碘量法测铜中物质性质和分析操作

本文讨论了碘量法测定铜量中一些有关物质的特性,以及这些性质对分析条件和操作的要求。     

降低氧化铝生产中熟料折合比的探讨

在氧化铝生产过程中，熟料折合比是烧结法一项重要的综合性指标，本文通过对熟料折合比的定义、计算公式的剖析，分析了生产过程中影响熟料折合比的主要因素，对有效降低熟料折合比的措施进行了探讨。     

Trypsin inhibitor activity of soybean as affected by genotype and fertilisation

The presence of protease inhibitors in soybean prohibits the utilisation of the raw beans for food and feed. However, little information is available about environmental influences and the effects of nitrogen and sulphur supply on the antinutritional constituents of soybean. As these factors may influence protease inhibitors, soybean genotypes segregated according to the presence or absence of the Kunitz trypsin inhibitor have been evaluated for trypsin inhibitor activity (TIA) in field trials. TIA was affected significantly by environment (geographical location), fertilisation treatment and genotype. Environmental means of TIA were between 69.5 and 104.8 mg g^?1. Nitrogen application, which caused an increase in seed protein content, resulted in a reduction in TIA by about 15% as compared with the control. Remarkably, simultaneous application of nitrogen and sulphur in the form of ammonium sulphate had a similar reductive effect on TIA to that of nitrogen application alone, although soybean protease inhibitors are rich in sulphur amino acids. Significant genetic variation in TIA was found both within the genotype class with the Kunitz inhibitor present as well as within the class lacking this inhibitor. The results suggest that TIA of soybean may be modified considerably by genetic improvement and appropriate agronomic management. Copyright © 2003 Society of Chemical Industry     

Empirical Evaluations of Usage-Based Reading and Fault Content Estimation for Software Inspections

This thesis describes six empirical investigations of two techniques applied to software inspections, namely reading techniques and fault content estimation techniques. The first part of the thesis presents a series of experiments of a novel reading technique called usage-based reading. The second part investigates fault content estimation applied to the software inspection process. The estimation methods used are capture-recapture and curve fitting.     

ICP-AES法测定硅铝钡合金中的钡

介绍ICP—AES法测定硅铝钡中的钡的分析方法，用氢氟酸一硝酸一高氯酸混合酸溶解试样，用钡的233．527nm谱线测定钡．该方法简便快速，精密度好，准确度高，加标试验回收率为99％～100％，相对标准偏差为0．25％～0．56％．     

Equilibrium Moisture Characteristics of High Oleic Sunflower Seeds and Kernels

The equilibrium moisture content (EMC) characteristics of high oleic sunflower seeds and kernels between 10 and 55°C were determined by equilibrating the samples to known relative humidities (RH) above saturated salt solutions. EMC of the kernels was lower than that of seeds in the range of 11 to 96% ERH and at 25 and 40°C. Hysteresis effect was found for the EMC properties of seeds and kernels at 25°C. Four EMC-ERH models (modified Henderson, Chung-Pfost, Halsey, and Guggenheim-Anderson-de Boer) and their estimated parameters were evaluated for goodness of fit. GAB and Halsey equations showed the best fitting of experimental data although GAB equation adjusted for temperature described the EMC data the best. Components of the seed as oil content or hull/kernel ratio did not explain the slight differences in EMC found between the varieties.     

测井岩性类比解释法及应用

利用理想的地质体积模型和电阻率测井的供电电流流过模型的导电机理,推导出一种不需要含水饱和度参数即能定量计算含水饱和度的方法,即岩性类比解释法。经过初步实践,该方法应用于砂泥岩地层的测井分析,效果良好。     

烟用香料配制的气相色谱法质量控制研究

采用气相色谱法对香料房卷烟用料液中的溶剂及水分进行检测,分析测定其中的水分、乙醇、丙二醇、山梨醇等的含量,通过对香料房每批配制料液的抽检,可以跟踪料液配制的准确性,保证卷烟产品质量,该方法操作简单、准确性高、重现性好。     

On collaborative content distribution using multi-message gossip

We study epidemic schemes in the context of collaborative data delivery. In this context, multiple chunks of data reside at different nodes, and the challenge is to simultaneously deliver all chunks to all nodes.     

A Mass Transport Model for Drying Wood under Isothermal Conditions

Mass transport in wood during drying can have different mechanisms at different periods of drying. Depending on the current moisture content (MC) and the structure of the wood, the driving forces for the mass transport are essentially different. Above the fiber saturation point (FSP), the lumens are partially saturated and the transport of liquid (free) water occurs as a consequence of capillary action. On the other hand, below the FSP, bound water within the cell walls is conveyed by diffusion, and water vapor in the lumens moves under influence of pressures gradient. Based on these considerations, a unified model is presented that takes into account the transport of the different moisture phases. Simulation of the drying of a Norway spruce sample at 50°C from about 135 to 7% MC is carried out using the finite element method (FEM). Comparison between the simulated average MC and the experimental observations obtained from X-ray computed tomography (CT) shows reasonable agreement. Possible simplifications in the model are briefly discussed as well as some aspects of the numerical implementation. Finally, the influence of absolute permeability on the average MC is studied.