Atomic force microscopy study of biaxially oriented polypropylene films

Atomic force microscopy (AFM) uses a very sharp pointed mechanical probe to collect real-space morphological information of solid surfaces. AFM was used in this study to image the surface morphology of a biaxially oriented polypropylene film. The polymer film is characterized by a nanometer-scale, fiberlike network structure, which reflects the drawing process used during the fabrication of the film. AFM was used to study polymer-surface treatment to improve wettability by exposing the polymer to ozone with or without ultraviolet (UV) irradiation. Surface-morphology changes observed by AFM are the result of the surface oxidation induced by the treatment. Due to the topographic features of the polymer film, the fiberlike structure has been used to check the performance of the AFM tip. An AFM image is a mixture of the surface morphology and the shape of the AFM tip. Therefore, it is important to check the performance of a tip to ensure that the AFM image collected reflects the true surface features of the sample, rather than contamination on the AFM tip.     

污水处理厂污泥厌氧消化优化设计与运行探讨

对国内典型的污水处理厂污泥厌氧消化系统进行调研发现,厌氧消化系统的运行管理尚存在诸多问题。在总结白龙港污水处理厂污泥厌氧消化调试与运行管理经验的基础上,针对厌氧消化工艺存在的普遍性问题,提出了厌氧消化系统设计和运行管理方面的建议,以促进工艺设计优化,提高运行管理水平。     

固态功率组件热耦合效应研究

文中基于热叠加原理研究了固态功率组件中多个离散分布的集中热源的热耦合效应,并证明强迫对流下应用热叠加原理计算的温度场与整场系统数值模拟的结果相当吻合,用它来进行热耦合效应的分析研究是有效的.     

压缩应力下（Tb,Dy）Fe2磁致伸缩的研究

本文利用自制的磁致伸缩测量仪和“ｊｕｍｐ”效应测量仪研究了在一定压强了多晶（Ｔｂ、Ｄｙ）Ｆｅ２棒的磁致伸缩,发现加压时,在一定工艺条件下制作的（Ｔｂ、Ｄｙ）Ｆｅ２棒会有磁致伸缩的变化。卸载后经过热处理,磁致伸缩值在不加压时也会维持一个高值。     

辐射换热的波长匹配问题

由于水的选择性吸收特性,辐射换热中水份波长匹配一直是一个有分歧的问题。文章通过理论与计算论证了这个问题,得出的结论否定了波长匹配的重要性。     

球墨铸铁铁路配件的生产

本文对比了两种铸铁的机械性能,叙述了铸态球墨铸铁铁路配件的生产,分析了球化处理、孕育处理对配件质量的影响。     

浅析40T支架搬运车液压系统油温变化对其效率的影响

介绍了油温变化对40T支架搬运车液压系统油液黏度、液压介质和橡胶类密封件的影响,分析了液压系统的总发热功率、总散热功率,结合动态热平衡的计算,找出了液压系统总效率与油温变化之间的关系,并给出其函数关系式。根据这种关系,通过一种工况的油温实测数据取样,计算出相应的效率值,定量地验证了液压系统油温变化引起效率变化的关系,得出了总效率随着温度变化而变化的结论,即温差增大时,总效率降低;温差减小时,总效率增大。通过该结论可以全面掌握系统的工作状态,通过降低油温有效提高效率。     

Thermal and cardiovascular strain imposed by motorcycle protective clothing under Australian summer conditions

Motorcycle protective clothing can be uncomfortably hot during summer, and this experiment was designed to evaluate the physiological significance of that burden. Twelve males participated in four, 90-min trials (cycling 30 W) across three environments (25, 30, 35 °C [all 40% relative humidity]). Clothing was modified between full and minimal injury protection. Both ensembles were tested at 25 °C, with only the more protective ensemble investigated at 30 and 35 °C. At 35 °C, auditory canal temperature rose at 0.02 °C min^?1 (SD 0.005), deviating from all other trials (p < 0.05). The thresholds for moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 min (SD 20.6) and 180 min (SD 33.0), respectively. Profound hyperthermia might eventuate in ~10 h at 30 °C, but should not occur at 25 °C. These outcomes demonstrate a need to enhance the heat dissipation capabilities of motorcycle clothing designed for summer use in hot climates, but without compromising impact protection.

Practitioner’s Summary:

Motorcycle protective clothing can be uncomfortably hot during summer. This experiment was designed to evaluate the physiological significance of this burden across climatic states. In the heat, moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 and 180 min, respectively.     

Strong stability of the mono-tubular heat exchanger equation with output feedback

We investigate asymptotic behavior of the C₀-semigroup T(t) associated with the mono-tubular heat exchanger equation with output feedback by a perturbation method. It is shown that T(t) is bounded if a constraint is satisfied by the parameters and the spatial distribution function. Further, applying the Arendt-Batty-Lyubich-Vu theorem, a criterion is established to judge strong stability of T(t).