Mechanical degradation of coating systems in high temperature cyclic oxidation

Cyclic oxidation tests were performed on a large variety of commercially available overlay coatings. The results of cyclic oxidation tests confirmed that the composition of the coating as well as the processing method of the coating can affect the life of the system. Coating life was determined by the time to coating penetration and initiation of substrate attack. As this work was part of a effort to evaluate the relative protectiveness of available coating systems for Industrial Gas Turbine applications at relatively high temperature, an extensive testing programme was undertaken. The different coatings were tested to visual failure. The results presented in this paper concentrate on the surface instability of the coating. Apart from usual oxidation of the coating an additional degradation mechanism was observed. A mechanical effect caused by the instability of the coating as a result of the difference in the thermal coefficient of expansion and mechanical properties between the substrate and coating. This effect, the so-called “rumpling” effect, resulted in a significant reduction in time to penetration and was in some systems the life controlling factor.     

氯化铁催化合成富马酸二甲酯

氯化铁可代替硫酸催化酯化反应，探讨了氯化铁催化合成富马酸二甲酯的条件，操作简便，反应温和，无腐蚀，减少了污染与产品纯化。     

Alkali-metal Na Adsorption and Promoted Oxidation on Si(100)2×1 Surface

The alkali-metal Na adsorption on Si(100)2×1 surface and its promoted oxidation and Si oxidegrowth have been investigated by means of thermal desorption,work function,Auger electronspectroscopy and photoemission electron spectroscopy.The experimental data showed that therewas a new state,interface electron state,near the Fermi level after the deposition of Na atoms.It wasfound that the presence of Na always caused an increase of the oxygen initial uptake whereas thepromotion of Si oxide growth was observed only at the coverage of Na greater than 0.5 ML.A newmechanism of Na-promoted Si oxide growth is suggested in this paper.     

聚合铝生产工艺研究

以铝矿为原料，在常压下，采用两段溶出法，对聚合铝的合成工艺进行了系统研究。     

Storage Stability of Antioxidant-Washed Myofibrils From Chicken White and Red Muscle

Oxidation and gel-forming ability of chicken white (breast) and red (leg) muscle myofibrillar proteins during storage at 0°C were examined. Breast myofibril gels exhibited greater shear moduli than leg myofibril gels throughout 8 days storage. Shear moduli of both breast and leg gels in the intermediate temperature zone (45–55°C) decreased during storage, but at >55°C, they either increased or remained unchanged. Lipid oxidation was inhibited by washing myofibrils with antioxidants propyl gal-late, ascorbate, and tripolyphosphate. However, these antioxidants did not affect the content of protein carbonyls, and only slightly decreased the amine content during storage. Storage affected the kinetic process of myofibril gelation independently of antioxidant treatments.     

乙烯氧化制环氧乙烷固定床反应器的模拟及稳定性分析

在筛选出合适的乙烯氧化制环氧乙烷动力学方程的基础上,对工业固定床氧化反应器进行一维和二维模型的模拟计算。考察操作工艺参数对反应器稳定性、转化率影响的敏感性以及N_2和CH_4做致稳气时反应温度和转化率的轴向、径向分布。     

丙烯酸酯单体对聚氯乙烯密封胶粘剂的改性作用

丙烯酸酯有较大的反应活性，能与聚氯乙烯发生接技共聚反应。本文中，我们着重研究不同结构丙烯酸酯单体对聚乙烯基密封胶粘剂的改性作用。以PVC为100份，分别加入甲基丙烯酸一缩二乙二醇双脂（DEGDMA），甲基丙烯酸乙二醇双酯（EGDMA）和丙烯酸一缩二乙二醇双酯（DEGDA）各为10份、20份、30份的试验结果看出，随着丙烯酸酯单体添加量的增加，PVC片基的硬度增大，拉伸强度提高，而伸长率降低。不同的单体其影响也不同。就硬度和拉伸强度有EGDMA＞DEGDA＞DEGDMA的规律伸长率的降低则为DEGDMA＞DEGDA＞EGDMA。就丙烯酸…     

KCl与NaCl在低盐固态法酱油发酵中的应用比较

对KCl与NaCl在低盐固态酱油发酵中的应用进行了比较研究。结果表明：用KCl代替NaCl，KCl的浓度要高于NaCl才能抑制发酵期间杂茵的污染，且使用KCl的发酵效果比NaCl要好。     

Validation of a Method of Determination of Apparent Diffusivity Versus Composition in Solids

A method is presented for computing the values of apparent diffusivity in solids with respect to the concentration of the diffusing substance (water or sodium chloride). This method does not require any assumption upon the mathematical relationship between diffusivity and concentration. It can be applied to experimental measurements of local concentration versus position within the solid (profiles) with relatively few measurements (circa 10) and a mathematical smoothing of the experimental data by using an artificial neural network model. The method was first validated on simulated data obtained by using a constant diffusivity value and on experimental profiles when the relation between diffusivity and concentration was given. It was then applied to original experimental moisture profiles obtained by putting gelatin gels with different initial moisture contents into contact for up to 14 days. The method was also successfully applied to five sets of experimental moisture and sodium chloride profiles taken from the literature and obtained from different food products. Apparent diffusivities calculated by our method were found in agreement with those obtained by authors using different numerical methods to compute the diffusivity values.     

示波极谱滴定法测定工业氯化钙主要成份

在氯化铵-氨水(pH=11)支持电解质中用微银汞膜电极进行试验,锰、铁不干扰测定,用EDTA滴定氯化钙获得令人满意的结果。对三种样品进行分析,变异系数为0.08％—0.11％。该法快速准确,适用于氯化钙主要成份的测定。