建(构)筑物机械拆除方法综述

介绍了几种常用的建(构)筑物机械拆除方法,对其工作原理、特点、应用条件及局限性加以分析和说明。     

Feedback linearizing control of a fluidized bed reactor

The design of an adaptive nonlinear controller for the control of a fluidized bed reactor is derived by using exact linearization techniques. Reset action and parameter adaptation are used to make more robust the precise compensation of nonlinear terms, which is called for in the linearization technique. A nonlinear antiwindup mechanism is introduced to handle reset windup problem and to provide fast response without large overshoot. Simulation results show that the proposed adaptive controller guarantees good setpoint tracking. The developed estimation algorithm allows accurate estimation of the parameters for which the regressor component is not zero.     

多孔挡板流化床还原UO3反应器模型的研究

针对ＵＯ＿３的Ｎ＿２还原反应建立了多孔挡板流化床反应器模型。将多孔挡板床的每一级视为具有相似的流动状态，每一级的上、下段称为稀、密相段，分别用鼓泡床和活塞流模型描述。该模型的计算值与￠６３ｍｍ的多孔挡板床Ｈ＿２还原ＵＯ＿３的热态实验值能较好的吻合。还预计了还原温度、操作气速和挡板结构参数对固相转化率的影响，为该类反应器的工业设计、放大和优化提供了依据。     

Influence of adsorption on the measurement of diffusion coefficients by Taylor dispersion

The effect of adsorption on the measurement of diffusion coefficients by the Taylor dispersion technique is investigated by modifying the governing equation to account for reversible, nonequilibrium adsorption. The resulting two-dimensional equations are solved by an explicit finite-difference technique. Experimental data for the acridine carbon dioxide system indicated that acridine adsorbs on the walls on the tubing and these data were investigated with this model. The influence of carious parameters including the number of sites and the rates of adsorption desorption was investigated by conducting a parametric sensitivity analysis on the model. It was found that adsorption of the solute on the wall of the tubing could produce an error as high as 35% on the measured diffusion coefficient compared to the actual diffusion coellicient. Examination of the influence of each of the parameters will enable Inure investigators to reduce the effect of adsorption in the measurement of diffusion coefficients by Taylor dispersion.     

管外上升R－113流体的沸腾换热试验

详细介绍了Ｒ－１１３流体管外上升流动的沸腾换热试验，包括试验台架、流量计和温度测量的修正，以及试验数据。拟合的换热关系式为ｑ＝５２８（Ｔｗ─Ｔｓ）１．３３。     

Velocity Profile in Fixed Beds: A Study on the Representativeness of the Experimental Measurement of Downstream Flow Characteristics

Although considerable progress has been made in the development of experimental techniques for investigating velocity distribution inside a fixed bed, these techniques were limited to special cases. Consequently, the velocity distribution is normally measured at downstream of the fixed bed and then this measurement is considered to be representative for the flow inside the bed. To evaluate the representativeness of this technique, this work presents a study of the change in the flow characteristics, starting from the boundary of the fixed bed within the pipe to a downstream position where the experimental measurement is taken, by using simulations based on computational fluid dynamics methods.     

硅化腐植酸钠GFN-1的研制

针对目前生产腐植酸硅化产品原料受限的缺点,在大量试验的基础上,确定了一条以腐植酸和硅化剂为主要原料的生产工艺,合成了一种与有机硅腐植酸钾(OSAM-K)性能相当的硅化腐植酸钠产品GFN-1,对其常规性能指标和在清水及无固相聚合物钻井液体系中、在膨润土浆和低固相钻井液体系中应用指标,耐温性能进行了对比实验。实验结果表明,GFN-1作为钻井液添加剂,具有良好的降滤失、降黏、耐温及热稳定性,并兼有优良的控制页岩分散能力,其大多数应用性能相当于或略优于OSAM-K,作为替代品完全能够满足油田现场应用的需要。GFN-1的硅化原料性质稳定、来源广泛,生产工艺简单易行,产品质量稳定,具有较好的推广价值。     

Ultrasonic nondestructive evaluation of fibre-reinforced composite materials — a review

A framework is presented for examining the effectiveness of limiting and modelling arguments used in the analysis of fluid flows. It consists of examining the consequences of the arguments on the flow problem as a whole and breaking down the limiting/modelling process into a sequence of steps and associated sequence of flow problems, termed here as ‘lidels’. The notion of validity of lidels is given. Several examples are given to explain the present approach. Invited general lecture at 3rd ACFM, Tokyo, September 1986     

Characterization of Tomato Pulp Stickiness during Spray Drying using a Contact Probe Method

A contact probe test was developed to characterize the surface stickiness of a tomato pulp droplet at various moisture contents and temperatures. To provide tomato pulp samples with different moisture contents, tomato powder produced by a laboratory spray dryer was wetted to seven different moisture levels. The instantaneous tensile force curve was recorded during the probe withdrawal from which the maximum tensile force and other useful information were obtained and cross-examined against images of bonding, debonding, and failure of the material. Generally, at higher moisture contents tomato pulp exhibited cohesive failure followed by semi-adhesive failure, but when moisture content decreased to a certain level, a peak tensile pressure was observed and the failure was adhesive. In addition, higher temperatures shifted the points of adhesive failure toward lower moisture content.     

Drying Characteristics of Barley Grain Dried in a Spouted-Bed and Combined IR-Convection Dryers

A study was performed to determine the drying characteristics and quality of barley grain dried in a laboratory scale spouted-bed dryer at 30, 35, 40, and 45°C and an inlet air velocity of 23 m/s^-1, and in an IR-convection dryer under an infrared radiation intensity of 0.048, 0.061, 0.073, and 0.107 W cm^-2 at an air velocity of 0.5 m/s^-1. The results show that the first, relatively short, phase of a sharp decrease in the drying rate was followed by the phase of a slow decrease. The time of barley drying depended on temperature of inlet air in a spouted-bed dryer and on radiation intensities in an IR-convection dryer. Barley drying at 45°C in a spouted-bed dryer was accompanied by the lowest total energy consumption. The average specific energy consumption was lower and the average efficiency of drying was higher for drying in a spouted-bed dryer. The effective diffusivities were in the range 2.20-4.52 × 10^-11 m² s^-1 and 3.04-4.79 × 10^-11 m²/s^-1 for barley dried in a spouted-bed and in an IR-convection dryer, respectively. There were no significant differences in kernel germination energy and capacity between the two drying methods tested.