Effect of H2O adsorption on the electrical transport properties of double-walled carbon nanotubes

Water molecules adsorbed on a double-walled carbon nanotube (DWCNT) serve as charge trapping centers when present in low density and as electron donors when present in high density. There is a discontinuous change between the low- and high-density regions. H₂O molecules are apt to be adsorbed on the outer surface of DWCNTs, and in this case the electrical transport properties are extremely sensitive to environment, which suggests that DWCNTs are hole doped and act as an electric dipole with the inner tube.     

用于测定钢液低氧含量的双层固体电解质研究

采用“毛坯浆料法”在ＺｒＯ２（９％摩尔含量ＭｇＯ）管状固体电解质基体表面制备了厚度为１－４μｍ的ＺｒＯ２（１０％摩尔含量Ｙ２Ｏ３）固体电解质涂层，并分别对此在本实验室和美国ＬｅｅｄｓａｎｄＮｏｒｔｈｒｕｐ公司进行了钢液低氧含量测试，结果表明：涂层没有破坏基体的抗热震性：氧浓差电池电动势的重现性偏差由原来的±２ｍＶ；电动势的绝对值提高１０ｍＶ左右；而比日本Ｔｏｒａｙ公司的同类产品提高３５ｍＶ，这说明     

基于数字签名的危险化学品安全管理信息系统的设计与实现磁

文章研究欧盟等主要发达国家危险化学品安全管理的经验和发展趋势,结合我国危险化学品安全管理的现状和存在问题,研究开发一套适合我国国情的危险化学品安全管理信息系统。该系统采用了基于数字签名的身份认证、电子签名、电子签章技术。能有效防止身份冒用、责任否定、越权操作等重大安全问题;克服传统监管模式权责不清、流程混乱、效率低下、监管滞后等弊端;实现安监部门与企业上下及时沟通、实时在线业务办理、科学监管、监管过程电子数据保全。     

电子书包支持的体验学习活动设计与应用研究

旨在研究电子书包支持的体验学习的活动模型和应用效果。首先通过理论分析提出了电子书包支持的体验学习活动模型,并设计了《校园植物知多少》等3个教学专题,之后在某小学进行了试点实验研究。研究结果表明,电子书包支持的体验学习模型确实有助于提高学生的认知体验、行为体验和情感体验的参与度。     

中国化学纤维工业现状及产业用纺织品的发展

概述了中国化学纤维工业的现状和今后的发展方向.着重介绍了中国产业用纺织品的原料、产品开发方向及其主要类别的应用情况.     

数字式电子调速器的研究

简述了电子调速器的产生和发展、优点以及应用的领域,电子调速器的四个组成部分：控制器、执行器、执行器驱动机构和传感器,各个组成部分的作用,不同调速系统采用的不同的执行器和传感器;分述了不同的控制策略：PID控制、模糊控制、模糊PID控制和模糊自适应PID控制,以及对调速系统的调速性能和稳定性的提高;不同系统采用的不同的建模和仿真方法,提出了现阶段电子调速技术存在的几个问题：控制算法的选择、控制器的处理能力和执行器的精度;今后发展的方向：引入智能控制算法、多CPU结构体系的采用、控制器的抗干扰以及专用执行器和传感器的开发和扩展更广阔的应用领域.     

Mechanosynthesis of complex oxides and preparation of mixed conducting nanocomposites for catalytic membrane reactors

Nanopowders of LaGaO₃- and LaMnO₃-based complex perovskites (P) and ceria-based fluorites (F) were prepared by mechanosynthesis. Compatible nanocomposites F + P and P + P with mixed ion and electron conducting (MIEC) properties were prepared and sintered at moderate temperatures up to dense ceramics. The obtained materials were studied by means of XRD, SEM, TEM, electrical conductivity measurements, temperature programmed (TP) reduction/oxidation and preliminary estimations of permeability were obtained. A new strategy based on the advantages of the mechanochemical ceramic approach is proposed to design multilayer ceramic membranes for CMR. Casting technology and one-step sintering were used for the production of thin film membranes with MIEC properties on porous substrates. The coarse fraction of as-milled powders from agglomerates with density 70% was used for the porous substrate, and fine fractions of aggregates with sizes <1 μm were used in preparation of composites for thin dense films. Ceria-based composites prepared by the Pechini route and/or mechanochemical method are proposed as materials for protecting thin films.     

石化企业供应链管理研究

介绍了国内外石化行业的供应链管理现状，对中石化电子化供应链方案进行了分析，并就中石化供应链管理存在的问题提出解决方案。     

Simulation of carbon nanotube based p-n junction diodes

Taking advantage of the unique characteristics of an ambipolar carbon nanotube field effect transistor (CNTFET), a ‘p-n junction’ is simulated along the single-walled carbon nanotube channel using two separate gates close to the source and drain of the CNTFET, respectively. The current-voltage characteristics of the double-gated CNTFET are calculated using a semiclassical method based on the Schottky barrier field effect transistor mechanism. The calculation results show a good rectification performance of the p-n junction.     

电子商务模式的多维分类体系研究

电子商务模式的开展是实现电子商务应用的重要问题之一.为充分探讨电子商务模式的体系建立,在总结已有成果基础上,本文基于电子商务模式的分类讨论十大类基本的电子商务模式,分析构建多维电子商务模式分类体系.