热处理前后丙烯腈／溴乙烯共聚纤维的热性能和阻燃性能研究

分析了热处理前后丙烯腈／溴乙烯共聚纤维的热性能与溴乙烯含量、升温速率或热处理时间的关系，并对纤维的阻燃性与溴含量或热处理时间关系进行了研究。结果表明，溴含量的增加或热处理时间的延长对热稳定性和阻燃性的提高有较大影响，而且经热处理后纤维的阻燃性与溴无关。     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

Increasing productivity and protein content using early-maturing rices and efficient nitrogen management

Germplasm with shorter duration than that of the currently grown varieties is being generated to maximize productivity of irrigated rice. However, short-duration varieties often produce yields lower than the medium- and long-duration varieties. Experiments were conducted during the 1980–82 dry and wet seasons to increase productivity through the use of very early-maturing rices and the improved management of nitrogen (N) fertilizers.Results over three years showed that IR58 and IR9729-67-3 (growth duration 100 ± 5 days) yield as well as or higher than IR36 although earlier maturing. They generally had a higher productivity (kg ha^–1 day^–1) than IR36 (110 ± 5 days).Three years' data suggest that the improved timing of broadcast applications of urea in split doses increased grain yield comparable with the basal incorporation of slow-release sulfur-coated urea (SCU) or deep point-placement of urea supergranules (USG).Results on elite breeding lines showed that the early-maturing IR9729-67-3 produced higher protein yield ha^–1 than longer duration varieties such as IR8 and IR42 in the dry season. Furthermore, contrary to earlier results, single basal incorporation of slow-release SCU increased the protein yield of rice by 53 kg ha^–1 and deep point-placement of USG by 43 kg ha^–1 over split application of prilled urea.     

非金属电镀用导电漆的研制

介绍了导电漆、作为导电填料的片状镀银铜粉的制备工艺流程。分别研究了漆膜表面单位电阻与镀银铜粉的含量及其粒径以及钛酸酯偶联剂的含量之间的关系。结果表明,当镀银铜粉的粒径为400目、质量分数在57%~65%之间,钛酸酯偶联剂的质量分数为10%时,所得涂膜的导电性能最佳。加入含C-18的油酸可以使导电漆长期贮存而电阻值不变。经检测,所得涂膜具有良好的性能:附着力1级,硬度1 H,柔韧性1 mm,冲击强度50 kg/cm2,膜厚10~15μm,漆膜表面每厘米电阻0.15Ω,每分米电阻0.47Ω。指出了导电漆应用过程中的注意事项。     

α-Tocopherol alteration of soybean antiherbivory toTrichoplusia ni larvae

The antioxidant vitamin E, -tocopherol, was tested as a candidate elicitor of alterable antiherbivory in soybean plants against cabbage looper larvae. Although a nonspecific antioxidant, vitamin E proved elicitory to the involved sulfhydryl-dependent receptor-energy transducer protein in soybean plasma membrane. Effects of -tocopherol were dependent on dosage, time, and space in the plant. The observed elicited effects were all decreases in herbivory. The best negative phytochemical correlate of looper feeding was the percentage of increased total HPLC peak area of extractables from elicited as compared to nonelicited leaves. Some specific compounds, e.g., glyceollins, were quantitatively major components of the total profile of secondary metabolites.     

Rheology of cementitious paste with silica fume or limestone

The rheological behaviour of cementitious pastes where cement has increasingly been replaced by densified silica fume (SF), untreated SF or limestone has been studied. The effect of SF on the flow resistance, taken as the area under the flow curve, was found to depend on the dispersing ability of the plasticizer as illustrated by pastes with naphtalene sulphonate-formaldehyde condensate (SNF) and polyether grafted polyacrylate (PA).The gel strengths increased with increasing SF replacement of cement independently of plasticizer type. The cementitious gel strength was, however, depending on the type of SF since pastes with densified SF developed lower gel strengths than pastes with untreated SF. This phenomenon was attributed to agglomerates in the densified SF which remained unbroken by the mixing and measurement sequence.Both flow resistance and gel strength decreased with increasing limestone replacement. Thus, silica fume may have an advantage over limestone filler as stabilizing agent for self-compacting concrete preventing segregation upon standing and reduced form pressure due to a more rapid gel formation.     

Effect of puerarin on the P13K pathway for glucose transportation and insulin signal transduction in adipocytes

To explore the effect of puerarin on insulin receptor (IR), insulin receptor substrate-1 (IRS-1) and protein expression of protein kinase B(PKB) in the P13K pathway of the glucose consumption, transportation and insulin signal transduction in 3T3-L1 adipocytes with insulin resistance. The insulin resistance 3T3-L1 adipocytes model was established by free fatty acid induction. The model cells were managed with puerarin in different concentrations. Glucose consumption was detected with glucose oxidase method, glucose transportation rate was determined by 2-deoxy-3H glucose ingesting method, and the IR, IRS-1 and PKB expression were determined by Western blot. Glucose consumption and transportation were significantly decreased in the model adipocytes, but increased after treated with puerarin (P<0.01). Moreover, the level of tyrosine phosphorylation of IR subunit β was higher in the puerarin treated groups, and that of IRS-1 was higher in the group treated with low dose puerarin than that in the model group. The 3T3-L1 adipocytes of insulin resistance model could be induced by free fatty acid successfully, puerarin could promote the glucose utilization in them to alleviate the insulin resistance, which may be related with the action in advancing the tyrosine phosphorylation of IR and IRS-1.     

Expression of green fluoscrescent protein gene in Sclerotinia sclerotiorum

Protoplasts of the pathogenic plant fungus,Sclerotinia sclerotiorum,were transformed using the pPGF plasmid,which contains green fluorescent protein gene,under the control of Aspergillus nidulans regulatory sequences. The pPGF plasmid was introduced by PEG/CaCl2 treatment. Positive transformants were harvested with hygromycin B (HYG) resistance as selective marker,and then were observed with green fluorescence phenomena in response to blue light,which suggested that GFP gene was cloned into genome DNA of S. sclerotiorum. The transformants were verified mitotically stable by Southern blotting analysis and passage culturing. This study is developed as an initial step for further research into infection mechanisms of S. sclerotiorum to plants and interactions with bio-control fungus.     

定向MWNTs/PMMA的原位聚合制备及耐磨损性

采用原位聚合方法制备了定向碳纳米管/聚甲基丙烯酸甲酯复合材料,并且研究了该复合物的耐磨损性.对定向碳纳米管及其复合物进行了傅立叶红外吸收光谱分析、扫描电镜及光学显微镜观察.采用砝码质量法评价了复合物的耐磨损性.分析结果表明,混酸处理后定向碳纳米管附带了-OH、-COOH基等极性基团.混酸处理后定向碳纳米管束状结构被破坏,定向碳纳米管可以单管形态分散于基体中,碳纳米管表面包覆着PMMA.砝码质量法耐磨损性测试结果表明,定向碳纳米管的加入可提高PMMA复合物的耐磨损性和耐划痕性,当定向碳纳米管用量为0.7%时,复合物的耐磨损性能提升了54%.     

世界溶液丁苯橡胶的主要技术进展

评述了溶液丁苯橡胶的技术现状和主要技术进展。介绍了新型锡锂引发剂和用其制备的溶液丁苯橡胶的性能特点，特别是其突出的滚动阻力特性和在不损失湿牵引性下的优异耐磨性。分析了世界，特别是美国、欧洲和日本的溶液丁苯橡胶的需求现状及发展趋势。