LUBRICATION FILM FORMATION MECHANISM OF SLIPPER PAIRS IN LOW SPEED HIGH TORQUE HYDRAULIC MOTORS

Pressure-flow analytical formulas of lubrication film of slipper pairs on camshaft connect- ing rod type low speed high torque (LSHT) hydraulic motors are put forward. The bottom surface of slipper pairs is rectangle, and the effect of squeeze flow and pressure differential flow is considered. The dynamic process of lubrication film formation through squeezing is numerically studied by com- puter simulation. Effects of supply pressure, initial lubrication film thickness, velocity damping coef- ficient, loading impact and gravity, etc are studied. Advantages of novel slipper pairs with large oil cavity area are pointed out.     

试论川酒的特色

从川酒的历史文化、地域特色、传统技艺、风味特征和对白酒行业的贡献,阐述川酒的特色和魅力,增进消费者对川酒的了解.     

白藜芦醇糖苷类衍生物的设计与合成

以白藜芦醇及其类似物紫檀芪为原料,采用Schmidt成苷法、相转移催化法,分别与溴代糖和乙酰氨基糖反应,得紫檀芪乙酰葡萄糖苷和(E)-5,4'-二叔丁基二甲基硅基-3-(2"-乙酰氨基-3",4",6"-三乙酰葡萄糖二苯乙烯,其结构经红外光谱、核磁共振氢谱和质谱表征.     

Uterine Deletion of Bmal1 Impairs Placental Vascularization and Induces Intrauterine Fetal Death in Mice

Recently, it was demonstrated that the expression of BMAL1 was decreased in the endometrium of women suffering from recurrent spontaneous abortion. To investigate the pathological roles of uterine clock genes during pregnancy, we produced conditional deletion of uterine Bmal1 (cKO) mice and found that cKO mice could receive embryo implantation but not sustain pregnancy. Gene ontology analysis of microarray suggested that uterine NK (uNK) cell function was suppressed in cKO mice. Histological examination revealed the poor formation of maternal vascular spaces in the placenta. In contrast to WT mice, uNK cells in the spongiotrophoblast layer, where maternal uNK cells are directly in contact with fetal trophoblast, hardly expressed an immunosuppressive NK marker, CD161, in cKO mice. By progesterone supplementation, pregnancy could be sustained until the end of pregnancy in some cKO mice. Although this treatment did not improve the structural abnormalities of the placenta, it recruited CD161-positive NK cells into the spongiotrophoblast layer in cKO mice. These findings indicate that the uterine clock system may be critical for pregnancy maintenance after embryo implantation.     

煅烧温度对环保型莫来石多孔陶瓷结构和性能的影响

莫来石多孔陶瓷因其高强度和耐腐蚀等性能得到广泛地应用。然而,由于合成莫来石的原料高岭土的不可再生性及持续上涨的价格,寻找廉价易得的替代原料对于合成莫来石多孔陶瓷迫在眉睫。建筑废弃物的成分与高岭土相似,可作为高岭土的可行替代品之一。以建筑废弃物和Al₂O₃为主要原料,AlF₃为晶须催化剂,B₂O₃为烧结助剂,成功制备了环保型莫来石多孔陶瓷。通过阿基米德排水法、XRD和SEM等表征手段,深入探究了多孔陶瓷的晶相、微观形貌和物理化学特性。同时,研究了煅烧温度对莫来石多孔陶瓷结构和性能的影响规律及作用机制。结果表明,适当提升煅烧温度有助于莫来石晶须的生成,但过高的温度会导致晶须粗化和晶粒增大。当煅烧温度为1 200 ℃时,莫来石晶须的生长形貌最佳,晶须直径约为0.05—0.1 μm、长度为0.5—1 μm、长径比在15—20之间。随着煅烧温度增加,莫来石多孔陶瓷的开口孔隙率不断降低,抗折强度不断增强。当煅烧温度为1 200 ℃时,样品的开口孔隙率达到（61.78±0.72 ）%,抗折强度达到（3.74±0.46） MPa。因此,以建筑废弃物为主要原料可成功制备具有高气孔率的莫来石多孔陶瓷。本研究为建筑废弃物合成莫来石多孔陶瓷提供了可靠的理论支持,对降低生产成本及推动建筑废弃物资源化再利用等有重要理论价值和实际意义。     

黄河某水电站库区泥石流特征及工程影响研究

黄河某水电站库区泥石流沟道发育,对该水电站运行安全带来不利影响。结合国内外有关研究成果,根据库区内泥石流的具体特征,以杏儿沟、官亭沟和喇家沟为重点研究对象,分析研究了这几条沟泥石流的形成条件及运动特征,包括泥石流的流速、流量等,并将泥石流对工程的危害作出评价。研究成果对水电站建设具有重要指导意义。     

多功能油层保护剂JQD的研制与应用

针对新疆小拐油田裂缝-孔隙型储层特点,开发研制了一种新型的兼具防漏堵漏及油层保护功能的JQD处理剂。该处理剂具有较好的油溶率、酸溶率,与现有钻井完井液体系配伍性良好,加工粒径可调,对1—4mm的裂缝堵漏效果良好。动态损害实验表明,JQD体系的岩心渗透率恢复值不小于80％。现场试验三口表明,JQD与钻井液配伍性良好,防漏堵漏效果显著,性能调整及维护方便,起下钻及电测顺利。三口井投产后,两口井产量分别为30和28t/d,一口井产气量为1.1×10~4m~3/d,说明储层得到了有效的保护,实现了“堵得住、解得开”的目标。     

空气潜孔锤钻进技术在舜皇山基岩地热深井的应用

空气潜孔锤钻进技术不仅可以提高钻探效率,而且不损害地热储层,因此在地热井中的应用十分广泛,但是仍受到钻探深度和出水量的限制。在湖南永州舜皇山基岩地热深井钻探过程中,常规牙轮钻进与泥浆钻进工艺存在钻进效率低、堵塞储层、影响出水量的可能。应用空气潜孔锤钻进技术实现了钻探深度的突破,钻探深度达到1820 m,实际出水量400 m3/d,出水温度43 ℃,符合设计指标。本文总结了相应的钻进工艺措施,以期促进对该技术在地热深井中的推广应用。     

白涧铁矿南区复杂地层钻探施工技术

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。