我国制造业国有企业的现状与发展

制造业国有企业在我国国民经济中具有非常重要的地位,其发展状况因所处地区、行业的不同而存在很大差别。从总体上看,制造业国有企业在投入产出能力、企业运营能力、盈利能力和偿债能力等方面都有待于提高。制造业中大型国有企业保持了良好增长态势。国家重点企业通过增加研究与开发投入,发展后劲显著增强。制造业中国有企业的数量在大幅度减少,其所占的比重持续下降,在制造业的不少小行业中,非国有企业已经取代了国有企业,成为行业中的主要力量。     

砼受压损伤力学本构模型的研究

本文利用ＭＴＳ公司８１５．０２型电液伺服试验系统对砼进行了等应变速率加载控制的应力一应变全曲线试验，应用不可逆热力学和内变量理论的成果建立了砼损伤力学模型，并用概率统计的观点分析了损伤的演化规律。由于考虑了不可逆变形的影响，本文所建本构模型与实验吻合较好。     

Basic concept and decentralized autonomous control of super‐distributed energy systems

New small‐scale dispersed generation systems, such as fuel cells and micro gas turbines, have made remarkable advances lately and they will be applied practically in the near future. Although a large number of researches on the introduction of small‐scale dispersed generation systems have been carried out, only a small number of small‐scale dispersed generation systems are considered in these researches. Therefore, little is known about problems to be solved when a large number of small‐scale dispersed generation systems are introduced into electric power systems. This paper deals with a super‐distributed energy system that consists of a great number of dispersed generation systems such as fuel cells, micro gas turbines, and so on. The behavior of a customer with a dispersed generation system is simulated as the Ising model in statistical mechanics. The necessity of a distribution network in super‐distributed energy systems is discussed based on the Ising model. The feasibility of decentralized autonomous control using vicinity information is also investigated on the basis of stability analysis of the Hopfield neural network model. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 151(1): 43–55, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10368     

冷弯型钢纵向变形的理论分析及计算

对冷弯型钢的纵向变形过程进行了力学分析，得到了变形微分方程，求得了转动角的理论公式，并对其变形形状进行了分析计算。     

热处理工艺对冲击曲线的影响

通过ＳＡ５１５Ｇｒ．７０钢的不同温度正火和１３ＭｎＮｉＭｏＮｂＲ钢正火不同温度回火试样的示波冲击试验，研究了不同热处理工艺对冲击曲线的影响。     

Analysis of frictional energy dissipation on an annular surface with harmonic loading

Metallic mating surfaces in structural joints offer a good source of frictional energy dissipation resulting in a damped dynamic structural response. This paper reports the results of experiments where the energy dissipation per cycle occurring at a preloaded flat metallic annular interface subjected to cyclic tangential forces is measured. The effects of certain pertinent joint variables on this frictional energy dissipation are investigated by the application of Response Surface Methodology. A central composite rotatable design was utilized for developing empirical expressions for energy loss. The methodology presented suggests a useful technique for tribological research.     

Energetics of Plastic Deformation of Metastable Austenitic Stainless Steel

The change in the internal energy during uniaxial tensile deformation of austenitic stainless steels EN 1.4301 (AISI 304) and EN 1.4318 (AISI 301LN) was determined by measuring the extent of γ→α'‐martensite transformation and the temperature increase of the samples. From the results the fraction of the stored energy of cold work and the free energy change related to the strain‐induced γ→α'‐martensite transformation were determined. The fraction of stored energy varied around 0.4. With the metastable steel grades the free energy change related to the γ→α'‐martensite transformation was found to vary between ‐98 MJ/m³ and ‐206 MJ/m³ depending on the austenite stability of the steel. Furthermore, the magnitude of the mechanical driving force was estimated by comparing the results with the free energy change of thermally induced transformation.     

Performance Characteristics of a Drying Heat Pump Using Superheated Steam

A complete mathematicalhumerical model is proposed, in order to simulate the performance characteristics of a novel concept of a drying heat pump based on the theory of minimum energy cyclcs. The drying heat pump involvcs vapour condensation in a Lava1 nozzle. removal of the liquid phase in a supersonic separator as well as compression of the working medium. which is superheared vapour.     

三脉冲不等强度激光片光源的研制及应用

本文报道了最近研制成功三脉冲不等强度调Q红宝石激光片光源系统.利用小颗粒对片光源90°方向的散射光对动态颗粒场进行高速摄影,从底片中能够精确直观地判断微小颗粒的瞬时分布、运动方向、速度和加速度情况.     

国外柴油机用粉末冶金气门阀座概述

概述了国外粉末冶金气门阀座的制造工艺特点,简要介绍了国外柴油机用粉末冶金气门阀座材料的性能水平。