电子封装用金属基复合材料的制备

分析了电子封装用金属基复合材料的性能特点及其对制备工艺的要求，在此基础上论述了该种材料的各种制备工艺的特点及发展现状。     

EWB应用于模拟电路分析的研究

介绍了将EWB用于“模拟电子技术”的课堂教学时，虚拟实验测量结果与理论计算值不一致时，如何去分析并解决问题。     

Neutral poly(3,4-ethylenedioxythiophene-2,5-diyl)s: preparation by organometallic polycondensation and their unique p-doping behavior

Neutral and non-doped poly(3,4-ethylenedioxythiophene), PEDOTh(Ni), and its hexyl derivative, PEDOTh-C₆(Ni), have been prepared by organometallic dehalogenation polycondensation of 2,5-dichloro-3,4-ethylenedioxythiophene and its hexyl derivative with a zerovalent nickel complex. PEDOTh-C₆(Ni) was soluble in organic solvents and ¹H NMR data indicated that it had an M_n of 11,000. MALDI-TOF mass analysis of PEDOTh(Ni) gave M_n and M_w of about 1700 and 2400, respectively. PEDOTh-C₆(Ni) showed a UV-Vis absorption peak at 546 nm in CHCl₃. Electrochemical oxidation of PEDOTh-C₆(Ni) started at about −0.40 V vs Ag⁺/Ag and gave a peak at 0.20 V vs Ag⁺/Ag. Chemical and electrochemical oxidation (or p-doping) of PEDOTh-C₆(Ni), both in solutions and in a solid state, led to weakening of the original π-π^∗ peaks and rise of new peak(s) in a region of 800-1500 nm. The p-doping of PEDOTh-C₆(Ni) caused not only a decrease in the intensity of ¹H NMR signals of the bridging ethylene hydrogens but also a decrease in that of the hexyl side chain, suggesting a strong interaction of the p-dopant with the side chain. NMR data of poly(3-methoxythiophene-2,5-diyl) also supported an assumption that p-doping brings about a severe change in electronic state of the substituent attached to the polythiophene main chain. PEDOTh(Ni) had a density of 1.71 g cm⁻³; the molecular packing mode of PEDOTh(Ni) is discussed based on the density of the polymer and its XRD data.     

地域通信网的干扰技术研究

本文在分析地域通信网结构及组成的基础上,研究了对地域通信网实施的节点破坏、末端信息封锁、局部阻塞瘫痪等对抗方法,并使用干扰地域通信网的程度、节点干扰率、末端节点封锁率和传递信息误差率等指标对干扰效果进行评估。     

虚拟仪器在教学中的应用

主要介绍了Multisim2001中虚拟仪器库中函数发生器、示波器的使用方法及功能；并在Multisim2001环境中仿真单管放大电路、桥式整流滤波电路。由调试结果，分析了其在教学中应用的可行性。     

电子工业用高纯氮的生产

生产电子工业用高纯氮的制氮装置 ,其要点和难点是一氧化碳和氢的清除。采用一氧化碳转换炉和特殊的冷箱内流程组织 ,可以生产纯度为 99 9999%以上的高纯氮。对制取电子工业用高纯氮制氮装置与常规制氮装置加氮终端净化器两种流程进行了比较。     

聚合物分解法制备微波介质陶瓷粉体的研究

对采用聚合物分解（Ｐｅｃｈｉｎｉ）法制备ＭｇＴｉＯ＿３粉体进行了研究。通过对聚合中间产物进行红外光谱分析，研究了聚合物分解法制备ＭｇＴｉＯ＿３陶瓷粉体的聚合反应过程及产物。并与用传统固相反应法制备粉体工艺进行对比．从而证明用聚合物分解法可获得单一ＭｇＴｉＯ＿３相材料．并可降低粉体的煅烧温度。     

新型引线热浸镀锡合金的研究

分析比较了进口锡与国产锡的成分和性能。设计出了新型的引线热浸镀锡合金，它具有较低的工作温度、优良的抗氧化性、流动性和可焊性。     

How to make and defend a proposal in a deliberation dialogue

In this paper it is shown how tools developed in argumentation theory and artificial intelligence can be applied to the development of a new dialectical analysis of the speech act of making a proposal in a deliberation dialogue. These tools are developed, modified and used to formulate dialogue pre-conditions, defining conditions and post-conditions for the speech act of making a proposal in a deliberation dialogue. The defining conditions set out what is required for a move in a dialogue to count as the making of a proposal by one of the parties. What is required are the conditions that (1) the move fit the requirements of the argumentation scheme for practical reasoning, and (2) the premises are propositions describing common goals of both parties or propositions that they reasonably consider means to achieve these goals. The analysis goes beyond the standard speech act approach by specifying not only the normative requirements for making a well-formed proposal, but also the requirements for responding to it by questioning or criticizing it, and the requirements for defending it.     

电子商务对企业集团营销手段的影响

介绍了电子商务，以及目前电子商务的发展趋势及对社会的影响，特别阐述了蓬勃发展的电子商务对企业集团的经营环境与手段的影响。