鄂钢140 t/h干熄焦技术特点及改进

鄂钢140 t/h干熄焦秉承国产化干熄焦技术优点,同时具有多项技术创新,并对工艺和设备进行技术改进和完善。生产稳定,效益明显。     

CARR水平孔道的设计特点

介绍了中国先进研究堆(CARR)水平孔道的用途、在堆本体的布置、水平孔道结构设计及设计方面的特点。     

Chromatic luminance,colorimetric purity,and optimal aperture‐color stimuli

Chromatic luminance (i.e., luminance of a monochromatic color) is the source of all luminance, since achromatic luminance arises only from mixing colors and their chromatic luminances. The ratio of chromatic luminance to total luminance (i.e., chromatic plus achromatic luminance) is known as colorimetric purity, and its measurement has long been problematic for nonspectral hues. Colorimetric purity (p_c) is a luminance metric in contrast to excitation purity, which is a chromaticity‐diagram metric approximating saturation. The CIE definition of p_c contains a fallacy. CIE defines maximum (1.0) p_c for spectral stimuli as monochromatic (i.e., optimal) stimuli, and as the line between spectrum ends for nonspectrals. However, this line has <0.003 lm/W according to CIE colorimetric data and is therefore effectively invisible. It only represents the limit of theoretically attainable colors, and is of no practical use in color reproduction or color appearance. Required is a locus giving optimal rather than invisible nonspectral stimuli. The problem is partly semantic. CIE wisely adopted the term colorimetric purity, rather than the original spectral luminance purity, to permit an equivalent metric for spectrals and nonspectrals, but the parameter of equivalence was never clear. Since 1 p_c denotes optimal aperture‐color stimuli for spectrals, arguably 1 p_c should denote optimal stimuli consistently for all stimuli. The problem reduces to calculating optimal aperture‐color stimuli (“optimal” in energy efficiency in color‐matching) for nonspectrals, shown to comprise 442 + 613 nm in all CIE illuminants. This remedy merely requires redefinition of 1 p_c for nonspectrals as the line 442–613 nm, and gives meaningful p_c values over the hue cycle allowing new research of chromatic luminance relations with color appearance. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 469–476, 2007     

工程结构动态特性智能优化设计研究

本文针对在传统结构优化设计中，优化过程复杂和费时的问题，采用神经网络的智能算法对结构进行动态优化设计，并给出了具体的设计方法。以门座起重机筒型支柱结构为例，应用此方法对其进行了动态优化设计计算，从而证明了该算法的有效性。     

内热式液态合金离子源

本文介绍了一种实用的液态合金离子源结构，我们利用本结构研制成功了Ａｕ－Ｓｉ和Ａｕ－Ｓｉ－Ｂｅ液态合金离子源，测出了它们的发射特性。     

QFD质量职能扩展简介

介绍ＱＦＤ（质量职能扩展）的发展历史及其具体的操作过程。     

大型立式玻璃磨边机整机动态特性分析

大型立式玻璃磨边机的动态特性影响玻璃磨边质量和磨边效率。利用Solidworks软件建立某大型立式玻璃磨边机三维实体模型,导入ANSYS软件中,对整机结构有限元动力学分析,得到该磨边机前六阶模态参数,分析了各阶振型对磨边机动态特性的影响,为磨边机结构的改进设计提供了理论依据。     

冲击荷载作用下热处理花岗岩动态力学特性研究

为研究冲击速度和热处理温度对黑云母花岗岩动态力学特性的影响,利用改进的霍普金森压杆系统对25~800 ℃共9个温度等级的热处理试样分别进行3种弹速下的冲击压缩试验。试验结果表明：随着冲击速度的增加,25~700 ℃热处理试样的应力—应变曲线由“Ⅱ型”转变为“Ⅰ型”,而800 ℃热处理试样均表现出“Ⅰ型”应力—应变曲线特征。同一温度热处理下试块的峰值应力、应变和平均应变均随动荷载的升高而增大。相同的冲击速度下,300 ℃热处理试样的动力学性能有所改善,500 ℃后试样的动力学性能开始逐渐劣化。同一温度热处理试样的破碎程度随冲击速度的增加而增加;相同冲击速度下,热处理试样的破碎程度随温度的升高先减弱后增强。     

Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM)

The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

Practitioner Summary: Previous studies have not given much consideration to age-related health and associated abilities when examining acceptance of technology by the ageing population. By encompassing conventional technology acceptance constructs together with age-related health and ability characteristics, the present study was able to identify more factors affecting gerontechnology acceptance by older Hong Kong Chinese.