Premixed metal fibre burners based on a Pd catalyst

As an alternative to previously developed catalytic FeCrAlloy fibre mat burners based on perovskite catalysts, new catalytic burners have been developed based on Pd catalyst on lantana-stabilised Al₂O₃ and different fibre structures (NIT100A, NIT100S and NIT200S by ACOTECH NV). All development steps are considered, shifting from catalyst preparation (based on combustion synthesis of γ-Al₂O₃) to the optimisation of lantana and Pd loadings, from the definitions of the best catalyst-deposition conditions (washcoating) to the catalytic burners performances, determined in an ad hoc developed combustion chamber. The results show almost half pollutants emissions and better performance compared to various non-catalytic counterparts, especially as far as CO and NO_x emissions are concerned. Some flame instability problems were though registered, especially for one of the catalytic burner mattresses employed, at low specific power inputs and excesses of air (<375 kW/m² and <12%, respectively). Further, PdO/Pd transition is shown to influence the dynamic behaviour of the catalytic burners.     

丙酮低压一步法合成甲基异丁基酮催化剂体系研究进展

对丙酮低压一步法合成甲基异丁基酮所需要的催化剂体系及反失活机理进行了详尽的综述，并对近年来的研究工作进行了系统地分析与比较，提出了未来的研究方向。     

Bi3+对纳米MnO2水热合成的影响研究

在中性和酸性条件下，以MnO2作为锰源，通过水热合成了纳米MnO2，通过XRD和TEM对产物进行的观察表明，在酸性条件下，向溶液中添加一定量的Bi^3 ，产物的晶型由α型向γ型转化，产物形貌由针状、丝状向颗粒状转变。     

纤维素酶分子的计算机辅助序列分析

利用生物大分子数据库（EMBL、SWALL和PDB）及软件技术（DNASIS和AntheProt）对嗜热子囊菌（Thermoascus aurantiacus)的产生的一种纤维素酶分子进行了序列分析及结构预测；通过多种来源的纤维素酶的比较研究，分析了其催化区、活性位点及局部保守序列。     

基于知识的服装CAD

本文提出一种基于知识的计算机辅助服装设计系统，该系统运用了人工智能中产生式和框架思想，把服装设计中智能和各种常识和技能进行抽象，把服装按人体部位进行自上而下的分层，从而把一个很复杂的问题转变为简单问题。本文同时提出真实显示服装效果图的数学模型。     

含氨烷基聚硅氧烷的研究进展

对含氨烷基聚硅氧烷的研究进行综述，着重介绍含氨烷基聚硅氧烷的种类，性能特点，制备方法及应用等。     

Kinetic analysis for effect of initial substrate concentration on growth and secondary metabolite production in cultures of Nicotiana tabacum

Suspension cultures of tobacco cells were studied using airlift and rotary-drum bioreactors. The effect of initial concentrations of a major substrate, sucrose, on the growth and production of a secondary metabolite, phenolic compounds, was investigated. The dry weights and total concentrations of the phenolic compounds increased with the initial sucrose concentration in both bioreactors. Both bioreactors were found to have the same tendency for the effect of initial sucrose concentration. The structured model, presented previously was modified by considering that sucrose was hydrolyzed to glucose and fructose by an enzymatic reaction. The previous and the new models were applied to the above two sets of experimental data obtained with two bioreactors, independently. The hydrolysis of sucrose was elucidated to contribute slightly to the overall kinetics of growth and secondary metabolite production in these cultures. Furthermore, the levels of shear damage in each bioreactor were quantitatively compared based on the death rate constant, k_i, which is one of the model constants.     

含氮化合物废气选择性催化氧化技术研究进展

通过对当前含氮化合物废气治理技术的对比分析,总结选择性催化氧化的相关技术优势。根据对含氮化合物的种类及来源分析,介绍氨气、腈类、胺类及其他含氮化合物的催化净化技术。重点总结催化剂的种类、研发进展和在实际使用中可能遇到的问题,同时展望含氮化合物废气选择性催化氧化技术的研发方向。     

Synthesis and Crystal Structure of RE[CH_2(CH_2)_4CONC_4H_9]_3(NO_3)_3(RE=Dy,La)

ＳｙｎｔｈｅｓｉｓａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆＲＥ［ＣＨ２（ＣＨ２）４ＣＯＮＣ４Ｈ９］３（ＮＯ３）３（ＲＥ＝Ｄｙ，Ｌａ）ＷａｎｇＨａｎｚｈａｎｇ（王汉章），ＸｕＱｉｎｇｆｅｎｇ（徐庆锋），ＱｉａｎＰｕ（钱朴）ＳｕｎＪｉａｎｐｉｎｇ（孙建...     

Technique for Producing Mullite and Other Mixed-Oxide Systems

Mixed-oxide systems are of interest in a variety of technical ceramic applications. The key in many systems is to achieve a high degree of homogeneity, approaching the molecular level. A technique for producing mixed oxides via direct oxidation of mixtures of organometallic compounds is discussed as a potential route. Preliminary work performed on producing mullite is discussed.