CH_4、CO_2与O_2制合成气的研究 Ⅱ工艺条件的影响

在固定床反应器中考察了１２％Ｎｉ－５％ＲＥ－２％Ｃｕ－２％Ｌｉ／Ａｌ２Ｏ３（ｍａｓｓ）催化剂在ＣＨ４、ＣＯ２与Ｏ２催化氧化重整制合成气反应中催化剂粒径、工艺操作条件（空速与温度）及原料气配比对反应的影响，确定了较佳的操作条件：催化剂粒径２０～４０目，反应最佳温度为８００℃，ＳＶ＝４×１０４ｍｌ／（ｇ·ｈ）。同时看到在不同的原料气配比的条件下该催化剂的活性亦很稳定，不仅达到了反应平衡，且产物Ｖ（ＣＯ）／Ｖ（Ｈ２）比有很强的调变性。     

粒界缓冲型展宽效应对PTC材料温度系数的影响

本文利用相变扩张理论分析了粒界缓冲型展宽效应对BaTiO_3系PTC陶瓷的介电系数及温度系数a_r的影响,指出了晶粒尺寸和温度系数的关系。     

Effect of harvesting time and fruit size on titratable acidity, soluble solid and distribution of limonin in Thai tangerine juice

The effect of fruit size and harvesting of Thai tangerine fruit ( Citrus reticulata , Blanco) at different growth stages, 8–12 months after fruit set, on the distribution of limonin in whole fruit as well as in the individual fruit parts and extracted juice was investigated. The highest limonin concentration was observed in seed, followed by albedo, flavedo, segment membrane and juice sacs in decreasing order. The limonin concentration in juice as well as in whole fruit was decreased when fruit was harvested 8–12 months of fruit set. Increasing harvesting time from 8 to 12 months showed corresponding decreases in the amount of limonin in flavedo, albedo and seed. There was a decrease in titrable acidity and increase in total soluble solid and total soluble solid/titrable acidity ratio of juice with a later than normal harvesting time. However, fruit size showed no effect on limonin content and other properties of juice extracted from tangerine.     

云母粒径对云母／聚丙烯性能的影响

研究了云母填充改性聚丙烯(云母/PP)中云母粒径对其性能的影响。实验结果表明:云母粒径越小使得云母/聚丙烯材料强度提高越大、断裂伸长率增加,加工流动性变好;同时也促进和有利于聚丙烯结晶过程中的成核作用。     

Basic concept and decentralized autonomous control of super‐distributed energy systems

New small‐scale dispersed generation systems, such as fuel cells and micro gas turbines, have made remarkable advances lately and they will be applied practically in the near future. Although a large number of researches on the introduction of small‐scale dispersed generation systems have been carried out, only a small number of small‐scale dispersed generation systems are considered in these researches. Therefore, little is known about problems to be solved when a large number of small‐scale dispersed generation systems are introduced into electric power systems. This paper deals with a super‐distributed energy system that consists of a great number of dispersed generation systems such as fuel cells, micro gas turbines, and so on. The behavior of a customer with a dispersed generation system is simulated as the Ising model in statistical mechanics. The necessity of a distribution network in super‐distributed energy systems is discussed based on the Ising model. The feasibility of decentralized autonomous control using vicinity information is also investigated on the basis of stability analysis of the Hopfield neural network model. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 151(1): 43–55, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10368     

硼预淀积对自组织生长Ge量子点尺寸分布的影响

研究了以不同B2H6流量预淀积硼对UHV/CVD自组织生长Ge量子点尺寸分布的影响。在适当的生长条件下,得到了尺寸分布很窄的均匀Ge量子点,用AFM对量子点的形貌进行观察,Ge量子点尺寸的涨落小于±3%,量子点的水平尺寸和高度分别为60nm和10nm,密度为8×109cm-2。实验结果表明,通过预淀积硼表面处理,可以得到尺寸分布很窄的量子点,以满足量子点光电器件方面应用的要求。     

C pm MPPAC for manufacturing quality control applied to the precision voltage reference process

The multiprocess performance analysis chart (MPPAC) based on the process capability index C_pm, called C_pm MPPAC, is developed for analysing the manufacturing quality of a group of processes in a multiple process environment. The C_pm MPPAC conveys critical information of multiple processes regarding the departure of the process and process variability from one single chart. Existing research works on MPPAC are restricted to obtaining quality information from one single sample of each process ignoring sampling errors. The information provided from existing MPPAC charts, therefore, is unreliable and misleading and results in incorrect decisions. In this paper, we consider the natural estimator of C_pm based on multiple samples. Based on the natural estimator of C_pm, we consider the sampling errors by providing an explicit formula with the Matlab program to obtain the estimation accuracy of the C_pm. We tabulate the sampling accuracy of C_pm for sample size determination so that the engineers/practitioners can use it for their in-plant applications. An example of multiple precision voltage reference (PVR) processes is presented to illustrate the applicability of C_pm MPPAC for manufacturing quality control.     

复相陶瓷导电性与其粒径级配的关系研究

通过对无序渗流模型的修正，建立了具有不同特征尺寸的两相无序体系的导电模型，推导了相关关系式，将其结果与相复合导电陶瓷的实验结果进行了比较，结论相当一致。由此揭示了陶瓷生料的两相粒径分布对复合导电陶瓷导电性的影响。     

钻井岩屑粒径分布规律的研究

钻井振动筛是固控系统的重要分离设备,其主要任务是清除钻井液中直径大于74μm的固相颗粒。对辽河油田7口井深0～3500m的钻井岩屑进行了实地取样,分析了岩样颗粒直径大于74μm的粒径分布特征。分析结果表明,钻井岩屑具有明显的片状特征,颗粒的粒径分布主要与地层岩性和破岩工具有关,随着井深的变化,其岩样粒径分布呈现出幂分布、2分布和瑞利分布等3组典型规律。给出了岩屑颗粒的概率直径;建议在筛面颗粒运动特性研究、筛网工作载荷的计算和激振方式的选择中,应考虑岩屑颗粒片状特性的影响。     

Using the high pressure methane isotherm for determination of pore size distribution of carbon adsorbents

A method of determining pore size distribution, PSD, of carbon adsorbents based on the high pressure methane isotherm is presented. A generic software package, and an IBM compatible PC, have been used to search for a PSD in the form of a histogram. The method relies on a known local isotherm, in this case, assuming a simplified model of infinite slit shaped carbon pores.Three carbons, having very different pore structures: BPL, PX-21, and PVDC, were analyzed using the new method and the results compared with those obtained from subcritical Ar, and N₂ isotherms. The analysis from the high pressure methane isotherm gave results which are different than those from the low pressure low temperature isotherms but not significantly enough to be unrealistic.