Two dimensional deformation characteristics of bloom CC with liquid core reduction

A two-dimensional model was applied to simulate the liquid core reduction(LCR) technology of bloom CC using ANSYS software.The deformation characteristics of bloom under different liquid fraction and reducing amount are obtained.The results indicate that the main deformation condition of bloom shell is compressive strain,mainly undertaken by the liquid core,which increases with the enhancement of reducing amount.Solidified shell takes minor deformation.The longitudinal section of bloom appears sunken and the narrow side bulges,which grow serious when the liquid fractionincreases.     

光外差系统噪声等效功率的一种测量方法

本文介绍了利用工作于Bragg衍射的Ge晶体声光调制器作为外差系统中的频移器来测量外差系统的噪声等效功率(NEP)的方法。该方法具有测试系统简单、信号光功率、偏频可调的优点。实验测试与理论分析吻合。     

场发射显示器件中真空获得和维持工艺的改进

真空的获得和维持是目前FED研究工作中存在的主要困难之一。本文研究了在现有的传统封接排气以及消气工艺的实验条件下 ,进行了多种工艺改进 :设计了一种新型的三层FED器件结构 ,在这种结构中 ,实现了蒸散型消气剂和非蒸散型消气剂的共同使用 ;并采用了气体保护 ,以及电子轰击去气等有效措施 ,实现了FED器件内部持久的高真空度 ,为FED阴极高稳定、长寿命工作提供了有力的保障     

Multi-grid domain decomposition approach for solution of Navier–Stokes equations in primitive variable form

A new multi-grid (two-grid) pseudospectral element method has been carried out for solution of incompressible flow in terms of primitive variable formulation. The main objective of the proposed method is to apply the multi-grid technique solving the incompressible flow problems associated with three commonly encountered multi-grid environments. In domain decomposition terminology, it includes (I) partially overlapped subdomains, each of which has same types of grids; (II) partially overlapped subdomains, each of which has different types of grids; (III) local adaptive subdomains fully overlapped with the original computational domain (composite grids). The approach for flow problems, complex geometry or not, is to first divide the computational domain into a number of subdomains with the inter-overlapping area (partially or fully overlapped). In categories I and II, the fine-grid or coarse-grid subdomains can be defined by their representation, while in category III the fine-grid or coarse-grid subdomains are defined as usual. Next, implement the Schwarz Alternating Procedure (SAP) to exchange the data among subdomains, where the coarse-grid correction is used to remove the high frequency error that occurs when the data interpolation from the fine-grid subdomain to the coarse-grid subdomain is conducted. The strategy behind the coarse-grid correction is to adopt the operator of the divergence of velocity field, which intrinsically links the pressure equation, into this process. The solution of each subdomain can be efficiently solved by the direct (or iterative) eigenfunction expansion technique or preconditioned method with the least storage requirement, i.e. O(N²) in 2-D. Numerical results of (i) driven cavity flow (Re = 100,400) with Cartesian grids (category I) in each subdomain, (ii) driven cavity flow (Re = 3200) with local adaptive grids (category III) in each subdomain, and (iii) flow over a cylinder (Re = 250) with ‘O’ grids in one subdomain and Cartesian grids in another (category II) will be presented in the paper to account for the versatility of the proposed multi-grid method.     

广州市住宅直饮水设计定额的确定

对住宅直饮水系统的实际运营情况进行了分析,运营中出现的销售水量低于直饮水定额、制水设备实际工作时间低于额定时间及水表工作不正常等现象都反映了现行直饮水设计定额的不合理性,建议将用水量定额定为5～8L/(户·d),既符合实际情况又能满足居民远期需求。     

ZG3Cr13钢经长期时效后组织及硬度的研究

研究了ZG3Cr13钢在550℃～600℃的工作温度区间经2500h长期时效后的硬度及组织的变化。结果表明，在时效1000h内，硬度有明显的下降，之后趋于稳定；组织变化与正常处理后的组织均匀化程度有关，原始组织越均匀组织稳定性和热强性越高。     

采用激光光刀的叶片三维面形测量方法

提出一种采用激光光刀的叶片三维面形测量方法。介绍了方法原理、系统结构、信息获取与处理方案,并给出了对实际飞机发动机叶片的面形测量结果。     

Learning-based dynamic coupling of discrete and continuous trackers

We present a data-driven dynamic coupling between discrete and continuous methods for tracking objects of high dofs, which overcomes the limitations of previous techniques. In our approach, two trackers work in parallel, and the coupling between them is based on the tracking error. We use a model-based continuous method to achieve accurate results and, in cases of failure, we re-initialize the model using our discrete tracker. This method maintains the accuracy of a more tightly coupled system, while increasing its efficiency. At any given frame, our discrete tracker uses the current and several previous frames to search into a database for the best matching solution. For improved robustness, object configuration sequences, rather than single configurations, are stored in the database. We apply our framework to the problem of 3D hand tracking from image sequences and the discrimination between fingerspelling and continuous signs in American Sign Language.     

SISAK快速化学分离装置的建立

SISAK(Short-lived Isotopes Studies by the AKUFVE technique)技术是目前使用最广泛的快速化学分离方法之一,主要应用在短寿命核素的分离和鉴别、超重元素的人工合成以及化学性质研究等方面的工作中.本文简单地叙述了SISAK技术的流程、原理和发展现状,介绍了自行建立的国内第一套基于SISAK技术的快速化学分离装置,并通过从裂变产物中分离短寿命核素这一实例验证了SISAK技术在快速化学分离中的优越性.