最值求解技巧:巧变四数

在用基本不等式求最值时,大家都熟悉一个口诀:"一正二定三相等",但是有许多学生在怎样保证定值和相等时不知道该如何变形.为了解决学生的困难和困惑,我根据自己的经验,概括为两句口诀:"一正二定三相等,巧变四数定乾坤".     

聚合物-金属界面相形貌的研究

环氧树脂在 Al 合金表面生成纤维状的界面相结构,其形成、发展和特征与树脂的体系、交联反应条件以及 Al 合金的表面状态有关。环氧树脂的基础相为颗粒状的超结构组织。聚合物界面相的力学破坏表现为纤维体的拉伸、变形和断裂,而基础相在纯剪切受力时出现在45°方向的裂纹,并发展导致连接层的破坏。     

一种环氧树脂阻尼灌封胶的热氧加速老化研究

研究了某种环氧树脂阻尼灌封胶在热氧老化的作用下分子结构、硬度、断面形貌以及动态力学性能随时间的变化．傅立叶红外光谱图表明，所制备的样品环氧基团反应比较完全，热氧老化后试样表面由仲胺和环氧基团形成的酯键发生了部分断裂和氧化；邵氏硬度的增加、瓦向高温区移动则表明在老化过程中复杂的固化反应仍然继续进行；最大损耗因子（tanδmax）波动较小表明试样老化后分子结构几乎保持不变；SEM图片显示试样的冲击断裂由老化前的韧性转变为老化后的脆性断裂．     

未结盟大学的联盟

通过梳理管理学界对战略联盟的定义，发现价值链的鸸释同样适用于大学问的战略联盟。通过对已有的大学战略联盟的分析，提出了名校联盟与非名校联盟间的若干差异，最后提出了我国大学联盟战略的若干建议。     

从事放射性个人剂量监测分析与防护调查

为了能及时了解放射性工作人员的受照剂量，以便能够更好地保障放射工作人员的健康与安全，采用热释光测量法对包头地区从事放射性工作的工作人员进行了个人剂量监测，并对他们的剂量当量频数分布进行了统计与分析，对工作环境的防护进行了调查对比，就今后的工作提出建议。     

Mining for trigger events with survival analysis

This paper discusses a new application of data mining, quantifying the importance of responding to trigger events with reactive contacts. Trigger events happen during a customer’s lifecycle and indicate some change in the relationship with the company. If detected early, the company can respond to the problem and retain the customer; otherwise the customer may switch to another company. It is usually easy to identify many potential trigger events. What is needed is a way of prioritizing which events demand interventions. We conceptualize the trigger event problem and show how survival analysis can be used to quantify the importance of addressing various trigger events. The method is illustrated on four real data sets from different industries and countries.     

端羟基聚二甲基硅氧烯改性环氧树脂

用羟基封端的聚二甲基硅氧烷改性环氧树脂，得到具有两相结构的改性树脂，其耐热性明显提高．环氧树脂／有机硅（20／80）共混物涂层有很低的表面能，主要的机械性能则变化不大，可作为一种疏水性防护徐层．     

聚六亚甲基碳酸酯二醇增韧环氧树脂的结构与性能

采用羟基封端的脂肪族碳酸酯－聚六亚甲基碳酸酯二醇对环氧树脂进行了增韧，通过扫描隧道显微镜，扫描电子显微镜，差示扫描量热分析以及动态力学性能分析等方法研究了增韧ＥＰ的结构与性能的关系。     

Durability of hygrothermally aged graphite/epoxy woven composite under combined hygrothermal conditions

The objective of this study was to examine the effects of hygrothermal aging on the durability of a graphite/epoxy woven composite material system. The study was part of a larger project in which the objective was to evaluate and model the effects of moisture, temperature, and combined hygrothermal conditions on the strength and life of a graphite/epoxy woven composite material system. The results presented here represent an extension of the work by Patel and Case (Int. J. Fatigue 22 (2000) 809).

The hygrothermal aging consisted of cyclical temperature and moisture variations which were meant to simulate mission conditions for an advanced subsonic aircraft. Durability studies were carried out on the aged material system in the form of fatigue and residual strength testing under humid and elevated temperature environments. Damage mechanisms and failure modes were determined through fatigue testing, residual strength testing, and nondestructive evaluation.

Changes in physical appearance, thermal analysis results, fracture surfaces, and moisture diffusion behavior all supported the idea that the material was affected by the aging process. However, experimental testing also showed that the initial and residual tensile properties of the aged material were virtually unaffected by the imposed environmental aging (as compared to unaged material testing results), except when tested at elevated temperature. At elevated temperature, both the dynamic stiffness and residual strength were noticeably reduced from that at room temperature.     

利用高酸值餐饮废油脂制备生物柴油

以高酸值餐饮废油脂为原料,在酯化反应后再经两步酯交换反应制备生物柴油。在酯化反应中添加吸水剂可降低油脂的酸值,经一次酯化反应即可将油脂的酸值降至2m g/g左右,满足酯交换反应的要求。考察了酯化反应中吸水剂的添加方式、种类及其用量对酯化反应的影响,以及酯交换催化剂的种类及用量对脂肪酸甲酯(FAME)收率和产物组成的影响。实验结果表明,以凹凸棒土为吸水剂(用量为餐饮废油脂中游离脂肪酸质量的3%),且在酯化反应30m in时加入,酯化效果较好;以质量比为1∶1的NaOH和KOH混合物为催化剂进行两步酯交换反应时,催化剂的最佳用量依次为1.00%和0.75%(质量分数,基于油脂的质量),FAME收率最高达到96.33%。