纯铝等径角挤技术（I）——显微组织演化

研究了纯铝在 3种 (A、B和C)不同等径角挤工艺中的显微组织演化。结果表明 :纯铝经过等径角挤压变形后 ,其显微组织特征与加工路线有很大的关系。提出了立方元素扭转模型 ,分析了 3种不同加工路线的剪切面和剪切方向 ,较好地解释了采用 3种不同路线挤压后材料显微组织的演化规律。在路线C(各道次挤压间试样旋转 180°)中 ,每次挤压样品总是在相同的剪切面上发生剪切 ,每相邻道次之间的剪切方向相反 ,前一次变形产生的剪切应变被随后紧接着的下一次挤压所抵消 ,这导致了多余的剪切应变 ;在路线A(各道次挤压间试样不旋转 )中 ,有两个相交成 6 0°的剪切面 ,剪切交替地在两个剪切面上进行 ;在路线B(各道次挤压间试样旋转 90°)中 ,存在 4个不同的剪切面和剪切方向 ,挤压交替地在 4个剪切面上进行 ,X ,Y和Z平面上的晶粒都发生了剪切 ,这有利于等轴晶结构的形成     

Effects of blending on surface characteristics of copper corrosion products in drinking water distribution systems

Copper scales formed over 6-months during exposure to ground, surface and saline waters were characterized by EDS, XRD and XPS. Scale color and hardness were light red-brown-black/hard for high alkalinity and blue-green/soft for high SO₄ or Cl waters. Cl was present in surface or saline copper scales. The Cu/Cu₂O ratio decreased with time indicating an e transfer copper corrosion mechanism. Cu₂O, CuO, and Cu(OH)₂ dominated the top 0.5-1 A° scale indicating continuous corrosion. Cu₂O oxidation to CuO increased with alkalinity, and depended on time and pH. Total copper release was predicted using a Cu(OH)₂ model.     

等误差直线逼近非圆曲线节点计算新方法

传统的等误差直线逼近法从被逼曲线的端点开始计算节点.文章在此基础上提出一种非圆曲线节点计算新方法,以被逼曲线曲率半径最小点开始,按等误差法求取节点,再根据曲线规律对节点重新进行排序,输出节点坐标值.用该种方法逼近曲线,在逼近误差等于等误差法逼近误差的条件下,节点数少于等误差法求得的节点数,文中用C语言编写新方法求取节点程序,并与传统方法进行比较,最后用曲线方程进行验证,结论正确,具有实际意义.     

Monte-carlo modeling of grain growth in Zr equal channel angular pressed and recrystallized

Grain boundary character distribution in equal-channel-angular pressed Zr was studied. Using a die design of 90°/20° and an operation temperature of 350°C. The initial grain size of 20 μm was reduced to about 270 nm with 4 passes via route B_c. The grain growth kinetics of the recrystallized state was obtained by experiment and Monte-Carlo computer simulation, respectively, which showed good agreement. Based on kinetics and morphological characteristics, it was concluded that the grain coarsening mechanism was governed by normal grain growth. No sign of abnormal grain growth was detected either in the experiment or in simulation despite taking into consideration anisotropy in grain boundary energy as well as its mobility. This indicates that grain boundaries produced by severely deformed Zr are stable against explosive coarsening. The evolution characteristics of the microstructure in the present ECA pressed and recrystallized Zr differed from those of cold rolled Ti in that the grain boundary misorientation distribution and texture were rather stable during grain growth. Jointly Appointed by the Center for Advanced Aerospace Materials This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

工业纯Al的缝隙腐蚀再钝化电位

工业纯Ａｌ的缝隙腐蚀再钝化电位ＥＲ是缝隙结构的特征值，与缝隙腐蚀下限电位ＶＣＲＥＶ一致，比孔蚀电位负约１００ｍＶ，说明缝隙腐蚀更易发生．     

中原油田-曲阜-济南天然气管道工程沿线土壤腐蚀性评价

依据SY／T0007—1999《钢质管道及储罐腐蚀控制工程设计规范》对中原油田-曲阜-济南天然气管道工程沿线土壤进行了腐蚀评价，指出该管道沿线土壤以中强性腐蚀为主，文章对土壤腐蚀评价过程进行了较详细的介绍。     

水下隧道穿越管道保护效果测试评价

本文通过对四川气田北干线涪江隧道穿越管道阴极保护电参数的现场测试，取得了实际可信的基础数据，验证了处于水下隧道洞内的穿越段管道，能得到陆上强制电流阴极保护系统的有效保护，保护电流所必经的岩石层和锚喷钢筋混凝土层对保护电流没有构成屏蔽的结论，对管道工程设计和运行管理具有指导作用。     

用兰纳-琼斯位能和单参数Wilson方程预测汽液平衡

根据兰纳-琼斯位能提出计算Wilson方程中同类分子间能量参数gii的一个简便方法,用于单参数Wilson方程可成功地预测二元体系气液平衡,预测精度与已有方法相当,且仅需要纯物质的Tc,Pc,Zc数据。     

Reactant induced restructuring and corrosion of germanium-palladium catalysts during hydrogenation reactions

An anomalous rate enhancement with increasing conversion has been observed during the liquid phase hydrogenation of nitrobenzene and crotonaldehyde over Ge/Pd/C catalysts at ambient temperature and atmospheric pressure. Inductive coupled plasma atomic emission spectroscopy and electrochemical measurement of the oxidation state of catalysts during reaction revealed that the bimetallic particles were partially oxidized by the reactants, which resulted in Ge-dissolution and increased exposure of Pd on the surface. It is proposed that the surface and bulk composition of Ge/Pd catalysts are a function of their oxidation state. This behaviour is due to the unusually high mobility of Ge in the Pd lattice and to the good solubility of GeO₂ in polar solvents. The influence of hydrogen transport on the corrosion process and the stability of other X/Pd type bimetallic catalysts during liquid phase hydrogenation are also discussed.     

脱氯工序pH值和ORP的影响因素

介绍了离子膜烧碱装置中空气吹除脱氯和真空脱氯工艺。分析了正常脱氯操作条件下影响其pH值和氧化还原地位（ORP）的因素，提出了控制措施。