印制板蚀刻、微蚀刻废液的再生和铜回收的技术及设备

传统的印制板蚀刻废液处理方法存在着工艺落后、操作不便、二次污染、效益不高等问题,本工艺采用特殊的萃取电解、吸附电解技术,使蚀刻废液得以再生循环利用,铜得以100%回收,低含铜废水铜得到98%回收,整个系统不产生二次污染,获得的铜为高纯度铜板,在实现污染控制的同时,废液废水得到了资源化利用。     

高铅硫化铜精矿的二段焙烧

高铅硫化铜精矿进行湿法铜铅分离时，焙烧过程因有低熔点组份产生，使培砂中铜浸出率仅为73％～82％，达不到工艺要求。经二段焙烧后消除了上述影响，铜浸出率达到97．4％，实现了铜铅分离。     

Advantages of high-field tokamaks for fusion reactor development

High-field designs could reduce the cost and complexity of tokamak reactors. Moreover, the certainty of achieving required plasma performance could be increased. Strong Ohmic heating could eliminate or significantly decrease auxiliary heating power requirements and high values of n_E could be obtained in modest-size plasmas. Other potential advantages are reactor operation at modest values of , capability of higher power density and wall loading, and possibility of operation with advanced fuel mixtures. Present experimental results and basic scaling relations imply that the parameterB ²a, where B is the magnetic field and a is the minor radius, may be of special importance. A superhigh-field compact ignition experiment with very high values ofB ²a (e.g.,B ²a=150 T² m) has the potential of Ohmically heating to ignition. This short-pulse device would use inertially cooled copper plate magnets. Compact engineering test reactor and/or experimental hybrid reactor designs would use steady-state, water-cooled copper magnets and provide long-pulse operation. Design concepts are also described for demonstration/commercial reactors. These devices could use high-field superconducting magnets with 7–10 T at the plasma axis.     

Inhibition behavior for copper corrosion by photoelectrochemical methods

wavelengthofmono chromatelightwas 4 2 0nm .3　RESULTSANDDISCUSSION3.1　ApplicationofphotoelectrochemicalmethodtoevaluatetheeffectsofinhibitorsforcoppercorrosionThestructuresoftheinhibitorsforcoppercorro sionshownintextareasfollows:Theinhibitioneffectsofdifferentinhibitorsforcoppercorrosioncanbeevaluatedby photoelec trochemicalmethod .AsshowninRef .[12 ],onanegativepotentialscan ,thepotentialcorrespondingtothecathodicphotocurrentJph=0isdefinedasΦV,atwhichCu2 Oontheelectrodesurfaceisc…     

从铜镉渣中回收镉的试验研究

本文介绍了从铜镉渣中回收镉的试验研究情况，采用酸浸-铜镉渣中和-锌粉除铜法处理铜镉渣，工艺简单合理，镉直收率高，有一定的推广价值。     

天然沸石与纳滤组合工艺处理铜突发污染的应用

纳滤工艺被广泛应用于分散式饮用水深度处理,能解决饮用水苦咸化,盐碱化或微污染等常规水处理工艺无法规避的用水风险,在长时间运行过程中还能有效应对重金属等突发污染风险。但重金属污染易加重纳滤膜污染,需要增设预处理装置加以缓冲,实现纳滤装置的长久稳定运行。而天然沸石具有良好的筛分性能和吸附性能,能够有效缓冲重金属对纳滤装置的冲击。试验以重金属铜为例,证明水中铜离子会造成纳滤不可逆污染比例增加,不利于系统稳定运行;天然沸石对铜离子有很好的吸附效果,静态吸附试验表明天然沸石对水中铜离子的最大吸附量为3.03 mg/g,通过正交试验合理设计吸附预处理,能够有效为纳滤工艺提供安全进水,保证纳滤进水铜离子浓度低于10 mg/L。实践工艺中,吸附预处理能有效缓解纳滤膜不可逆污染,而且吸附-纳滤组合工艺对铜离子及部分其他重金属离子表现出良好的处理效果。     

Differential Cytotoxicity Mechanisms of Copper Complexed with Disulfiram in Oral Cancer Cells

Disulfiram (DSF), an irreversible aldehyde dehydrogenase inhibitor, is being used in anticancer therapy, as its effects in humans are known and less adverse than conventional chemotherapy. We explored the potential mechanism behind the cytotoxicity of DSF-Cu⁺/Cu²⁺ complexes in oral epidermoid carcinoma meng-1 (OECM-1) and human gingival epithelial Smulow-Glickman (SG) cells. Exposure to CuCl₂ or CuCl slightly but concentration-dependently decreased cell viability, while DSF-Cu⁺/Cu²⁺ induced cell death in OECM-1 cells, but not SG cells. DSF-Cu⁺/Cu²⁺ also increased the subG1 population and decreased the G1, S, and G2/M populations in OECM-1 cells, but not SG cells, and suppressed cell proliferation in both OECM-1 and SG cells. ALDH enzyme activity was inhibited by CuCl and DSF-Cu⁺/Cu²⁺ in SG cells, but not OECM-1 cells. ROS levels and cellular senescence were increased in DSF-Cu⁺/Cu²⁺-treated OECM-1 cells, whereas they were suppressed in SG cells. DSF-Cu⁺/Cu²⁺ induced mitochondrial fission in OECM-1 cells and reduced mitochondrial membrane potential. CuCl₂ increased but DSF- Cu²⁺ impaired oxygen consumption rates and extracellular acidification rates in OECM-1 cells. CuCl₂ stabilized HIF-1α expression under normoxia in OECM-1 cells, and complex with DSF enhanced that effect. Levels of c-Myc protein and its phosphorylation at Tyr58 and Ser62 were increased, while levels of the N-terminal truncated form (Myc-nick) were decreased in DSF-Cu⁺/Cu²-treated OECM-1 cells. These effects were all suppressed by pretreatment with the ROS scavenger NAC. Overexpression of c-Myc failed to induce HIF-1α expression. These findings provide novel insight into the potential application of DSF-CuCl₂ complex as a repurposed agent for OSCC cancer therapy.     

稀土在铜及其合金缓蚀剂中的研究

通过失重悬挂法和中性盐雾等腐蚀试验，研究了多种添加剂对铜及其合金的缓蚀作用，结果表明：在BTA溶液中加入一定量的有机羧酸和和稀土RE（IV）盐后，由于三者的协同效应，显著提高了钝化膜的性能。     

纯铜动态再结晶的Monte Carlo法模拟

本文建立了一种基于能量判据的确定动态再结晶各个阶段临界应变的方法，并基于此种方法Monte Carlo(MC)法进行了纯铜动态再结晶的二维模拟，定量计算了变形引起的存储能与变形之间的关系，计算出了发生动态再结晶的临界应变。模拟结果表明，采用MC法可以揭示动态再结晶的形核生长过程与应变历史之间的关系。结合本文所建立的基于能量判据的确定动态再结晶各个阶段临界应变的方法，可以预测开始发生动态再结晶的临界变形条件。     

玻璃包覆纯铜微丝的制备与表征

采用熔融纺丝法制备了玻璃包覆纯铜微丝,对微丝进行了组织观察以及尺寸和缺陷表征,提出了不同冷却条件下的纯铜芯丝凝固过程模型,讨论了制备过程中存在的问题并提出了相应的解决方案.结果表明:在空气中自然冷却凝固的纯铜芯丝内部组织为细等轴晶,加冷却水快速冷却凝固制备的纯铜芯丝内部的晶粒沿着微丝长度方向呈竹节状整齐排列;当微丝外径为45μm、芯丝直径为25 μm时,外径尺寸波动在6%以内,芯丝直径误差小于4%;当原料质量存在问题或制备过程中拉丝速度、冷却速度等工艺参数匹配不合理时,易导致芯丝表面存在凹坑和凹槽等缺陷.