高分子聚合物约束阻尼复合结构的计算

摘 要 论述了高分子聚合物约束阻尼复合结构损耗因子的有限元计算方法，并详细研究了模态应变能法的理论分析及其在ANSYS软件上计算约束阻尼复合结构损耗因子的计算程序。     

读写频繁云存储网络应用的数据备份方法

文章根据读写频繁的云存储网络应用的数据存储特点,提出了一种新的数据备份方法,旨在最优化地利用已有的系统资源,为用户提供更好的用户体验。文章中的数据备份方法包括基于数据节点废弃度计算与用户访问预测的副本创建机制和基于存储平衡预测算法与副本健康度计算的负载调整机制。文章的数据备份方法与现有技术相比针对日益流行的社交类云存储网络应用进行了优化,将多种数据参数加权计算作为衡量数据节点优劣和副本文件价值的标准,在保证用户使用体验的前提下使各数据节点达到负载的均衡,并且避免了云服务器端将有限的计算资源浪费在频繁的副本调整过程中。     

纺丝侧吹风空调系统的节能措施分析

分析了纺丝侧吹风空调机组及送回风系统设计及其自动控制系统配置的节能措施。合理选择送风余压、送风量、送风温度、送风相对湿度等工艺参数以及空调机组的形式,正确利用回风和自动控制方式,加强生产运行管理,有利于节能。     

Study of mass transfer in a vertically moving particle bed electrode

A study was made of the influence of process parameters on the mass-transfer coefficient in a flow-through cell with a cascade of rotating drums partially filled with conductive particles (called the vertically moving particle bed). Copper deposition from an acidic sodium sulphate solution was used as the model reaction. To evaluate the experimental data a macrohomogeneous mathematical model of potential and current density distribution inside the cell was developed. The electrolyte flow distribution between the empty space above the particle bed and through the bed was evaluated. On the basis of these results the following correlation is proposed:

型腔体组件装配尺寸检测技术分析与运用

为解决型腔体组件装配尺寸的检测问题,以某枪型的型腔体组件为例,分析该型腔体组件的结构特点,设计组合型检测装置,实现准确检测目的.归纳总结了型腔体组件装配尺寸检测技术运用过程中检测装置的设计要领,采用设计与被测型腔体组件相匹配的组合型检测装置,有效解决了型腔体组件装配尺寸检测过程中的定位困难、操作繁琐、检测准确性差等问题.该检测技术对确保型腔体组件装配尺寸的检测稳定性、检测可操作性、检测准确性等方面具有现实的指导意义.     

Kinetic study of radical polymerization. II. Solid‐state bulk polymerization of sodium methacrylate by differential scanning calorimetry

The solid‐state radical polymerization of sodium methacrylate was investigated. It was initiated by azobisisobutyronitrile, which was used as a radical initiator. Differential scanning calorimetry (DSC) was used to observe the endothermic and exothermic transitions during the polymerization reaction. Structural studies were performed with the DSC thermograms and Fourier transform infrared and ultraviolet–visible spectra, and all of the results confirmed the progress of the reaction. The obtained data revealed that the polymerization reaction proceeded completely with a 100% conversion. ΔH of this reaction was calculated with various amounts of the initiator, and the peak temperatures were determined at different heating rates. The activation energy (19.7 kcal mol^?1) was also obtained by the Kissinger method for this type of solid polymerization reaction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1648–1654, 2003     

Ru-doped nanostructured carbon films

Pure and Ru-doped carbon films are deposited on Si (100) substrates by electron cyclotron resonance chemical vapor deposition. The films are characterized by transmission electron microscopy, electron energy loss spectroscopy, energy dispersive X-ray spectroscopy and atomic force microscopy. In both the pure and Ru-doped samples, diamond nanocrystallites are formed in amorphous carbon matrices. The Ru-doped film contains much smaller diamond nanocrystallites (approx. 3 nm) than the pure samples (approx. 11 nm). Lower surface roughnesses are observed in both pure and Ru-doped samples as compared to other reported nanocrystalline diamond films. The conductivity of the Ru-doped film is significantly higher than that of the pure film. The results show that Ru-doped nanocrystalline diamond films have unique structures and properties as compared to pure nanocrystalline diamond films or metal doped diamond-like carbon films, which may offer advantages for electrochemical, optical-window, field emission or tribological applications.     

轴向冲击下波纹腹板梁的失稳控制和能量吸收

针对Sine波纹腹板梁结构,通过设计其初始振幅缺陷,控制不同波形阶数下波纹梁的失稳模态,引导上下翼板按预期渐进、稳定、可重复的压溃变形模式发展.采用Abaqus/Explicit中的显式动力学方法数值模拟初始振幅缺陷与比吸能(Specific Energy Absorption,SEA)的关系.通过对比低阶、中阶和高阶波形的载荷-位移曲线说明波形阶数对吸能特性和失稳控制的影响.结果表明:对于给定的波形阶数,存在初始振幅缺陷的临界值使Sine波纹腹板梁结构达到预期的临界失稳状态,同时SEA最大;初始振幅缺陷越大,失稳控制越容易,但吸能效果随之降低.     

液氨贮存设计分析

氨是生产含氮肥料及尿素的基本原料，为确保原料供应，必须设置其贮存设施。介绍了常温中压、降温低压和低温常压三种不同的液氨贮存工艺及其特点，并以某大型氨站设计为例，分析了液氨贮存工艺流程、主要设备、材料的选型和工艺参数的确定。     

Preparation of a Novel Composite Material Based on a Nafion® Membrane and Polypyrrole for Potential Application in a PEM Fuel Cell

The process of embedding polypyrrole (PPy) on the surface of a Nafion^® membrane was studied. Three methods of PPy synthesis directly on the membrane surface were compared. The diffusion method based on the separation of monomer and oxidant (peroxidisulphate) solutions by the membrane to be modified is proposed as the most promising one. The monomer diffuses through the membrane to the oxidant side, where it is polymerized. In this case sulphate is incorporated into the film as a counter-ion. PPy film prepared in this way adheres well to the Nafion^® surface and shows promising electrochemical activity. The permeability of the composite for monomer in comparison to self-standing Nafion^® film is reduced significantly. This may be important for the potential application of this composite, especially in a direct methanol fuel cell, as an alternative membrane-electrode assembly (MEA), particularly with regard to the currently used MEA’s permeability for fuel.