木质素单体模化物的热解与产物分析

采用苯酚、邻苯二酚、愈创木酚和紫丁香酚为木质素单体模化物,利用两段裂解反应器-在线气相色谱仪（GCs）进行热解实验和产物分析,采用多色谱柱对无机气体（IGs）、C₁~C₅烃（C₁~C₅ LHs）、非芳基含氧化合物、酚和芳烃进行定量分析,以确定羟基和甲氧基对木质素热解过程中开环反应及产物分布的影响. 结果显示：羟基和甲氧基可以提高模化物的转化率,且羟基和甲氧基的存在影响芳基开环反应、芳基取代反应和重排反应间的竞争关系,使热解产物分布存在明显差异. 4种模化物热解产物主要是芳环的开环反应产物,包括IGs（质量分数为27.29%~33.56%）和C₁~C₅烃（20.46%~39.51%）. 一氧化碳产率（23.82%~29.18%）随羟基数增加而升高,随甲氧基数增加而降低;二氧化碳产率（0.19%~9.61%）随甲氧基数增加而升高. 羟基和甲氧基的存在降低了C₁~C₅烃的质量选择性,促进了烷基苯、大分子化合物和焦炭的形成.     

WAVE FIELD EXTRAPOLATION IN VISCOELASTIC MEDIUM AND VARIABLE FOCUS METHOD TO SEPARATE SEISMIC COMPOUND WAVE

ＷＡＶＥＦＩＥＬＤＥＸＴＲＡＰＯＬＡＴＩＯＮＩＮＶＩＳＣＯＥＬＡＳＴＩＣＭＥＤＩＵＭＡＮＤＶＡＲＩＡＢＬＥＦＯＣＵＳＭＥＴＨＯＤＴＯＳＥＰＡＲＡＴＥＳＥＩＳＭＩＣＣＯＭＰＯＵＮＤＷＡＶＥ￥ＳｏｎｇＳｈｏｕｇｅｎ；ＹｕａｎＸｉｕｇｕｉ；ＨｅＪｉｓｈａｎ...     

化工过程熵增指数及其在磷复肥清洁生产评价中的应用

从热力学第二定律出发, 指出清洁生产的热力学本质是控制物质由有序结构向无序转化并从中获取最大效益, 其优劣可由过程熵增反映。 引用复杂体系非平衡定态过程最小熵产生原理,推导出依据与外界交换的物流和热流信息定量计算化工复杂系统过程熵增的方法, 并定义过程熵增指数ζ 。 评价了化工过程对环境热力学状态的综合影响。选择以硫和以氨为载能原料的磷复肥工艺为例进行了计算和对比,其过程熵增指数分别为6.753和4.571,反映出载能原料硫作为废物排放对环境热力学状态产生更大的影响。     

30%三唑锡悬浮剂的研制及作用机理分析

[目的]解决30%三唑锡悬浮剂分散稳定性的问题。[方法]为提高30%三唑锡悬浮剂分散稳定性,采用流点法对不同类型的分散剂进行初步筛选并测试表面张力,通过测试SC粒径、Zeta电势、悬浮率、流变性能确定分散剂配比与用量并对分散稳定机理进行分析。[结果]与单一分散剂制备SC相比,聚羧酸盐分散剂SD-816和聚氧乙烯醚磷酸酯分散剂SD-208复配体系制备的SC性能较优,其表观黏度、Zeta电势、粒径和悬浮率分别为386 mPa·s、-37.2 mV、2.58μm及98.4%。并且提出了聚羧酸盐分散剂和聚氧乙烯醚磷酸酯分散剂对农药三唑锡可能的分散机理。[结论]聚羧酸盐SD-816和聚氧乙烯醚磷酸酯SD-208的复配体系可同时提供静电排斥作用和空间位阻,明显改善SC体系的悬浮稳定性。     

SUL-151 Decreases Airway Neutrophilia as a Prophylactic and Therapeutic Treatment in Mice after Cigarette Smoke Exposure

Chronic obstructive pulmonary disease (COPD) caused by cigarette smoke (CS) is featured by oxidative stress and chronic inflammation. Due to the poor efficacy of standard glucocorticoid therapy, new treatments are required. Here, we investigated whether the novel compound SUL-151 with mitoprotective properties can be used as a prophylactic and therapeutic treatment in a murine CS-induced inflammation model. SUL-151 (4 mg/kg), budesonide (500 μg/kg), or vehicle were administered via oropharyngeal instillation in this prophylactic and therapeutic treatment setting. The number of immune cells was determined in the bronchoalveolar lavage fluid (BALF). Oxidative stress response, mitochondrial adenosine triphosphate (ATP) production, and mitophagy-related proteins were measured in lung homogenates. SUL-151 significantly decreased more than 70% and 50% of CS-induced neutrophils in BALF after prophylactic and therapeutic administration, while budesonide showed no significant reduction in neutrophils. Moreover, SUL-151 prevented the CS-induced decrease in ATP and mitochondrial mtDNA and an increase in putative protein kinase 1 expression in the lung homogenates. The concentration of SUL-151 was significantly correlated with malondialdehyde level and radical scavenging activity in the lungs. SUL-151 inhibited the increased pulmonary inflammation and mitochondrial dysfunction in this CS-induced inflammation model, which implied that SUL-151 might be a promising candidate for COPD treatment.     

复合变质处理对铸造热锻模具钢力学性能的影响

研究了变质处理对铸造热锻模具钢力学性能的影响。结果表明：在相同热处理条件下，经RE和RE—Nb复合变质处理后，其冲击韧性与变质处理前相比分别提高了9．7和14．5J／cm^2，常温抗拉强度σb分别提高了82和234MPa，高温抗拉强度分别达到了976和994MPa，而硬度变化不大。     

MICROSTRUCTURE OF RAPIDLY SOLIDIFIED TiAl ALLOY POWDER

The rapidly solidified powder of Ti-34Al-2Mn alloy was obtained by means of ultrasonicgas atomisation (USGA) technique.The tupical size of the powder is 27 μm.X-ray diffractionresults show that the powder consists of major α_2-phase and minor γ-phase.Under opticalmicroscope both equiaxed and dendritical microstructure features were observed on RS pow-der sections.After annealing at 900 ℃/for 2 h in vacuum,most of α_2-phase transforms intoγ-phase,resulting in refinement of structure.     

BEHAVIOR OF Mg AND ITS EFFECT ON MECHANICAL PROPERTIES OF CAST Fe_3Al ALLOYS

Proper addition of 0.002 wt-% Mg to cast Fe_3Al alloy may obviously improve the room andhigh temperature tensile properties.Auger spectra show that Mg segregates near grainboundaries as very thin layers.Observation under TEM reveals that a suitable amount of Mgenhances ability of cooperative internal deformation so that the dislocations will ease the con-tinuous slip deformation through grain boundaries.The fracture feature of Fe_3Al alloy is oftransgranular cleavage at room temperature and cracks initiate at grain boundaries.     

硼对快凝Ni3Al组织结构及力学性能的影响

本文通过快凝及加硼合金化的方法改善金属间化合物Ni_3Al的韧性。实验表明:加入0.5-1.4at.-％的硼对Ni_3Al的塑性提高最有利。结构分析表明:在含1.37at.-％硼的Ni_3Al中,硼以Ni_(23)B_6弥散相及晶界偏聚方式存在;当硼量增至2.22at.-％时,硼以粗大的Ni_(23)B_6及NiB_(12)相在晶界处析出。无硼的Ni_3Al晶界为大角度晶界;当硼加至1.37at.-％时,Ni_3Al晶界以位错排列成亚晶界,以小角晶界形式存在。     

化合物TbMn6Sn6的磁性和磁相变

采用分子场理论模型对稀土-过渡族金属间化合物的磁性、自旋重取向相变和场诱导的一级磁相变进行了研究.从理论上计算了TbMn6Sn6的易磁化方向随温度的变化以及不同温度时的磁化曲线,描述了自旋重取向相变和场诱导的一级磁相变.基于单离子模型计算了Tb离子和化合物的一阶和二阶磁晶各向异性常数及其随温度的变化,得到了和实验数据基本一致的结果.结果表明:Mn次晶格和Tb次晶格磁晶各向异性能之间的相互竞争是导致自旋重取向相变的物理机制,而稀土离子的四阶晶场项对场诱导的一级磁相变产生很大的影响.