10000m^3天然气球罐用WEL—TEN610CF钢焊接冷裂纹敏感性

WEL-TEN610CF钢是日本新日铁公司生产的低裂纹敏感性高强钢,结合我国首台国产化10 000 m3天然气球罐用37 mm厚WEL-TEN610CF钢焊接性试验研究,对该钢焊接冷裂纹敏感性进行了综合评定,为其焊接工艺的制订提供了可靠的依据。     

Carbohydrate content of potato (Solanum tuberosum L.) tubers treated with Isopropyl-N (3-chlorophenyl) carbamate under different storage conditions

Post harvest application of Isopropyl-N (3-chlorophenyl) carbamate considerably reduced the degradation of starch when potato tubers were stored in an evaporative cooling chamber. The starch degraded at a faster rate when tubers were kept under refrigerated and room storage conditions.     

河南油田提高难采储量动用程度的做法

河南油田主力开发区已进入高含水开发后期,后备资源接替严重不足成为制约油田发展的瓶颈。“九五”期间,河南油田加大了难采储量评价和动用的工作力度,按照“整体研究、系统解剖、优选目标、重点突破、滚动发展”的工作思路,对目标区进行综合地质研究,同时运用简易开发、大斜度定向井、稠油冷采等多种开采方式动用难采储量,使资源利用程度逐年提高。“九五”期间共系统开发难采储量437×104t,增加可采储量63.3×104t,建成原油生产能力6.6×104t。文中以张店、新庄油田为重点,探讨了提高难采储量动用程度的途径。     

新型压滤机液压控制系统的研制

 针对压滤机的工艺要求，在对新型压滤机液压控制系统研究设计的基础上，利用功率键合图方法建立了压滤机液压系统数学模型，并运用Matlab语言进行动态特性仿真．在压滤机现场实际运用表明该系统性能达到了预期目标，为压滤机液压系统优化设计提供了依据．     

Metallurgical failure analysis of cold cracking in a structural steel weldment: Revisiting a classic failure mechanism

Cold cracking of structural steel weldments is a well-characterized, well-documented, and well-understood failure mechanism. Extensive effort has been put forth to recognize the welding and materials selection parameters that are conducive to cold cracking; however, these engineering efforts have not fully eliminated the occurrence of such failures. This article describes cold cracking failure specifically related to the construction industry. This particular failure was successfully identified prior to final erection of the structural member, and the weld was successfully reworked. These actions potentially prevented a serious catastrophic event that could have occurred have occurred either later in the construction process or possibly during the use of the building. Individual welding parameters, such as electrode/wire selection, joint design, and pre/postheating, played a role in the failure, and a number of human factors relating to the actual fabrication practices also contributed to the failure process.     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

小型全内腔脉冲Ar~＋激光管的研制

介绍一种小型全内腔脉冲Ａｒ＋激光管的设计和结构。并对不同阴极，放电管直径，激励电压及Ａｒ气压等对输出功率及激光管寿命的影响作了一系列的实验，试制出结构简单，使用方便，价格便宜的有一定实用价值的小型全内脏脉冲Ａｒ＋激光管。     

全新冷却方式双椭圆泵浦腔的实验研究

报导一种全新冷却方式的双椭圆泵浦腔，具有较高的泵浦效率和光学均匀性。１．０６μｍ调Ｑ脉冲输出能量总转换效率η＞０．７５％     

交流变频调速技术在二辊轧机压下系统中的应用

介绍一种采用变频调速技术控制的二辊轧机压下系统。该系统可控制轧机压下系统的速度在工艺要求的范围内无级可调，压下量以数字动态显示，控制准确、操作方便。文中对系统的组成及工作原理作了较详细的介绍。     

加氢裂化反应器新型冷氢箱的研究与工程设计

报道了加氢加化反应器新型旋流式冷氢箱的研究设计及实用效果，催化剂床层径向温差不大于5℃。