从茶具材质发展谈产品设计专业的材料教学

现今的产品设计材料教学,很大程度上仅仅局限在对材料本身的讲授,而没有把材料置于设计中,将材料的设计表现意义传达出来,这种对材料片面性的理解势必影响学生在设计中对材料的充分使用。本文就以茶具为例,透过茶具材质的发展来探讨材料对于设计的深层意义,并且提出在产品设计的材料教学中,应该在设计的大前提之下对材料知识进行全面的讲授与科学的分析。     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

茶生物质/聚丙烯复合材料的制备与性能研究

为高值化利用茶产业剩余物资源,以废弃茶生物质(Tea biomass,TB)为填料,聚丙烯(Polypropylene,PP)为基体,采用密炼-注塑工艺制备了TB/PP复合材料,考察了茶生物质填料种类、处理方式及其添加量对复合材料结构、形态及性能的影响。实验结果显示,以茶树枝为生物质填料制备的复合材料力学性能最佳,茶梗次之,茶叶最差;茶梗填料经水煮和马来酸酐接枝聚丙烯增容处理后,复合材料的拉伸强度、弯曲强度、拉伸模量及弯曲模量分别提高了23.4%、9.0%、16.9%和13.9%。SEM图片显示茶梗填料与基体界面相容性提高。随茶梗填料用量的增加,复合材料的拉伸模量、弯曲模量逐渐增大,而拉伸强度及断裂伸长率缓慢下降,吸水率增加,热性能得到改善。当TS添加量为30%(质量分数)时,复合材料的拉伸强度比PP减小7.3%,但弯曲强度、弯曲模量及拉伸模量则分别提高11%、86.1%和54.7%。浸水80h后吸水率为0.89%。     

茶末/CMC-Na/AL-Na复合膜制备及性能测定

目的 为改善传统保鲜膜带来的环境污染问题,开发出具有较好力学性能和抗菌性的食品包装材料提供理论依据。方法 采用海藻酸钠(AL-Na)和羧甲基纤维素钠(CMC-Na)为主要成膜材料,辅助添加茶末通过流延成膜法制备复合膜,以拉伸强度、断裂伸长率等为依据,通过单因素和响应面试验确定茶末/CMC-Na/AL-Na复合膜的最佳工艺。结果 当CMC-Na与AL-Na的体积比为84∶16、茶末添加量为1.43%、干燥温度为50 ℃、干燥时间为7 h时,复合膜综合性能最优,拉伸强度为16.60 N/mm²,断裂伸长率为19.11%,具有较好的力学性能、耐水性、抗氧化性和抑菌性。结论 制备的茶末/ CMC-Na/AL-Na复合膜具有较好的力学性能和抗氧抑菌性能。     

几何形态在现代家具设计中的应用

几何形态家具是现代居室的一部分,它是无风格的,因为它除了用途和必要的结构外,并不期望表达任何特定的风格,所有的组成部分都是用同样的标准化的基本部分构成,这些部分随时都可以分开或转换。正是这种特性使几何化的造型设计手法应用水到渠成,以几何形为基本单位,通过加、减、换、改等设计方法,创造出多种的造型,并成就着若干的设计可能性。     

Discrimination of green tea quality using the electronic nose technique and the human panel test, comparison of linear and nonlinear classification tools

Electronic nose (E-nose) technique was attempted to discriminate green tea quality instead of human panel test in this work. Four grades of green tea, which were classified by the human panel test, were attempted in the experiment. First, the E-nose system with eight metal oxide semiconductors gas sensors array was developed for data acquisition; then, the characteristic variables were extracted from the responses of the sensors; next, the principal components (PCs), as the input of the discrimination model, were extracted by principal component analysis (PCA); finally, three different linear or nonlinear classification tools, which were K-nearest neighbors (KNN), artificial neural network (ANN) and support vector machine (SVM), were compared in developing the discrimination model. The number of PCs and other model parameters were optimized by cross-validation. Experimental results showed that the performance of SVM model was superior to other models. The optimum SVM model was achieved when 4 PCs were included. The back discrimination rate was equal to 100% in the training set, and predictive discrimination rate was equal to 95% in the prediction set, respectively. The overall results demonstrated that E-nose technique with SVM classification tool could be successfully used in discrimination of green tea's quality, and SVM algorithm shows its superiority in solution to classification of green tea's quality using E-nose data.     

薄层层析-紫外分光光度法测定银杏茶中银杏酸含量

采用薄层层析一紫外分光光度法建立了一种银杏茶中银杏酸快速检测的方法．采用正己烷索氏提取银杏茶中的银杏酸;以硅胶G为固定相,石油醚;乙酸乙酯：冰醋酸（18：1：1）为展开剂对银杏酸进行分离纯化;紫外分光光度法测定,波长为307nm．结果表明：该方法测定银杏酸含量的线性关系良好,线性范围为0．009-0．093mg／mL（R^2=0．9997）,精密度RSD为2．15％,平均回收率为100．90％,测定结果同HPLC法结果对照无明显差异,适用于银杏茶中银杏酸含量的测定．     

响应面法优化油茶粕中茶皂素提取工艺

采用单因素实验结合响应面法,优化了从油茶粕中提取茶皂素的工艺参数。单因素实验最佳条件：乙醇体积分数为70%、提取时间为3 h、提取温度为70℃、料液比为1∶4。在单因素的基础上,选取乙醇体积分数、提取时间、料液比为影响因子,以茶皂素提取得率作为响应值,进行3因素3水平响应面分析。结果表明：茶皂素最佳提取条件是乙醇体积分数为72%、提取时间为3.8 h、提取温度为70℃、料液比为1∶4.5,提取得率预测值为14.54%,验证实测值为14.22%,与预测值相对误差为2.20%。     

论青海藏族茶文化

青海藏族地区特殊的生存环境和饮食结构,决定了茶在人们饮食生活上的重要地位.青海藏族在烹茶、饮茶以及茶具上都具有鲜明的民族特征,并与藏传佛教的发展、宗教活动密切相关,构成了雪域民族丰富多彩的茶文化.     

气相色谱法测定茶多酚中的氯仿和乙酸乙酯残留

以正已烷为萃取剂,对茶多酚(TP)水溶液进行萃取,用气相色谱法分析了TP溶液中的残迹物氯仿和乙酸乙酯。色谱柱为2m×3mmi.d.不锈钢填充柱,固定相为10%的PEG20M,载体为ChromosorbW/WA。氯仿和乙酸乙酯的回收率分别为96.7%～104.3%和98.5%～103.6%;相对标准偏差分别为3.5%和1.7%;最低检测限分别为0.50ug/和0.36ug/g。