Impregnation of X Zeolite with Alkaline Hydroxide During the Synthesis

Enhancement of the basic properties of the X zeolite with FAU framework has been carried out during synthesis, without further treatment such as ion-exchange or impregnation. Control of the washing stage enables retention of the optimum amount of alkaline hydroxides, which increases the basic catalytic activity of X zeolite in the alkylation of toluene. This alkaline hydroxides neither affect the FAU framework nor the silicon/aluminium molar ratio of the X zeolite. The optimum (Na + K)/Al molar ratio of the improved catalyst was 1.06 corresponding to a washing volume of 200 mL. This X zeolite presented better catalytic activity than a cesium-zeolite prepared by ion-exchange. The presence of hydroxysodalite impurity in the X zeolite increased the amount of impregnated alkaline hydroxides but not the catalytic activity. The present study shows that it is possible to increase the basic properties of the X zeolite directly in the synthesis process.     

双阳煤在PKM气化炉试烧总结

介绍了在PKM气化炉中弱粘结性双阳煤的试烧情况,并给出了主要工艺参数控制范围。试烧结果表明:依兰煤中配入50%双阳煤,汽氧比6.0:1时,气化炉工况良好。     

Effect of incipient removal of hydrogen through palladium membrane on the conversion of methane steam reforming: Experimental and modeling

This paper presents a mathematical model based on the reaction rate expressions to describe the displacement of methane conversion in the steam reforming. The effect of several parameters including weight hourly space velocity (WHSV), load-to-surface ratio, reaction pressure, hydrogen partial pressure in permeate side and reaction temperature were investigated. Simulation and experimental results showed that a conversion higher than 80% could be achieved in a palladium membrane reactor at reaction temperature of 500 °C relative to 850 °C in a conventional fixed bed reactor (FBR). Besides, the yield of CO (<2%) in membrane reactor was much lower than that (>50%) in the FBR, which indicated the significant depression of CO production in use of membrane reactor.     

一种白光测速仪在热锯区域中的应用

阐述白光测速仪的工作原理及优缺点,介绍其在莱钢大H型钢生产线热锯区域的应用.     

Influence of depth-thickness ratio of mining on the stability of a bedding slope with its sliding surface in concave deformation

In order to study the influence of depth-thickness ratio on bedding slope stability, whose sliding surface is flexural concave in shape under mining conditions, this paper aims to study the characteristics of deformation and damage of bedding sliding with depth-thickness ratios of 200:1, 150:1, 120:1, 100:1 and 50:1by adopting numerical simulation analysis software combined with laboratory-made ‘‘under the influence of mining variable sliding surface slope similar simulation test bed", and to propose identification methods for slope stability under the influence of mining. The results show that mining activities under the slope reduce slope stability. With a decrease in the mining depth ratio, the influence of mining on the slope increases gradually, and the damage to the slope gradually expands, the stability of the slope gradually reduces, fracture occurs on the slope toe and the central fissure gradually develops to the surface,and reaches slide threshold when the depth-thickness ratio is 50:1.     

铝—钢双金属复合轧制层厚比及轧制力的研究

用实验方法研究了铝－钢双金属复合轧制时层厚比的变化规律。给出了双金属复合时轧制力的计算式。     

初探混联法生产氧化铝的工艺优化

在目前的生产条件下。通过大量的混联法物料衡算，定量地研究了供矿铝硅比、熟料铝硅比和拜年法赤泥铝硅比对混联法的制造成本、能耗和拜年法与烧结法的生产比例的影响规律，提出我国混联法生产进一步优化的方向和途径。并开发了研究和评价的计算软件。为混联法的生产和设计的进一步优化奠定基础。     

粘土砂旧砂再生效果与其含水量的关系

在影响粘土砂旧砂再生效果的诸多因素中,旧砂中水分含量是最重要的因素。本文就水分含量对再生效果的影响规律、再生效果最佳的水分含量等进行了研究和分析,得出了如下结论:并非含水量越低再生效果就越好,而是存在一个去泥率低谷区;再生效果最佳的适宜水分含量为1～2%。