碱处理棉纤维结构及其在LiCi/DMAc中的溶解特性

采用NaOH溶液对棉纤维进行处理.通过X射线衍射研究了不同碱处理条件下棉纤维的晶面结构变化,表征了棉纤维的结晶度和晶粒尺寸.考察了碱处理棉纤维在LiCl/DMAc中的溶解性和溶解稳定性.结果表明碱处理后,棉纤维的晶面结构明显变化,棉纤维衍射峰发生明显的变化,结晶度和晶粒尺寸也有变化,且随碱的质量分数的变化非常明显,而处...     

酵母多基因表达载体在纤维素生物转化中应用

构建含酿酒酵母组成型强启动子PGK、G418抗性基因及rDNA片段的整合型载体pScIKP,利用rDNA多个同源重组位点,将外源基因以多拷贝整合到酵母染色体上,无需诱导即可持续表达;利用载体位于表达盒两端同尾酶,可插入多个基因表达盒,实现多基因稳定共表达.为检验共表达情况,反转录从绿色木霉中获得纤维素酶基因eg3和cbh2, 克隆并转化获得重组酵母菌株S.cerevisiae-ec. 该重组酵母能降解羧甲基纤维素形成水解圈;用羧甲基纤维素还原糖法和滤纸酶活力法测定酶活力,其最适温度和最适pH值与所表达单酶相似,表明共表达未影响两种酶的生物学特性;且双酶具有协同作用,能更有效降解非结晶纤维素.pScIKP载体能成功用于多个外源基因共表达和产物协同作用的研究,为构建能直接降解纤维素的酿酒酵母菌株,实现纤维素可再生能源的生物利用奠定了基础.     

Study on volume ratio and plasticizer screening of free coating membranes composed of ethyl cellulose and chitosan

The aim of this study was to optimize the formula of free blended coating membrane of ethyl cellulose (EC) and chitosan (CS), including their suitable ratio range and the best plasticizer used. The dry films were produced by a casting/solvent evaporation method, with different volume ratio of EC and CS solution plasticized by various plasticizers, respectively. The wet films were prepared by immersing dry films in pH 6.8 phosphate buffer saline (PBS) for 24 h. The promising ratio range of EC/CS was below 20/5 or 20/6 with various plasticizer, which was determined by comparing the viscosity of the blended solutions and the morphology of the blended films. The efficiency of plasticization was evaluated by measuring glass transition temperature (T_g). All the testing plasticizers have good compatibility with EC or CS and dibutyl phthalate (DBP) have the strongest efficiency inducing the lowest T_g (39.9°C) of the film. Mechanical properties were evaluated by the ratio of tensile strength (T) to elastic modulus (E). In the wet state, the films with DBP had the highest T/E value (1.2). The results of leaching of plasticizers also verified that DBP was the most stable plasticizer in the films. The release rates of tetramethylpyrazine phosphate (TMPP) through the pellets coated with the blended films of EC/CS (20 : 6 v/v) plasticized by various plasticizers showed that the more water‐soluble the plasticizer was, the more quickly TMPP dissolved from the coated pellets, which further indicated that the water‐insoluble plasticizers (such as DBP) could be more applicable to keep the sustained or controlled release property of the blended films in wet state. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1932–1939, 2006     

Study of the influence of reaction conditions on the degree of substitution,intrinsic viscosity,and yield of oxidized cellulose acetate by factorial experimental design

A half‐fraction, two‐level, four‐factor factorial experimental design was used to study the effects of the acetic anhydride concentration, reaction temperature, reaction time, and sulfuric acid concentration on the degree of substitution, intrinsic viscosity, and yield of oxidized cellulose acetate (OCA). Oxidized cellulose containing 20% (w/w) carboxylic acid was used as the starting material. The data were fitted by multiple regression analysis with SAS software. The correlation coefficients obtained from plots of the predicted and observed values for the degree of substitution, intrinsic viscosity, and yield were 0.985, 0.993, and 0.991, respectively. Residual normal plots of the regression models showed a linear relationship. Lenth and main‐factor‐effect plots revealed an increase in the degree of substitution of OCA with an increasing concentration of acetic anhydride. The latter had no effect on the intrinsic viscosity and yield of OCA. An increase in the reaction temperature led to an increase in the degree of substitution and a decrease in the intrinsic viscosity and yield of OCA. The influence of the reaction time on the degree of substitution and intrinsic viscosity followed a trend similar to that observed with the reaction temperature, but the yield of OCA was unaffected. Increasing the concentration of sulfuric acid reduced the degree of substitution, intrinsic viscosity, and yield of OCA. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 696–705, 2005     

聚合度对纤维素表面性能的影响

根据Washburn浸渍理论和van Oss-Good-Chaudhury组合理论及应用柱状灯芯技术测试了具有不同聚合度(DP)的纤维素的表面性能,同时与已报道的纤维素的表面能进行了比较。结果表明:纤维素的表面能随分子量的增加而增大,但主要是其Lifshitz-van der Waals力在起主导作用。研究还发现纤维素的表面能γS与聚合度DP之间的关系大致可以描述为:γS=37.56+0.02 DP,而纤维素的极性率P与聚合度DP之间的关系则是一种非线性关系,如:P=11.88-0.02 DP+9.10 DP2。     

海藻酸钠与纳米晶纤维素共混膜制备与性能研究

借助冷冻干燥技术制备了海藻酸钠与纳米晶纤维素共混膜以达到增强目的;探讨了不同含量的纳米晶纤维素与海藻酸钠共混膜的微观形貌、力学性能、吸水性能及孔隙率的变化;综合评价确定最佳的纳米晶纤维素含量在0.75%至1.00%之间。     

多元醇胺对钢铁渣粉溶解特性的影响

为了解决钢铁渣粉溶解性差所引起的活性低的问题,研究了三乙醇胺( TEA)、三异丙醇胺( TIPA)和二乙醇单异丙醇胺( DEIPA)对钢铁渣粉在碱性环境下溶解的影响规律,通过电导率仪、酸度计、电感耦合等离子体原子发射光谱仪( inductively coupled plasma atomic emission spectroscopy,ICP-AES)和八通道微量热仪对钢铁渣粉的溶解特性进行了表征。结果表明：多元醇胺降低了钢铁渣粉液相的pH并提高了液相电导率,主要表现为增加了液相中Fe、Ca、Al元素的质量浓度,其中TEA和DEIPA的影响效果大于TIPA;多元醇胺提高了钢铁渣粉早期的溶解热和最大水化热峰值,进一步证实了多元醇胺对钢铁渣粉具有增溶作用。     

Dissolution mechanism and solubility of hemimorphite in NH3-(NH4)2SO4-H2O system at 298.15 K简

The dissolution mechanism of hemimorphite in NH3-（NH4）2SO4-H2O system at 298.15 K was investigated by X-ray powder diffraction （XRD）, scanning electron microscopy （SEM）, Fourier transform infrared spectroscopy （FTIR） and X-ray photoelectron spectroscopy （XPS） analysis. The results show that hemimorphite is soluble in NH3-（NH4）2SO4-H2O system and its residue exists in the form of an amorphous SiO2 layer on the hemimorphite surface. The XPS data also indicate that the Si 2p3/2 and O ls spectra of the hemimorphite are broadened and shift to higher binding energies and their binding energies are closer to silica with an increase of total ammonia and time. Solubility of hemimorphite in NH3-（NH4）2SO4-H2O system was measured by means of isothermal solution method at 298.15 K based on the study of the dissolution mechanism of hemimorphite. The results show that the solubility of zinc in solution increases firstly and then decreases with the increase of cr（NH3） （total ammonia concentration） at different NH3/NH4^＋ ratios. The solubility of silicon in solution decreases from 0.0334 mol/kg in ct（NH3）-4.1245 mol/kg NH3-（NH4）2SO4-H2O solution to 0.0046 mol/kg in cT（NH3）=7.6035 mol/kg NH3-（NH4）2SO4-H2O solution.     

Effects of Al and Sn on electrochemical properties of Mg-6%Al-1%Sn （mass fraction） magnesium alloy as anode in 3.5%NaCl solution

Mg-6%Al-1%Sn（mass fraction） alloy is a newly developed anode material for seawater activated batteries. The electrochemical properties of Mg-1%Sn, Mg-6%Al and Mg-6%Al-1%Sn alloys are measured by galvanostatic and potentiodynamic tests. Scanning electron microscopy（SEM） with energy dispersive spectrometry（EDS） is used to characterize the microstructures of the experimental alloys. The results show that the Mg-6%Al-1%Sn alloy obtains more negative discharge potential（-1.38 V（vs SCE）） in hot-rolled condition. This is attributed to the fine dynamically recrystallized grains during the hot rolling process. After the experimental alloys are annealed at 473 K for 1 h, the discharge potentials of Mg-6%Al-1%Sn alloy are more negative than those of Mg-6%Al alloy under different current densities. After annealing at 673 K, the discharge potentials of Mg-6%Al-1%Sn alloy become more positive than those of Mg-6%Al alloy. Such phenomenon is due to the coarse grains and the second phase Mg2 Sn. The discharge potentials of Mg-1%Sn shift positively obviously in the discharge process compared with Mg-6%Al-1%Sn alloy. This is due to the corrosion products pasting on the discharge surface, which leads to anode polarization.     

氯化锂对纤维素/离子液体浓溶液纺丝的影响

以离子液体1-烯丙基-3-甲基咪唑氯盐（[AMIM]Cl）为溶剂、氯化锂（LiCl）为添加剂,通过测定纤维素溶液的流变性能来考察LiCl对纤维素/[AMIM]Cl溶液纺丝性能的影响,发现纤维素/[AMIM]Cl/LiCl呈现切力变稀行为,当LiCl添加量为[AMIM]Cl质量的3%时,切力变稀行为最明显.使用双螺杆挤出机通过干湿法纺丝制备出了高浓度的纤维素纤维,通过XRD、偏光显微镜、SEM及单纤强力仪等表征了纤维的结构与性能,结果表明随着LiCl含量的增加,所得纤维的结晶度和双折射率增加,结构致密,纤维强度增加,当LiCl含量达3%时,纤维强度可达3.13 cN/dtex.