变形镜交连值的优化分析

关于优化光波控制,自适应光学校正是至关重要的一个环节,可用于改善激光光束质量及校正光束在传输过程中气流引起的波前畸变等。变形镜是其核心器件,而交连值是影响变形镜校正精度的关键因素。针对变形镜实际使用时需要对致动器进行一定的约束,利用带约束的最小二乘法,分析了在一定约束条件下交连值变化对变形镜校正精度及控制稳定性的影响。以Zernike像差和以大气湍流模型构造的像差为校正对象,寻找校正效果最好的交连值。结果表明各阶Zernike像差对应的最优交连值差异较大,最优交连值主要分布在15%～35%之间。从控制误差引起的校正效果变化的方面考虑,对正方形致动器排布的最优交连值位于15%～25%区域。     

Changes in seebeck coefficient of Pt and Pt 10% Rh after use to 1700°C in High-purity polycrystalline alumina

A technique is presented that enables the effects of temperature on the Seebeck coefficient to be assessed for individual wires. The technique, involving a high-resolution thermoelectric scanning rig and a nonuniform conditioning furnace of known temperature profile, was applied to 0.5-mm-diameter wires of Pt and Pt 10% Rh. Changes were observed in Seebeck coefficient when these wires were used in high-purity twin-bore insulation for up to 200 h at temperatures over the range 500 to 1700°C. Contamination from the insulation was found to be transmitted by a vaporization process, having an activation energy of 3 eV. This caused changes of up to 0.14 V · °C^–1 in Pt and 0.01 V · °C^–1 in Pt 10% Rh. Rhodium transfer to the pure Pt wire changed its Seebeck coefficient by up to 5 V · °C^–1. The consequences of both processes for thermocouple pyrometry are presented.     

Thermal accommodation coefficient of gases on controlled solid surfaces: Argon-tungsten system

The knowledge of the thermal accommodation coefficient for gases on well-controlled surfaces as a function of temperature is imperative to understanding the mechanism of interphase heat transfer on the microscopic level. With this goal in view, a heat transfer column instrument is designed, fabricated, assembled, and tested for the specific case a argon—tungsten system. With 99.9999%, pure argon, six sets of data are taken in the rarefied gas region in the maximum temperature range of 500–1500 K. Four sets of these measurements are in the temperature-jump region and are analyzed by the constant-power method to compute the thermal accommodation coefficient of argon on a controlled tungsten surface. The other two sets are taken under free-molecular flow conditions and are interpreted in accordance with the man-free-path kinetic theory for the low-pressure regime. These data are compared and discussed in the context of reported data in the literature and interpreted in the light of the surface condition and finish of the tungsten wire.Nomenclature A area of the solid surface - C _j constants in Eq. (3); j=0, 1, 2, 3, and 4 - E _i incident energy flux - E _r reflected energy flux - E _s reflected energy flux when the interaction between the gas and the solid atoms is complete - g temperature-jump distance - L half-length of the metal wire - M molecular weight of the gas - P gas pressure - Q _H total thermal energy conducted by the gas per unit time from the hot surface - Q_KT total thermal energy conducted by the gas per unit time if the striking gas molecules were to attain thermal equilibrium with the hot surface - R molar gas constant - r radial coordinate - r _f radius of the hot wire - S sticking coefficient - S_o initial sticking coefficient - T temperature - T _e linearly extrapolated gas temperature on the hot-wire surface - T _g temperature of the impinging gas molecules - T _H temperature of the hot surface - T _i temperature of the incident gas stream - T _r temperature of the gas molecules receding after collision with the solid surface - T _s temperature of the solid surface Greek Symbols thermal accommodation coefficient for the gas—solid surface - resistivity of the metal wire - gas coverage on the solid surface For an explanation of symbols, see Nomenclature.     

人群头发元素分布及某些特征研究

本文介绍用堆中子活化分析法测定人群头发中I、Br、Mg、Mn、Cu、Na、V、Cl、Al、Ca、S等11种元素。研究人发中元素分布特征、相关性特征、性别年令分布特征。方法学中还从法庭科学应用角度介绍同一性识别中差异率和重合几率的双判据方法。     

Diffusion of additives and plasticizers in poly(vinyl chloride): 4. A programmed temperature technique for the determination of the diffusion parameters of three dialkylphthalates

A programmed temperature technique has been developed for the measurement of the self-diffusion coefficients of additives in polymers. This has been applied to the diffusion of three dialkylphthalate plasticizers in poly(vinyl chloride). Values of the self-diffusion coefficients and the calculated activation energies obtained in this way have been compared with values previously obtained from measurements at constant temperature. It has been shown that the programmed temperature technique gives a very rapid method for the estimation of the activation energy of self-diffusion.     

The role of the surface free energy in the selection of a suitable excipient in the course of a wet-granulation method

Pellets containing metronidazole were produced in a centrifugal granulator, with hydroxypropylcellulose (Klucel LF®) as binding agent, and corn starch, microcrystalline cellulose (Vivapur 101®) and lactose as excipients. The wettability of the pharmaceutical powders was assessed by means of contact angle measurements, and the dispersive and polar surface energies were determined. The spreading coefficients, the work of adhesion and the work of cohesion were calculated and correlated with the pellet properties (friability, bulk and tapped density, and porosity). The aim was to investigate the role of the surface free energy of one- and two-component powder compositions in pellet production. The interactions between the particles were found to be connected with the measured pellet parameters. It was concluded that, in the course of the growth of the pellets, the particle sizes of the pharmaceutical powders and the interactions between them are important. If the work of cohesion of the binder is lower than the work of cohesion of the substrate and the work of adhesion, then the optimal amount of the binding agent is that which coats the particles uniformly in minimal quantity and in continuous layer.     

森林植被改善对鄱阳湖流域径流和输沙过程的影响

以河流基流为切入点,研究流域植被调节径流、水土保持等微观作用影响大中型河流湖泊径流过程和水沙过程宏观效应的机理。鄱阳湖流域60年来天然降水没有发生趋势性变化。流域森林覆盖率由34.73%上升到63.00%,植被质量改善,赣江等入湖河流基流增加83 m~3/s,河流输沙量减少。2000年以后和2000年以前相比较,枯水期降水径流系数增大,年流量过程平坦化,一定程度上减小洪灾风险,有利于水资源利用和生态环境保护。2001年以后进入鄱阳湖泥沙平均每年减少1 007×10~4t;出湖泥沙增加314×10~4t。因此,鄱阳湖入江水道由淤积转变为冲刷,但出湖流量过程没有趋势性变化。     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

Delay time compensation based on coefficient of restitution for collision hybrid motion simulator

A hybrid motion simulator embeds a hardware experiment in a numerical simulation loop. However, it is often subjected to the inherent problem of an energy increase in the collision of two pieces of hardware in a loop because of the delay time. This paper proposes a delay time compensation method based on contact dynamics model for a collision hybrid motion simulator under delay time and establishes a compensation method for coupled translational and rotational motion. The model developed in this paper describes linear uniform motion of a floating object during the period of the delay time until the force and torque are observed and non-linear motion according to environmental stiffness after the initial delay time period in contact. By using the above model, compensation parameters are designed based on desired coefficient of restitution with iterative calculation. The proposed method achieves accurate delay time compensation and simultaneously realizes a variable desired coefficient of restitution over a wide range of frequencies. Furthermore, the compensation method for multi-dimensional motion is established under the assumption that the friction effect is very small. The efficiency of the proposed method is verified through collision experiments for the coupled motion in two dimensions.