4-甲氧基-N-(2-N,′N′-二甲基氨基乙基)-1,8-萘酰亚胺烯丙基缩水甘油醚季铵盐的合成与光学性质

以4-B r-1,8-萘酐为起始原料,合成得到标题化合物,中间体及产物的结构采用质谱、核磁共振氢谱等测试技术进行了结构表征。对该荧光单体的紫外光谱、荧光光谱等性质进行了初步的研究。     

Y_2P_4O_(13):Eu~(3+)荧光材料的制备及其性能

采用湿化学法制备了Eu~(3+)掺杂Y_2P_4O_(13)荧光材料,通过X射线粉末衍射(XRD)、傅里叶变换红外光谱(FT-IR)和荧光光谱(FL)等手段表征制备产物的物相结构、荧光性能,并对合成原料中稀土与磷的比例(n(Y+Eu)/n(P))和pH调节剂种类对制备样品的物相结构及性能的影响进行分析。结果表明:合成原料中n(Y+Eu)/n(P)比值和pH调节剂种类直接影响着制备产物的物相结构与性能。在n(Y+Eu)/n(P)=12.1、以NH_4HCO_3为pH调节剂调节pH为6的条件下可获得正交晶系的Eu~(3+)掺杂Y_2P_4O_(13)荧光材料。所制备的Y_2P_4O_(13):2at%Eu~(3+)荧光材料在395nm光的激发下可发射出橙红光。     

真空紫外辐照对Lumogen薄膜损伤及光学性能的影响

为研究Lumogen(C22H16N2O6)薄膜在真空紫外波段的光致发光特性及辐照损伤,采用热阻蒸发法,以氟化镁为基底制备Lumogen薄膜.使用真空紫外荧光光谱仪、原子力显微镜(AFM)、扫描电子显微镜(SEM)、紫外?可见分光光度计等仪器分别对薄膜的光致发光特性、荧光强度衰减变化、表面形貌、透过率等进行测试与表征....     

木质素碳量子点在防伪包装中的应用研究

目的 探索木质素碳量子点(CQDs)荧光油墨及其书写式标签、CQDs/聚乙烯醇(PVA)复合荧光薄膜在防伪包装中的应用潜力。方法 以木质素为碳源,采用一锅水热法得到未掺杂碳量子点O-CQDs和硫掺杂碳量子点S-CQDs,并以此为荧光填料,以乙醇、乙二醇和丙三醇的混合液为溶剂,制备荧光油墨及其书写式荧光标签和CQDs/PVA复合荧光薄膜,探索其荧光防伪性能。结果 硫掺杂木质素碳量子点油墨MS-CQDs及其书写标签、PVA复合薄膜在可见光下均无色,在365 nm紫外光照下则呈现强烈的淡蓝色荧光。结论 MS-CQDs书写式称量纸荧光标签及其与PVA的复合薄膜均具有良好的荧光性能,在荧光防伪领域具有良好的应用潜力。     

荧光灯自动调光系统的研究

在图书馆、博物馆等大型场所,恒亮度的照明系统具有非常广泛的应用前景.利用光敏电阻作为光强采集元件,建立了一种能够根据外界光强自动调节灯功率的照明系统,并介绍了自动调光电路的系统框图,包括光敏电阻测试电路、调光电路等.主要针对光敏电阻的Pspice模型、荧光灯模型和调光理论进行了理论分析.仿真结果表明了上述理论的正确性,该系统能够保证室内的恒亮度控制.     

咪唑类荧光材料的合成与发光性能研究

一锅法合成了5种三元取代咪唑类荧光化合物,对所合成的全部化合物的结构进行了表征。刚性结构和共轭结构是影响物质荧光性能的两个重要参数,利用密度泛函理论方法(GGA/BP)得出了分子的平衡结构,计算了咪唑环4,5位上两个苯环的二面角。首次利用分子模拟手段从理论上分析了化合物的荧光性能,为探讨不同的取代基对整个分子刚性结构的影响提供了理论依据。通过紫外光谱、荧光发射光谱探讨了这些物质的荧光发射波长,斯托克斯位移,荧光量子收率等荧光参数。     

Live‐Cell Imaging with Water‐Soluble Aminophenoxazinone Dyes Synthesised through Laccase Biocatalysis

Aminophenoxazinone dyes with variable water solubilities were assayed for the first time in a live‐cell imaging application. Among a library of ten sulfonylated chromophores, one compound gave excellent results as an endocytic marker, showing a precise subcellular distribution. The compound was compared to four commercial vital tracers, including Lucifer Yellow. The first laccase‐mediated regioselective synthesis of a diphosphorylated 2‐aminophenoxazinone dye was also described. This compound, water‐soluble at 10^?2 M , displayed modest fluorescence properties and the ability to complex Mg²⁺ and Ca²⁺ cations, therefore giving fluorescence quenching.     

Spectrophotometric investigation of the copolymerization of styrene or methyl methacrylate with 1,8‐naphthalimide dyes

The copolymerization of styrene or methyl methacrylate with 1,8‐naphthalimide dyes to yield fluorescent side‐group copolymers was investigated. During copolymerization, no changes occurred in the chromophoric systems of the dyes. Colorimetrically, it was found that more that 0.90% of the dyes were chemically bonded to the polymer chain. The effect of polymer coloration was proven by appropriate coloristic characterization. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2463–2470, 2001     

Fluorescent Hydrogel–Textile Composite Material Synthesized by Photopolymerization

A fluorescent textile sensor and its capacities to detect pH changes in aqueous solutions have been reported. A new hydrogel-cotton fabric was obtained via surface initiated photopolymerization of 2-aminoethylmethacrylate hydrochloride, with N,N′-methylene-bis-acrylamide as a crosslinker, and fluorophore and modified eosin Y and N-methyldiethanolamine as photoinitiators. The synthesis of the modified eosin Y and a new 1,8-naphtalimide used as signal units in the hydrogel composite have been described. It has been found that the concentration of the photoinitiator affects the functional properties of the composite. pH variations influence the gel structure and this is transduced into fluorescence and color changes of the material.