Influence of nano-scaled dispersed second phase on substructure of deformed dispersion strengthened copper alloy

The deformation behavior of dispersion strengthened copper alloy Cu-Al2O3 was studied by TEM. The results show that nano-scaled dispersed second phase not only increases dislocation density in matrix, but also has an important influence on the dislocation substructure. The presence of fine dispersed Al2 O3 particles results in a uniform and random dislocation distribution in matrix copper and causes the difficulty in formation of dislocation cell structure and the decrease in the amount of cell structure during deformation. Deformation gives rise to much more dislocations and dislocation cells form more difficultly and the decrease in the cell size with the increase of dispersion degree.     

Use of recycled copper slag for blended cements

Copper slag is a by‐product generated during smelting to extract copper metal from the ore. The copper slag obtained may exhibit pozzolanic activity and may therefore be used in the manufacture of addition‐containing cements. In this paper the effect of the incorporation of the copper slag in cement is measured. Blends of copper slag with Portland cement generally possess properties equivalent to Portland cement containing fly ash, but very different to the silica fume incorporation. Copper slag and fly ash reduce the heat of hydration more effectively than silica fume in mortars. The replacement of 30% cement by copper slag reduces the flexural and compressive strength in a similar way to fly ash; however, after 28 days, the reduction is less than the percentage of substitution. Hydrated calcium aluminate phases were analysed using scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques. The pozzolanic activity of copper slag is similar to that of fly ash and higher than silica fume. In the presence of low water/cement ratios, certain pozzolanic materials produce a very compact cement paste that limits the space available for hydration products, a determining factor in the formation of hydrated calcium aluminates. SEM was found to be a useful analytical technique when aluminates are formed and can be clearly detected by XRD. Copyright © 2008 Society of Chemical Industry     

化学还原法制备纳米铜粉的研究

本文采用KBH4在液相中化学还原CuSO4,并加入KOH和络合剂EDTA ,制得了纳米级的纯净的铜粉 ,通过调整反应物的浓度 ,可以消除Cu2 O等杂质。制备的纳米铜粉还存在一定程度的团聚 ,需试验加入分散剂来改善。     

金堆城钼精选尾矿选铜技术进展

系统介绍了陕西华光实业有限责任公司有色金属选矿厂17年来围绕提高选铜技术经济指标进行的技术改造和科研攻关实践及取得的效果。     

制冷空调用铜管质量标准现状

本文介绍了我国制冷空调用铜管的质量标准:GB/T17791-1999《空调与制冷用无缝铜管》、YS/T440-2001《内螺纹铜管》、GB/T1531-1994《铜及铜合金毛细管》以及《冰箱用高清洁度铜管》和《铜及铜合金无缝翅片管》的制订背景,分析了标准水平,提出了制冷空调用铜管在满足标准的同时,还要加强实物质量的提升。     

给水铜管分水布置的支管缩径可行性分析

住宅给水铜管分水布置是一种技术可行、经济合理的管道布置方式。在确定了管道的设计要求后,分析了分水缩径后的流速情况,明确了分水布置方式中支管缩径的技术状况。分析表明,支管缩径是可行的。     

铜冶炼企业金银回收率计算方法的选择

针对某厂金、银总平衡情况，分别采用平衡法和连乘法计算金、银回收率，得出两种不同的结果，文章分析了产生不同结果的原因，探讨不同的企业如何根据自身特点，选择与之相适应的金、银回收率计算方法，以便准确地反映本企业的回收率实际水平。     

调节剂对烷基水杨醛肟萃取铜铁的影响

烷基水杨醛肟虽然是一种高选择性的铜萃取剂，但单独使用时，萃取相易出现沉淀；反萃时，再生有机相出现乳化物，而且两相分离时间较长．将月桂醇、仲辛醇、壬基酚三种调节剂分别加入到萃取剂中，研究其对烷基水杨醛肟萃取及反萃行为的影响．结果表明，三种调节剂均可以解决上述问题，只是使萃取能力略有降低；壬基酚加入到烷基水杨醛肟中有助于提高铜铁分离系数，可达647．     

铜密闭鼓风炉生产效益的回归分析

通过铜密闭鼓风炉生产过程中关键指标的回归分析,寻找降低消耗、增加产出、提高经济效益的有效途径     

低松装密度水雾化铜粉工艺的研究

本文研究了氧化 还原法生产铜粉的新工艺 ,该工艺是通过氧化还原将水雾化铜粉加以表面改性 ,形成海绵状的粉末 ,显著降低水雾化铜粉的松装密度 ,这种铜粉既具有电解铜粉低的松装密度 ,又具有水雾化铜粉高的流动性。讨论了氧化时间、氧化温度对铜粉松装密度的影响。本工艺是一种新型环保、节能、可替代电解法生产铜粉的先进工艺