紫杉醇母核全合成的初步思想实验

紫杉醇的全合成困难，许多工作还只能停留在实验室的模型化合物上。作者以思想实验方法提出了：先以Ｄ－Ａ反应形成Ａ环和Ｃ环，然后用两步形成Ｂ环，最后形成Ｄ环，以此完成紫杉醇母核的全合成。     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

房地产开发企业会计核算问题探讨

本文就房地产开发企业会计核算的现状及特点进行了分析,并提出了完善房地产开发企业会计核算规范的对策。     

适用于LED显示屏或照明工程的异步控制卡DS2000-M1

DS2000-M1是高性能、开放式的LED控制系统,本文从软硬件两方面简述其设计原理。     

陶瓷材料的冷加工与热处理

综述评述最近发展起来的陶瓷材料的烧结后冷加工热处理法“控制破碎成形加工法”，着重介绍该方法的由业，阐明其理论与实验基础，同时，介绍其应用并讨论其发展前景。     

Analysis of a homologous series of non-reducing oligosaccharides from Arnica montana L. Roots

The oligosaccharide component compositions of a series of non-reducing oligosaccharides extracted from the roots of Arnica montana L. has been determined by gel permeation chromatography (g.p.c.). The range of oligosaccharides present was found to extend beyond the octasaccharide previously reported. with 16% to 19% of the oligosaccharides having a degree of polymerisation of between 11 and 19 and almost 3% having a degree of polymerisation greater than 20. The chromatographic behaviour of this series of oligosaccharides is compared with that observed for series of D-gluco-oligosaccharides.     

Drying of Chestnuts (Castanea sativa Mill.) after Osmotic Dehydration with Sucrose and Glucose Solutions

Chestnuts were dehydrated by using a combined method of osmotic dehydration followed by air drying. Samples were osmotically pretreated with sucrose (60% w/w) and glucose (56% w/w) for 8 h, air-dried at temperatures of 45, 55, and 65°C, at a relative humidity of 30% and at a velocity of 2.7 m·s^-1 and the experimental data of the drying kinetics were obtained. Whole samples were dried with different peelings: (a) removal of endocarp and pericarp (peeled) and (b) additionally the internal rough surface (cut). In all cases, cut chestnuts show greater drying rates than peeled samples, indicating that a significant mass transfer resistance in the layer nearest to the surface takes place. Peeled samples pretreated with sucrose solutions behave in a similar way to untreated samples. For the rest of the samples, the cut samples osmotically treated with sucrose solutions and all the samples treated with the glucose solution, the drying rates decrease during drying. Drying kinetics are successfully modeled by employing a diffusional model that takes the shrinkage into account. The effective coefficient of water diffusion was evaluated and correlated with temperature. The quality of the final product was monitored by color change. In spite of the fact that the total color difference is not modified by the osmotic treatment, the L*, a*, and b* color coordinates of cut samples treated with sucrose and glucose solutions do undergo changes; the L* and a* coordinates change less than the b*.     

Single-sided ventilation — Part II. further considerations

This paper extends an earlier report of measurements and computer predictions of flows in a cubical cavity exposed on one side to the scavenging effect of an external stream. Further measurements and photographs are presented; they are consistent with each other and with the predictions of the computational model. Specifically, comparisons are made between measured and predicted mean velocities and turbulent shear stresses, and photographs are used to elucidate features of the shear layers generated by accelerating and decelerating external flows. The computer model is used to deduce approximate relations between internal turbulent activity (measured by mean velocity, turbulence energy and shear stress) and external velocity, percentage ‘window’ opening and relative position of the plane walls upstream and downstream of the cavity.     

BINELOCA 程序与广东岭澳核电站大破口失水事故分析

ＢＩＮＥＬＯＣＡ程序是在吸收国外先进大破口失水事故分析计算机程序的基础上，针对我国现有大破口失水事故分析程序的不足和工程应用方面的问题，采用了一些成熟的、新型的和当今国际公认的瞬态热工水力数学物理模型以及水和蒸汽性质参数计算公式改编而成的大破口失水事故分析程序。通过对广东岭澳核电站大破口失水事故的计算表明，ＢＩＮＥＬＯＣＡ程序计算的结果与法国计算的结果是一致的。     

应用系统工程原理 促进炼铁技术进步

应用系统工程原理,从铁前抓起,不断进行技术改造,使焦化、烧结、炼铁工艺及设备系统不断优化,从而确保了300m~3高炉的强化冶炼。