Process optimisation in sunflower oil extraction by supercritical CO2

A continuous process for the extraction of sunflower oil using supercritical CO₂, featuring multiple extractors, one oil separator and three cascaded CO₂ recovery vessels operating at different pressures, was devised and studied. For every single equipment of the plant making up the process a mathematical model was built. Experimental tests—consisting in measurements of oil solubility in supercritical CO₂—were carried out in a laboratory-scale apparatus to characterise the behaviour of sunflower oil in the separation from the supercritical fluid. The mathematical model of the whole process was coded in the commercial gPROMS process modelling environment where both its simulation and optimisation—this latter assuming the overall oil production cost as the objective function—were carried out. The process- and economics-related results are discussed and compared with those obtained with traditional and cold-pressing extraction.     

Properties of Edible Films from Total Milk Protein

The mechanical properties and water vapor permeability of edible films made from various total milk proteins (TMPs) were investigated. Two TMPs obtained from nonfat dry milk (NDM) by removing lactose and three TMPs obtained from a commercial source were studied. Lactose was extracted from NDM by ultrafiltration or suspension in ethanol followed by filtration. TMP concentrate obtained by ultrafiltration (UF) produced films with the lowest water vapor permeability (WVP) and the highest tensile strength at break. Commercial TMP concentrates produced films more ductile than those from the UF-TMP or retentate from ethanol extraction. Further research is needed to improve mechanical properties of UF-TMP films without increasing the WVP.     

Evidence for biotic control of Australian reservoir phytoplankton communities and the potential for applied biomanipulation

Although some concerns have been expressed with respect to the applicability of biomanipulation to Australian reservoirs and other inland waters, no major obstacles were found in this review. The previous doubts stimulated research, which has provided evidence for unexpected mechanisms of food web interactions, such as positive effects of small copepods on planktonic algae, higher than usual grazing potential of cladoceran communities, and direct positive effects of planktivores on phytoplankton. Further research into zooplankton-cyanobacteria interactions should indicate how widespread is the previously reported ability of some southern hemisphere crustaceans to benefit at a population level from feeding on cyanobacteria. Quantitative fisheries acoustics, which has not been widely used in biomanipulation trials before, is a promising new tool in the assessment of the biomass of planktivorous fish in the pelagic zone of reservoirs.     

Mashing of rice with barley malt under non-conventional process conditions for use in food processes

Non-conventional mashing conditions are relevant in the development of a lactic acid-fermented soymilk beverage where mashed rice is the source of carbohydrates for the fermentation and sweetness of the beverage. Advantages in the process layout could be achieved by mashing at higher pH and lower malt concentrations than normally used in the brewing industry. the work reported here assessed the consequences of mashing under non-conventional conditions. Malt concentration in the cereal part was varied from 25% to 70% (w/w), pH was varied within 5.3 to 7.1, and prolongation of the holding times at 50°C and 62°C was investigated. Regression equations have been established for predicting yields of soluble protein, low molecular weight sugars and total fermentability as functions of pH and malt concentration. the results showed that the maltose yield was constant while glucose, maltotriose and total fermentable sugar yields decreased slightly with increasing pH and decreasing malt concentration. Prolonged mash holding times at 50°C and 62°C gave minor increases in protein yields only. It is concluded that it is quite acceptable to use non-conventional mashing conditions when a mashing step is integrated in other food processes.     

绿豆纤维功能饮料的工艺研究

探讨了新型保健绿豆纤维功能饮料的生产工艺,对影响产品品质的几个主要因素进行了较为深入的探讨,提出了生产绿豆纤维功能饮料的最佳工艺条件。     

Current and emerging molecular diagnostic technologies applicable to bacterial food safety

There is an increasing need for rapid test methods to certify the quality and safety of food products. Current tests applied for the microbiological assessment of food products are based on standard approved culture-based isolation methods and can take several days to yield results. Nucleic acid diagnostic (NAD) tests for the identification of bacterial foodborne pathogens employing in vitro amplification technologies are capable of sensitive and specific detection of single or multiple pathogens in foods in a shorter timeframe than traditional methods. New developments in molecular biosensors have the potential to provide at-line bioanalysis, whereas microarray-based technologies may in the future be the NAD platforms of choice for multiple pathogen detection and identification. This article reviews current and emerging NAD platforms for foodborne bacterial pathogens that have the potential to impact food safety.     

High‐pressure processing effects on the mechanical,barrier and mass transfer properties of food packaging flexible structures: a critical review

Food products can be high‐pressure processed (HPP) either in bulk or prepackaged in flexible or semi‐rigid packaging materials. In the latter case the packaging material is subjected, together with the food, to high‐pressure treatment. A number of studies have been performed to quantify the effects of high‐pressure processing on the physical and barrier properties of the packaging material, since the integrity of the package during and after processing is of paramount importance to the safety and quality of the food product. This article reviews the results of published research concerning the effect of HPP on packaging materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Innovation in milk powder technology

Global trade in preserved milks is on the increase as new markets open up in regions of the world that have not been traditionally associated with milk consumption. Equally, a rise in world milk production is forecasted to continue, and the indications are that significant quantities of the extra milk produced will be converted to commodity products such as butter and powders. Consequently, on-going investment in new spray drying capability is likely to track geographical shifts in milk production. Successful application of advanced process control to the operation of large scale drying plant is both a priority and a challenge.
  Meanwhile, opportunities for the exploitation of milk as a source of functional ingredients are being availed of by the dairy industry as it continues to achieve added value and unique key selling points. Recent research on the role of spray drying, along with other processes in the development of dairy ingredients for applications in chocolate and the preparation of microencapsulated powders, is reviewed.     

European intercomparison on electron spin resonance identification of irradiated foodstuffs

The results of a co-trial organized by the Community Bureau of Reference on the use of Electron Spin Resonance spectroscopy for the identification of irradiated food in 21 laboratories are presented. The trial was qualitative on beef and trout bones, sardine scales, pistachio nut shells, dried grapes, and papaya, and quantitative on poultry bones. There was no difficulty in identifying irradiated meat bones, dried grapes, and papaya. In the case of fish bones there is a need for further kinetic study on different species. Identification of irradiation in pistachio nuts is more complicated and additional research is needed before further trials. All laboratories were able to distinguish between chicken bones irradiated at 1 to 3 kGy or 7 to 10 kGy although there was a partial overlap between the results.     

食品中病原菌检测技术研究进展

介绍了许多食品安全检测新技术和新方法,包括生化检测技术、免疫学技术、PCR检测技术、生物芯片技术、传感器技术、流式细胞术和基因探针技术,并且阐述了食品安全检测技术的发展趋势,这些技术的发展将会在食品卫生检验方面起到越来越重要的作用,最终将达到预防肠道传染病和食物中毒发生的目的。