,产率达到72%.     

表面覆盖氮化硼膜的金刚石膜的场发射特性

利用热丝化学气相沉积（HFCVD）方法在Si衬底上生长了4μm厚的金刚石膜,然后利用射频磁控溅射方法在金刚石膜上沉积了100nm厚的六角氮化硼（h—BN）薄膜．在超高真空系统中测试了覆盖氮化硼（BN）薄膜前后金刚石膜的场发射特性,结果表明覆盖BN薄膜后的金刚石膜的场发射特性明显提高,开启电场由14V／μm升到8V／μm．F—N曲线表明,覆盖BN薄膜后的金刚石膜在强电场区域的场增强因子有所降低,这可能归因于场发射点随着电场的增强而改变．     

可加工氮化硅/氮化硼复相陶瓷的制备

以硅(Si)粉、六方氮化硼(h-BN)为原料,在氮气(N2)中用燃烧合成(combustion synthesis,CS)气固反应法,原位生成可加工氮化硅/氮化硼(Si3N4/h-BN)复相陶瓷.考察了h-BN不同体积分数(下同)对Si3N4/h-BN复相陶瓷可加工性的影响.结果表明:在实验条件下,Si粉氮化完全,不存在残余的游离Si.Si3N4/h-BN复相陶瓷中以柱状β-Si3N4为主相,β-Si3N4晶粒之间为针状h-BN相.随着h-BN相含量的增加,Si3N4/h-BN复相陶瓷的可加工性提高,抗弯强度先减小后增加.h-BN含量为25%时,Si3N4/h-BN复相陶瓷的抗弯强度最低.     

新型超硬正交BN同素异形体的第一性原理研究

应用第一性原理计算,提出一种具有正交结构的BN化合物(O-BN),空间群为Pbam.计算结果表明:O-BN具有较强的抗压缩性和较大的体弹模量(397.38 GPa),其理论硬度值可达到65.10 GPa.同时,与先前理论提出的BN同素异形体相比,O-BN的能量更为稳定.理想拉伸强度计算进一步表明O-BN是一种潜在的超硬材料.我们的研究结果为实验上合成BN化合物起到了重要的理论指导作用.     

工业硅炉外吹气精炼除硼研究进展

冶金法太阳能级多晶硅技术具有能耗低、成本低和环境友好等特点,正逐步取代投资大、成本高的化学法而成为全球研究的热点.硼是工业硅中最难去除的非金属杂质之一,本文阐述了工业硅的生产过程和吹气炉外精炼除硼的原理,综述了国内外工业硅炉外氧气、湿氢、湿氧、湿二氧化碳以及吹气-熔渣联合精炼等工艺技术,并对本课题组湿氧精炼除硼的研究进行了重点介绍,分析了吹气精炼过程硅的损失问题,最后指出吹气-熔渣联合法是冶金法炉外精炼的发展方向.     

Effect of B2O3 on the structural and in vitro biological assessment of mesoporous bioactive glass nanospheres

In this paper, the boron-containing mesoporous bioactive glass (MBG) nanospheres have been successfully synthesized by modified sol-gel method assisted by surfactant, and the effect of boron substitution on structure and bioactivity was evaluated by combining experiments and ab initio molecular dynamics (AIMD) simulations. All of the samples exhibit regularly uniform mesoporous spherical microstructure with an average size of about 60 nm, and the boron-containing MBGs show higher specific surface area with the value up to 416.20 m²/g. The simulated body fluid (SBF) immersion test confirms that the deposited hydroxyapatite (HA) evidently increases with the increasing of boron content, indicating that the biological behavior has been significantly improved resulting from incorporation of boron. Additionally, our results also reveal that B₂O₃ substitution has positive impact on cell proliferation of human periodontal ligament cells (hPDLCs) at lower extracted concentration. Furthermore, AIMD simulation is employed to understand the relationship between structural changes and in vitro bioactivity in terms of structural information, especially the boron coordination number. The results illustrate that the boron-containing MBG nanospheres with excellent bioactivity are great potential for biomedical applications.