高斯颜色模型在瓷片图像分类中的应用

由于RGB颜色空间不能很好贴近人的视觉感知,同时也缺少对空间结构的描述,因此采用兼顾颜色信息和空间信息的高斯颜色模型以获取更全面的特征,提出了一种基于高斯颜色模型和多尺度滤波器组的彩色纹理图像分类法,用于瓷器碎片图像的分类。首先将原始图像的RGB颜色空间转换到高斯颜色模型;再用正规化多尺度LM滤波器组对高斯颜色模型的3个通道构造滤波图像,并借助主成分分析寻找主特征图,接着选取各通道的最大高斯拉普拉斯和最大高斯响应图像,与特征图联合构成特征图像组用以进行参数提取;最后以支持向量机作为分类器进行学习和分类。实验结果表明,与基于灰度的、基于RGB模型的和基于RGB_bior 4.4小波的方法相比,本文方法具有更好的分类结果,其中在Outex纹理图像库上获得的分类准确率为96.7%,在瓷片图像集上获得的分类准确率为94.2%。此方法可推广应用到其他彩色纹理分类任务。     

一种新颖的低层视觉特征到高层语义的映射方法*

通过在低层视觉特征上提取图像的局部颜色和纹理特征,再利用模糊神经网络建立低层视觉特征和高层语义特征之间的映射,实现了图像属性信息的有效传递和可靠检索.最后,为了提高检索效率,把相关反馈引进到图像检索系统中.实验证明,该方法取得了较好的检索查全率和准确率.     

纺织厂建设改造中的色彩工学

提出纺织工业领域色彩量化设计的构想,给出了作为色彩量化设计依据的色彩标准体系,并从色彩的标准化、色彩的实验心理效应等方面进行了分析,针对纺织厂的“人-机-环境”系统、原有设备色彩改造以及厂区建筑的色彩效应等探讨了色彩量化设计的可行性,并结合目前纺织厂的特点提出了色彩量化设计的实施方案以及改造方法。     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

冷轧双相钢显微组织检测与分析

使用光学显微镜在冷轧双相钢的显微组织检测过程中发现传统的彩色金相技术在显微组织辨识上仍然存在困难,特别是除铁素体和马氏体外还含有贝氏体或残余奥氏体相的双相钢;同时在对第二相面积含量的测量中也存在困惑和困难,彩色金相腐蚀和硝酸酒精腐蚀下的第二相面积含量在不同的腐蚀方法下也存在差异,部分试样只能显示或完成马氏体含量的测量。为解决这些问题,通过扫描电镜、光学显微镜及彩色金相腐蚀技术对含有复杂形态的冷轧双相钢组织形态进行了分析,并辅助多种腐蚀剂对显微组织进行了定性和定量的测量工作。     

Coloring effect of the organic hybrid of polyamide 6 and N,N′‐ethylene‐bis(tetrabromophthalimide)

Coloring study in organic hybrid of polyamide (PA6) and N,N′‐ethylene‐bis(tetrabromophthalimide) (EPT), where the chromophore was self‐assembled by hydrogen bonding formed between PA6 molecular chains and EPT compound, have been characterized by several techniques. CS930 double wavelength lamella scanner was employed to measure the change of color. The existence of hydrogen bonding in PA6/N‐N′‐ethylene‐bis (tetrabromophthalimide) (PA6EPT) was investigated with Fourier transform infrared (FTIR), the results of which were compared with that of PA6 with the same thermal history. FTIR spectra at room temperature revealed that there is essentially hydrogen bonding between PA6 and EPT. The crystallization behavior of PA6EPT affected by hydrogen bonding was studied by using FTIR. The temperature‐dependent behavior of both PA6 and PA6EPT was studied by temperature‐FTIR spectroscopy and differential scanning calorimetry (DSC). With temperature increasing, changes in sensitive, high‐resolution absorbance spectra are observed as dissolve‐volatilizing thin film. Temperature‐FTIR results showed that the hydrogen bonding in PA6EPT attenuated and dissociated considerably at a smaller rate than PA6, that is to say, hydrogen bonding in PA6EPT is more stable than that in PA6. DSC showed that the melting temperature of PA6EPT and PA6 are similar. However, the crystalline degree and crystalline temperature and melting enthalpy of PA6 and PA6EPT are different. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 594–600, 2007     

Outdoor attractancy of males ofMatsucoccus josephi (Homoptera: Matsucoccidae) andElatophilus hebraicus (Hemiptera: Anthocoridae) to synthetic female sex pheromone ofMatsucoccus josephi

The active component of the sex pheromone ofMatsucoccus josephi is (2E,6E,8E)-5,7-dimethyl-2,6,8-decatrien-4-one; the chemical is also a powerful kairomone of adult males and females of the bugElatophilus hebraicus the principal predator ofM. josephi. The presence of theZ isomer (2E,6Z,8E)-5,7-dimethyl-2,6,8-decatrien-4-one does not interfere with the attractancy of the activeE component forM. josephi males or the bug. Our results show a clear dose-response between trap catch ofM. josephi males andE. hebraicus. Conversely, increasing amounts of theZ isomer in the mixture did not affect the attraction of the scale insect males or the bug. The catch ofM. josephi males did not differ significantly among traps of different color, and was significantly higher with traps attached to the tree trunk than those suspended between trees. Comparison of the catch ofM. josephi among the three forests and between pine species suggests that the level of infestation ofPinus halepepsis andPinus brutia ssp.brutia is similar, despite the fact that the latter pine is resistant to the scale insect. Both sexes ofE. hebraicus were trapped in much lower numbers at the more infested sites. This may be related to interference with the activity ofE. hebraicus due to deterioration and drying of parts of the tree crowns and heavy colonization by generalist predators in injured trees.     

基于RBF神经网络的遗传算法在织物染色配色中的应用研究

本文提出一种基于RBF神经网络的遗传算法解决织物染色配色问题的模型,该模型以遗传算法为主,通过使用RBF神经网络建立遗传算法的适应度函数来共同解决织物染色配色问题。通过实验表明,使用基于RBF神经网络的遗传算法配色模型可以快速提供满足企业要求的染色配方。     

牙科陶瓷配色方法和应用的初步研究

探讨牙科陶瓷配色的方法和机理，通过将钒锆黄、锆镨黄、锆铁红、铬铝锌红对牙科陶瓷进行配色。采用分光光度计测量了样品的L＊、a＊、b＊值和色差，并与VitaA2和ceramcoA2瓷粉对比，研究了样品色差与配方之间的关系。     

元明青花红绿彩的研究与考证

青花红绿彩作为加彩器的一种,比传统的观点早一个朝代,根据明中青花红绿彩盖罐结合最新的窑址考古成果,得出元代的窑炉设计和釉面配方的缺陷,使元代青花红绿彩的生产和存世极少,明官窑中由于斗彩的出现,青花红绿彩在民间一直沿烧。与元代风格相近,只是到了后期风格才大变。