阳离子型聚丙烯酰胺絮凝剂的开发与应用

阳离子型聚丙烯酰胺具有许多优点，极具开发研究价值，是重要的高分子絮凝剂。介绍了阳离子型聚丙烯酰胺絮凝剂的制备方法，应用及其絮凝作用机理，并分析了其发展方向。     

新型阳离子聚合物NCP的合成及应用

介绍了用高分子反应法在固态条件下合成高阳离子度阳离子聚合物NCP的方法,确定了其最佳反应条件,测定了聚合物阳离子度和反应效率.采用L9（34）正交试验法得出合成NCP的最佳反应条件为：聚合物与阳离子化试剂质量比为11：3;催化剂用量为1.072%,反应时间为2.5 h;反应温度为80℃.实验结果表明,在反应体系中加入催化剂和少量有机或无机溶剂可显著提高反应速率和效率;使用少量润湿剂,可最大限度地限制副反应,造成反应部位的局部浓度高,提高反应效率.阳离子聚合物NCP可作为增粘降滤失剂用于配制正电性钻井液,效果优良,且耐温性能良好,同时基于阳离子与阴离子聚合物在溶液中生成凝胶状沉淀物的特性,NCP还可用于解决注聚区块生产井产出水中含高浓度聚合物的问题.     

多级复合布尔函数性能研究

本文研究了加法复合布尔函数和乘法复合布尔函数,在平衡性、k次项系数、K次扩散准则(PC)、相关免疫 性(CI)、Walsh谱、代数次数、小项分布等方面得到了一批新结果。     

Cationic ring-opening polymerization of hexamethylcyclodisilazane: General aspects and tentative mechanisms

The ring-opening polymerization of hexamethylcyclodisilazane (D_2NMe), initiated by methyl triflate in 1,2-dichloroethane, forms in the first, fast kinetic step both linear polymer and cyclic dimer (D_4NMe). Subsequently a slow depolymerization process occurs leading to exclusively cyclotrisilazane (D_3NMe). On the basis of kinetic measurements carried out using an adiabatic calorimetric technique and complementary experiments, mechanisms of both propagation, cyclization and back-biting reactions are proposed. The influence of the reaction temperature was also studied; it is demonstrated that, at low temperature, polymerization does not lead to cyclic oligomer formation. In such conditions, the polymerization presents a ‘living’ character.     

Maghnite‐H+, a solid catalyst for the cationic polymerization of α‐methylstyrene

The polymerization of α‐methylstyrene (AMS) catalyzed by Maghnite‐H⁺ (Mag‐H) was investigated. Mag‐H is a montmorillonite sheet silicate clay, exchanged with protons. It was found that the cationic polymerization of AMS is initiated by Mag‐H at ambient temperature in bulk and in solution. The effect of the amount of Mag‐H, the temperature, and the solvent was studied. The polymerization rate increased with increase in the temperature and the proportion of catalyst, and it was larger in nonpolar solvents. These results indicated the cationic nature of the polymerization. It may be suggested that the polymerization is initiated by proton addition to monomer from Mag‐H. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

液碱纯度对阴床再生运行情况分析

从理论上分析了液碱对阴树脂再生度的影响。通过两种不同纯度的液碱再生阴树脂的实际运行经济指标统计分析，说明用高纯度液碱再生阴树脂，可提高树脂的工作交换容量和周期制水量，有很好的经济效益。     

在以纯碱为原料的非强酸性水溶液体系中采用酸碱滴定分析的误差来源及分析方法的改进

以三聚磷酸钠生产过程为例,论述了在以纯碱为原料的非强酸性水溶液体系中,由于反应不完全导致反应物中存在少量的碳酸盐,这部分碳酸盐干扰了用酸碱滴定法测量的中和度,并据此提出中和度分析改进方法.由此可以推广到其它以纯碱为原料的非强酸性水溶液体系中.     

K-230B镗床万向护板的设计

介绍了大型机床地坑移动盖板的一般设计思想,根据机床原有功能和结构特点,设计兼顾防尘防屑和美观大方两大特点的活动盖板,为同类设计提供一些参考。     

高砂比压裂技术研究

应用由美国ＮＳＩ公司引进的“ｓｔｉｍｐｌａｎ”拟三维压裂设计软件，对影响裂缝内支撑剂铺置浓度的诸因素进行了灰色关联度分析，从中找出了主要的影响因素。并以高砂比压裂的技术指标为依据，研究了在目前压裂工艺水平下，进行高砂比压裂所必须遵循的原则。文中还对国内的高砂比压裂进行了实例分析，进一步论证了文中的观点。     

Photoinitiated cationic polymerization using a novel phenacyl anilinium salt

A novel phenacyl anilinium salt, N-phenacyl, N,N-dimethylanilinium hexafluoroantimonate, (PDA), has been synthesized and used as photoinitiator for cationic polymerization of cyclohexene oxide (CHO), butyl vinyl ether (BVE) and N-vinyl carbazol (NVC). Plausible mechanism of the photoinitiation involves the decay of the excited PDA with both heterolytic and homolytic cleavages of carbon-nitrogen bond. Thus, phenacylium cations formed directly or subsequent intermolecular electron transfer, respectively, initiate the polymerization.